| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: dce100: skip non-DP stream encoders for DP MST
On DCE8-class ASICs (e.g. Bonaire), the resource pool contains digital
DIG stream encoders plus one analog DAC encoder. When assigning a stream
encoder for a second DisplayPort MST stream, if the preferred digital
encoder is already acquired, dce100_find_first_free_match_stream_enc_for_link()
falls back to the first free pool entry. That entry may be the analog
encoder, whose funcs table lacks DP hooks such as dp_set_stream_attribute.
The subsequent atomic commit then dereferences NULL function pointers in
link_set_dpms_on() and crashes.
Skip encoders without dp_set_stream_attribute when the stream uses a DP
signal (including MST). Use dc_is_dp_signal(stream->signal) for the MST
fallback path instead of checking only the link connector signal.
Tested on:
- GPU: AMD Radeon R7 260X (Bonaire / DCE8)
- Board: Supermicro C9X299-PG300
- Setup: DP MST daisy chain, hotplug second monitor or have it connected on boot
- Kernel: 7.1.3 (issue observed since 6.19)
- Result: kernel oops without patch; dual monitors stable with patch
(cherry picked from commit 28ec64943e3ee4d9b8d30cea61e380f1429953a8) |
| In the Linux kernel, the following vulnerability has been resolved:
media: mali-c55: Fix possible ERR_PTR in enable_streams
The media_pad_remote_pad_unique() function returns either a valid
pointer or an ERR_PTR() on failure (-ENOTUNIQ if multiple links are
enabled, -ENOLINK if no connected pad is found). The return value
was assigned directly to isp->remote_src and dereferenced in the
next line without checking for errors, which could lead to an
ERR_PTR dereference.
Add proper error checking with IS_ERR() before dereferencing the
pointer. Also set isp->remote_src to NULL on error to maintain
consistency with other error paths in the function. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: alvium: fix critical pointer access in alvium_ctrl_init
The current implementation of alvium_ctrl_init creates several controls in
function alvium_ctrl_init and uses the returned pointer without check. That
can cause write access over NULL-pointer for several controls. The reworked
code checks the pointers before adding flags. |
| In the Linux kernel, the following vulnerability has been resolved:
media: ti: vpe: Fix the error code of devm_kzalloc() in vip_probe_slice()
In vip_probe_slice(), the error check for devm_kzalloc() incorrectly
uses PTR_ERR_OR_ZERO() which returns 0 for NULL pointer.
Return -ENOMEM for devm_kzalloc() failure. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Versions 1.7.14 through 1.7.17 are vulnerable to a nil-pointer panic triggered by a protobuf Transaction whose embedded RawData sub-message is omitted. This omission causes RawData to decode to nil. Every transaction gossiped on the Klever-Go P2P network is decoded and validated synchronously inside the libp2p pubsub topic-validator callback, where txVersionChecker.CheckTxVersion dereferences tx.RawData.Version with no nil check. Because the libp2p pubsub callback, the underlying go-libp2p-pubsub validation worker, and Klever's own network/p2p layer install no recover(), the panic propagates and crashes the entire node process. The attacker payload is a 3-byte protobuf message; no validator key, stake, funds, or on-chain account is required, and delivery aimed at enough of the BLS validator set can halt block production, resulting in a chain halt. This issue has been fixed in version 1.7.18. |
| NexTor IP Changer is a command-line tool that leverages the Tor network to periodically rotate a user's IP address. Versions prior to 2.0.0 have a command execution vulnerability due to unsafe use of `shell=True` with commands that rely on executable resolution through the `PATH` environment variable. An attacker controlling the execution environment can place malicious executables such as sudo earlier in the `PATH`, resulting in execution of attacker-controlled code. Version 2.0.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: Fix error code in smb2_aead_req_alloc()
The "*num_sgs" variable is a u32 so "ERR_PTR(*num_sgs)" doesn't work.
We would have to do something similar to the previous line where it's
cast to int and then long. However, it's simpler to store the return in
an int ret variable.
This bug would eventually result in a crash when dereference the invalid
error pointer. |
| The WP Hotel Booking WordPress plugin before 2.3.3 does not ensure that room quantities and the resulting order total are non-negative when placing a booking, and relies on client-controlled cart data, allowing unauthenticated users to create confirmed reservations for free or at an arbitrarily reduced price. |
| Software installed and run as a non-privileged user may conduct improper GPU system calls to trigger OOB access and kernel null pointer dereference in an error path.
