Export limit exceeded: 415698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 415698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 415698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 415698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 415698 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17657 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38614 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: traps: Don't send signals to kernel mode threads OpenRISC exception handling sends signals to user processes on floating point exceptions and trap instructions (for debugging) among others. There is a bug where the trap handling logic may send signals to kernel threads, we should not send these signals to kernel threads, if that happens we treat it as an error. This patch adds conditions to die if the kernel receives these exceptions in kernel mode code. | ||||
| CVE-2024-38607 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: macintosh/via-macii: Fix "BUG: sleeping function called from invalid context" The via-macii ADB driver calls request_irq() after disabling hard interrupts. But disabling interrupts isn't necessary here because the VIA shift register interrupt was masked during VIA1 initialization. | ||||
| CVE-2025-11069 | 1 Westboy | 1 Cicadascms | 2025-10-03 | 2.4 Low |
| A vulnerability was determined in westboy CicadasCMS 1.0. Affected by this issue is some unknown functionality of the file /system/org/save of the component Add Department Handler. This manipulation of the argument Name causes cross site scripting. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. | ||||
| CVE-2025-11068 | 1 Westboy | 1 Cicadascms | 2025-10-03 | 2.4 Low |
| A vulnerability was found in westboy CicadasCMS 1.0. Affected by this vulnerability is an unknown functionality of the file /system/cms/category/save. The manipulation of the argument categoryName results in cross site scripting. The attack can be executed remotely. The exploit has been made public and could be used. | ||||
| CVE-2025-11067 | 1 Projectworlds | 1 Visitor Management System | 2025-10-03 | 2.4 Low |
| A vulnerability has been found in Projectworlds Visitor Management System 1.0. Affected is an unknown function of the file /myform.php of the component Add Visitor Page. The manipulation of the argument Name leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-40923 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vmxnet3: disable rx data ring on dma allocation failure When vmxnet3_rq_create() fails to allocate memory for rq->data_ring.base, the subsequent call to vmxnet3_rq_destroy_all_rxdataring does not reset rq->data_ring.desc_size for the data ring that failed, which presumably causes the hypervisor to reference it on packet reception. To fix this bug, rq->data_ring.desc_size needs to be set to 0 to tell the hypervisor to disable this feature. [ 95.436876] kernel BUG at net/core/skbuff.c:207! [ 95.439074] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 95.440411] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.9.3-dirty #1 [ 95.441558] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018 [ 95.443481] RIP: 0010:skb_panic+0x4d/0x4f [ 95.444404] Code: 4f 70 50 8b 87 c0 00 00 00 50 8b 87 bc 00 00 00 50 ff b7 d0 00 00 00 4c 8b 8f c8 00 00 00 48 c7 c7 68 e8 be 9f e8 63 58 f9 ff <0f> 0b 48 8b 14 24 48 c7 c1 d0 73 65 9f e8 a1 ff ff ff 48 8b 14 24 [ 95.447684] RSP: 0018:ffffa13340274dd0 EFLAGS: 00010246 [ 95.448762] RAX: 0000000000000089 RBX: ffff8fbbc72b02d0 RCX: 000000000000083f [ 95.450148] RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000083f [ 95.451520] RBP: 000000000000002d R08: 0000000000000000 R09: ffffa13340274c60 [ 95.452886] R10: ffffffffa04ed468 R11: 0000000000000002 R12: 0000000000000000 [ 95.454293] R13: ffff8fbbdab3c2d0 R14: ffff8fbbdbd829e0 R15: ffff8fbbdbd809e0 [ 95.455682] FS: 0000000000000000(0000) GS:ffff8fbeefd80000(0000) knlGS:0000000000000000 [ 95.457178] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.458340] CR2: 00007fd0d1f650c8 CR3: 0000000115f28000 CR4: 00000000000406f0 [ 95.459791] Call Trace: [ 95.460515] <IRQ> [ 95.461180] ? __die_body.cold+0x19/0x27 [ 95.462150] ? die+0x2e/0x50 [ 95.462976] ? do_trap+0xca/0x110 [ 95.463973] ? do_error_trap+0x6a/0x90 [ 95.464966] ? skb_panic+0x4d/0x4f [ 95.465901] ? exc_invalid_op+0x50/0x70 [ 95.466849] ? skb_panic+0x4d/0x4f [ 95.467718] ? asm_exc_invalid_op+0x1a/0x20 [ 95.468758] ? skb_panic+0x4d/0x4f [ 95.469655] skb_put.cold+0x10/0x10 [ 95.470573] vmxnet3_rq_rx_complete+0x862/0x11e0 [vmxnet3] [ 95.471853] vmxnet3_poll_rx_only+0x36/0xb0 [vmxnet3] [ 95.473185] __napi_poll+0x2b/0x160 [ 95.474145] net_rx_action+0x2c6/0x3b0 [ 95.475115] handle_softirqs+0xe7/0x2a0 [ 95.476122] __irq_exit_rcu+0x97/0xb0 [ 95.477109] common_interrupt+0x85/0xa0 [ 95.478102] </IRQ> [ 95.478846] <TASK> [ 95.479603] asm_common_interrupt+0x26/0x40 [ 95.480657] RIP: 0010:pv_native_safe_halt+0xf/0x20 [ 95.481801] Code: 22 d7 e9 54 87 01 00 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa eb 07 0f 00 2d 93 ba 3b 00 fb f4 <e9> 2c 87 01 00 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 [ 95.485563] RSP: 0018:ffffa133400ffe58 EFLAGS: 00000246 [ 95.486882] RAX: 0000000000004000 RBX: ffff8fbbc1d14064 RCX: 0000000000000000 [ 95.488477] RDX: ffff8fbeefd80000 RSI: ffff8fbbc1d14000 RDI: 0000000000000001 [ 95.490067] RBP: ffff8fbbc1d14064 R08: ffffffffa0652260 R09: 00000000000010d3 [ 95.491683] R10: 0000000000000018 R11: ffff8fbeefdb4764 R12: ffffffffa0652260 [ 95.493389] R13: ffffffffa06522e0 R14: 0000000000000001 R15: 0000000000000000 [ 95.495035] acpi_safe_halt+0x14/0x20 [ 95.496127] acpi_idle_do_entry+0x2f/0x50 [ 95.497221] acpi_idle_enter+0x7f/0xd0 [ 95.498272] cpuidle_enter_state+0x81/0x420 [ 95.499375] cpuidle_enter+0x2d/0x40 [ 95.500400] do_idle+0x1e5/0x240 [ 95.501385] cpu_startup_entry+0x29/0x30 [ 95.502422] start_secondary+0x11c/0x140 [ 95.503454] common_startup_64+0x13e/0x141 [ 95.504466] </TASK> [ 95.505197] Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ip ---truncated--- | ||||
| CVE-2022-48814 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: seville: register the mdiobus under devres As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Seville VSC9959 switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the seville switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The seville driver has a code structure that could accommodate both the mdiobus_unregister and mdiobus_free calls, but it has an external dependency upon mscc_miim_setup() from mdio-mscc-miim.c, which calls devm_mdiobus_alloc_size() on its behalf. So rather than restructuring that, and exporting yet one more symbol mscc_miim_teardown(), let's work with devres and replace of_mdiobus_register with the devres variant. When we use all-devres, we can ensure that devres doesn't free a still-registered bus (it either runs both callbacks, or none). | ||||
| CVE-2022-48813 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The Felix VSC9959 switch is a PCI device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the felix switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The felix driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc_size() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. | ||||
| CVE-2022-48812 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: lantiq_gswip: don't use devres for mdiobus As explained in commits: 74b6d7d13307 ("net: dsa: realtek: register the MDIO bus under devres") 5135e96a3dd2 ("net: dsa: don't allocate the slave_mii_bus using devres") mdiobus_free() will panic when called from devm_mdiobus_free() <- devres_release_all() <- __device_release_driver(), and that mdiobus was not previously unregistered. The GSWIP switch is a platform device, so the initial set of constraints that I thought would cause this (I2C or SPI buses which call ->remove on ->shutdown) do not apply. But there is one more which applies here. If the DSA master itself is on a bus that calls ->remove from ->shutdown (like dpaa2-eth, which is on the fsl-mc bus), there is a device link between the switch and the DSA master, and device_links_unbind_consumers() will unbind the GSWIP switch driver on shutdown. So the same treatment must be applied to all DSA switch drivers, which is: either use devres for both the mdiobus allocation and registration, or don't use devres at all. The gswip driver has the code structure in place for orderly mdiobus removal, so just replace devm_mdiobus_alloc() with the non-devres variant, and add manual free where necessary, to ensure that we don't let devres free a still-registered bus. | ||||
