| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Ensure SRAM size is 0 on mapping failure
On a mapping failure of the SRAM, the SRAM size is left as non-zero. The
probe will succeed as the error return is not checked since having SRAM is
not a hard requirement. The non-zero size allows jobs to access SRAM which
is left pointing to physical base address 0x0. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Fix PCI device reference counting in amd_smn_init()
The local "root" pointer is a temporary variable used during the device
search. Therefore, refcount related to the search iterators should be cleaned
up after the search is complete.
Use the __free() cleanup macro to ensure the refcount is decremented when the
temporary pointer goes out of scope.
Additionally, increment the refcount when caching a root pointer. This ensures
the in-use refcount is separate from the temporary search refcounting.
Finally, drop the redundant "root = NULL" before the second search loop. The
pci_get_class() iterator always decrements the refcount of its "from"
argument, so the first loop can only fall through with "root" already NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: put the "mdio" child node reference on success
macb_mii_init() holds the reference returned by of_get_child_by_name()
for macb_mdiobus_register() and drops it only on the error paths, so
every successful probe leaks a node reference. On a CM5, overlay
removal after four bind cycles reports
OF: ERROR: memory leak, expected refcount 1 instead of 5
Drop the reference after registration, where __mdiobus_register() has
already taken its own for the lifetime of the bus. |
| CloudTAK is a browser-based Common Operating Picture and situational awareness tool compatible with TAK. Prior to version 13.10.0, every route in the ESRI helper family (api/routes/esri.ts) takes a fully attacker-controlled URL from the request (POST /api/esri body url, and the portal / server / layer query parameters on the GET /api/esri/* routes) and passes it into EsriBase / EsriProxyPortal / EsriProxyServer / EsriProxyLayer in api/lib/esri.ts, which fetch it with the bare fetch from @tak-ps/etl. No IP / DNS / hostname classification is applied at any point, so the destination is never validated against private, loopback, or link-local ranges. Any authenticated user (the routes only require Auth.is_auth(config, req, { anyResources: true }), i.e. any token, not an admin) can therefore make the CloudTAK server issue arbitrary outbound GET/POST requests to internal addresses such as the cloud instance-metadata service (169.254.169.254), loopback admin ports (127.0.0.1:<port>), and other hosts reachable only from inside the deployment VPC. This is a full-read SSRF, not blind: on success the upstream JSON body is returned to the caller via res.json(...), and on failure the upstream error string is reflected verbatim as ESRI Server Error: <message>. An attacker can read cloud metadata (and the temporary IAM credentials the instance role exposes), enumerate internal services, and exfiltrate their response bodies. The sniff() URL classifier provides no protection: it only pattern-matches the pathname (/rest, /arcgis/rest, /sharing/rest), so a URL like http://169.254.169.254/arcgis/rest or http://127.0.0.1:8500/rest passes sniff() and is fetched. This issue has been patched in version 13.10.0. |
| A vulnerability was detected in Krayin laravel-crm up to 2.2.5. Impacted is an unknown function of the file packages/Webkul/Admin/src/Resources/views/components/layouts/index.blade.php of the component Admin Settings Endpoint. Performing a manipulation of the argument general.settings.footer.label results in cross site scripting. The attack can be initiated remotely. The exploit is now public and may be used. Upgrading to version 2.2.6 is recommended to address this issue. The patch is named 6dbcf75b30dbd169ee81b7e9e00368099124efeb. You should upgrade the affected component. |
| python-utcp (pip package utcp-http) before 1.1.12 does not verify whether tool URLs declared in a hand-written UTCP manual point at the agent's own loopback interface when that manual is discovered from a remote, non-loopback origin. Because ensure_secure_url intentionally permits loopback HTTP for local development and native manuals bypassed the loopback check performed by the OpenAPI converter, an attacker who can serve a UTCP manual that a victim registers can cause the client to issue requests to services bound only to 127.0.0.1 on the victim host and have the response bodies returned to the caller (server-side request forgery). The http, sse and streamable_http protocols are all affected. Reach is limited to loopback, and exploitation further requires a loopback service that answers unauthenticated requests with useful data. Fixed in utcp-http 1.1.12, which rejects manuals fetched from a non-loopback origin that declare loopback tool URLs, keyed off the final post-redirect discovery URL. |
| JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From JupyterLab 4.0.0 until 4.5.11 and 4.6.4, the PyPI Extension Manager uninstall request reaches ExtensionHandler.post, which validates extension names for installation but passes uninstall names to PyPIExtensionManager.uninstall and python -m pip uninstall without rejecting option-like values. The security impact requires that the PyPI Extension Manager is enabled, the account can call the extension API, and kernels and terminals are disabled or delegated to remote hosts; otherwise the user can already read files and make outbound requests directly. An authenticated user with extension API access can supply a pip requirements option to make the server read a local file or fetch an internal URL, and reflected parse errors can return the first unparsable line or response content. A pip log option can also create or corrupt a chosen path with pip-generated log text, but the requester cannot select an arbitrary disclosed line or arbitrary file content, and the injection does not add code execution or availability impact beyond ordinary package removal. This issue is fixed in JupyterLab 4.5.11 and 4.6.4. |