Null pointer dereference occurs in an error path of a function running in kernel thread of execution leading to kernel exceptions, platform instability and denial of service. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to 5.74.1 and 6.24.0, manipulating user-supplied input incorporated into Antlers templates could result in the loss of content and assets, on sites whose templates pass untrusted input into affected areas, and exploitation did not require authentication. This issue is fixed in versions 5.74.1 and 6.24.0. |
| The WPC Name Your Price for WooCommerce WordPress plugin before 2.2.5 does not enforce its server-side price allowlist for products configured in "Select" price mode, allowing an unauthenticated visitor to add such a product to the cart at an arbitrary value below the merchant-defined allowed prices and commit a real order at that price (revenue loss / underpriced orders). This is a distinct, unfixed vector from CVE-2025-12115, whose 2.2.0 fix only addressed applying a custom price to products where Name Your Price is disabled and left the Select-mode allowlist unenforced through 2.2.4. |
| The CoCart WordPress plugin before 4.9.0 does not validate a user-supplied price value against the actual product price when items are added to the cart through one of its public REST API endpoints, allowing unauthenticated users to set arbitrary product prices and complete WooCommerce orders at manipulated totals. |
| The Event Booking Manager for WooCommerce (Pro) WordPress plugin before 5.0.3 does not validate the ticket price on the server during its native (non-WooCommerce) checkout, trusting the per-ticket price supplied by the client instead of re-deriving the event's configured price. This allows unauthenticated users to book paid event tickets for free, obtaining completed bookings and valid tickets at no cost. |
| Authentication bypass by assumed-immutable data in ASP.NET Core allows an authorized attacker to elevate privileges over a network. |
| Null pointer dereference in Windows SMB Server allows an authorized attacker to deny service over a network. |
| NULL pointer dereference in H5Pget_fill_value in HDF5 before 2.3.0 allows attackers to cause a denial of service via a dataset whose version 1 or 2 fill value message has the "defined" flag set together with a negative size field, which is not normalized to the library's "undefined" sentinel and reaches H5T_path_find with a NULL datatype. |
| Modification of assumed-immutable data (maid) in Azure Active Directory allows an authorized attacker to elevate privileges over a network. |
| In open62541 v1.5.5, the server-side AddReferences implementation contains an incomplete validation flaw for non-local ExpandedNodeId targets. A remote attacker can send a crafted AddReferencesRequest with an empty targetServerUri and a non-zero targetNodeId.serverIndex, causing the target node pointer to remain NULL while execution continues. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: spear: Initialize completion before requesting IRQ
In the report from Jaeyoung Chung:
"spear_adc_probe() in drivers/iio/adc/spear_adc.c registers its
interrupt handler with devm_request_irq() before it initializes
st->completion with init_completion(). If an interrupt arrives after
devm_request_irq() and before init_completion(), the handler calls
complete() on an uninitialized completion, causing a kernel panic.
The probe path, in spear_adc_probe():
iodev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); /* st kzalloc-zeroed */
...
retval = devm_request_irq(&pdev->dev, irq, spear_adc_isr, 0,
LPC32XXAD_NAME, st); /* register handler */
...
init_completion(&st->completion); /* initialize completion */
spear_adc_isr() calls complete():
complete(&st->completion);
If the device raises an interrupt before init_completion() runs,
complete() acquires the uninitialized wait.lock and walks the zeroed
task_list in swake_up_locked(). The zeroed task_list makes list_empty()
return false, so swake_up_locked() dereferences a NULL list entry,
triggering a KASAN wild-memory-access."
Fix the chance of a spurious IRQ causing an uninitialized pointer
dereference by moving init_completion() above devm_request_irq(). |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: mm: Unconditionally sfence.vma for spurious fault
Svvptc does not guarantee that it's safe to just return here. Since we
have already cleared our bit, if, theoretically, the bounded timeframe
for the accessed page to become valid still hasn't happened after sret,
we could fault again and actually crash.
Hopefully, these spurious faults should be rare enough that this is an
acceptable slowdown. |