| CVE-2022-48799 | 2 Linux, Redhat | 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix list corruption in perf_cgroup_switch() There's list corruption on cgrp_cpuctx_list. This happens on the following path: perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list) cpu_ctx_sched_in ctx_sched_in ctx_pinned_sched_in merge_sched_in perf_cgroup_event_disable: remove the event from the list Use list_for_each_entry_safe() to allow removing an entry during iteration. | ||||
| CVE-2022-48798 | 1 Linux | 1 Linux Kernel | 2025-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/cio: verify the driver availability for path_event call If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call. | ||||
| CVE-2025-11119 | 2 Angeljudesuarez, Itsourcecode | 2 Hostel Management System, Hostel Management System | 2025-10-03 | 4.3 Medium |
| A security flaw has been discovered in itsourcecode Hostel Management System 1.0. Impacted is an unknown function of the file /justines/index.php of the component POST Request Handler. Performing manipulation of the argument from results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been released to the public and may be exploited. | ||||
| CVE-2025-1497 | 1 Mljar | 1 Plotai | 2025-10-03 | 9.8 Critical |
| A vulnerability, that could result in Remote Code Execution (RCE), has been found in PlotAI. Lack of validation of LLM-generated output allows attacker to execute arbitrary Python code. Vendor commented out vulnerable line, further usage of the software requires uncommenting it and thus accepting the risk. The vendor does not plan to release a patch to fix this vulnerability. | ||||
| CVE-2025-5513 | 1 Quequnlong | 1 Shiyi-blog | 2025-10-03 | 3.5 Low |
| A vulnerability has been found in quequnlong shiyi-blog up to 1.2.1 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /dev-api/api/comment/add. The manipulation of the argument content leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-2173 | 1 Zapping-vbi | 1 Zvbi | 2025-10-03 | 5.3 Medium |
| A vulnerability was found in libzvbi up to 0.2.43. It has been classified as problematic. Affected is the function vbi_strndup_iconv_ucs2 of the file src/conv.c. The manipulation of the argument src_length leads to uninitialized pointer. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 0.2.44 is able to address this issue. The patch is identified as 8def647eea27f7fd7ad33ff79c2d6d3e39948dce. It is recommended to upgrade the affected component. The code maintainer was informed beforehand about the issues. She reacted very fast and highly professional. | ||||
| CVE-2025-10234 | 1 Scada-lts | 1 Scada-lts | 2025-10-02 | 2.4 Low |
| A vulnerability was detected in Scada-LTS up to 2.7.8.1. This vulnerability affects unknown code of the file /data_point_edit.shtm of the component Data Point Edit Module. The manipulation of the argument Text Renderer properties results in cross site scripting. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-10235 | 1 Scada-lts | 1 Scada-lts | 2025-10-02 | 2.4 Low |
| A flaw has been found in Scada-LTS up to 2.7.8.1. This issue affects some unknown processing of the file /reports.shtm of the component Reports Module. This manipulation of the argument Colour causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-10366 | 1 Sourcefabric | 2 Phoniebox, Rpi-jukebox-rfid | 2025-10-02 | 3.5 Low |
| A flaw has been found in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected is an unknown function of the file /htdocs/inc.setWlanIpMail.php. This manipulation of the argument Email address causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-11112 | 1 Phpgurukul | 1 Employee Record Management System | 2025-10-02 | 4.3 Medium |
| A security vulnerability has been detected in PHPGurukul Employee Record Management System 1.3. This impacts an unknown function of the file /myprofile.php. Such manipulation of the argument First name leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. | ||||
| CVE-2025-10271 | 2 10oa, Erjinzhi | 2 10oa, 10oa | 2025-10-02 | 4.3 Medium |
| A vulnerability was found in erjinzhi 10OA 1.0. This impacts an unknown function of the file /trial/mvc/finder. The manipulation of the argument Name results in cross site scripting. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||