| ImageMagick versions before 7.1.2-32 and 6.9.13-57 contain uninitialized heap memory disclosure in the GIF decoder's application extension handler in coders/gif.c. Attackers can craft malicious GIF files that cause the number parser to read uninitialized heap memory and store contents as image metadata, disclosing sensitive heap information. |
| Improper neutralization of CRLF sequences in IMAP command construction in psyb0t/docker-mailbox before 0.4.13 allows a remote unauthenticated attacker, when bearer-token authentication is not configured, to inject additional IMAP commands into an authenticated upstream mailbox connection via crafted folder, UID, or search values. |
| In the IPv4 PASV path, the FTP Client accepts whatever address was sent in the server's `227` reply. Validation only covers the parse and the non-zero values, thus a malicious server can name any address and direct the Client there. |
| FTP Passive Data Connection Not Bound to the Authenticated Control Peer |
| In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, an unauthenticated network check function can be triggered to probe arbitrary hosts from the device’s internal network. This may expose internal information or leak data via DNS queries. |
| Fider before 0.38.0 contains a server-side request forgery vulnerability due to a time-of-check time-of-use gap in URL validation for webhooks and custom OAuth provider endpoints. Administrators controlling DNS can perform DNS rebinding attacks to make the Fider server send requests to internal services or cloud metadata endpoints. |
| ClaraVerse through 0.3.1 contains server-side request forgery protection bypasses in the download_file and scrape_web agent tools. Authenticated users can bypass hostname validation and IPv6 transition address filtering to make the server request internal services and cloud instance metadata endpoints. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.7.13, the generated activate (bash and zsh) and activate.fish scripts place values already escaped by shlex.quote inside an additional quoted context. In the bash and zsh script, a crafted virtual environment path reaches __VIRTUAL_ENV__ when a relocated environment's recorded directory is absent; in the fish script, crafted Tcl or Tk library paths reach __TCL_LIBRARY__ or __TK_LIBRARY__. The surplus quotes can terminate the data-only quoted run and leave shell metacharacters parsed as commands when a user sources the activation script, allowing code execution with that user's privileges. This issue is fixed in version 21.7.13. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.7.11, PyEnvCfg.write() writes prompt values verbatim to the line-oriented pyvenv.cfg format while PyEnvCfg._read_values() parses the file with str.splitlines() and accepts the last value for duplicate keys. An attacker who influences --prompt, VIRTUALENV_PROMPT, or configuration input can insert a recognized line boundary and additional keys, including home, causing consumers to use an attacker-selected base interpreter or corrupted environment metadata. The security impact requires prompt input from outside the operator's trust boundary; directly supplied prompt content primarily corrupts the operator's own environment. This issue is fixed in version 21.7.11. |
| The application uses unsafe functions that allow execution of inline scripts and string evaluation functions. |
| Authentication bypass via LDAP injection in component sshd-ldap in Apache MINA SSHD versions 1.2.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5.
Apache MINA SSHD is a Java library for client-side and server-side SSH.
The optional sshd-ldap component provides support for integrating
password and publickey authentication on the server side with an LDAP
server.
sshd-ldap is an optional component. SSH servers implemented with Apache
MINA SSHD are affected only if they use sshd-ldap and do configure it to be used for password of public key authentication.
Other Apache MINA SSHD servers are not affected.
Lack of escaping LDAP filter metacharacters enabled successful authentication with username "*" and password "*".
Users are recommended to upgrade affected applications to version 2.20.0 or 3.0.0-M6, which fix this issue by properly escaping filter parameters according to RFC 4515. |
| Astro is a web framework for content-driven websites. From 5.2.0 until 8.2.4, the @astrojs/netlify adapter generates regular expressions for Netlify Image CDN remote-image allowlists without anchoring them to the beginning of the URL. Because Netlify evaluates these expressions with RegExp.test(), an allowed origin appearing only in a source URL's path or query can satisfy image.domains or image.remotePatterns while the URL's actual host remains attacker-controlled. An unauthenticated request to the public /.netlify/images endpoint can therefore cause the Image CDN to request attacker-selected URLs and may probe or reach internal services. Netlify egress protections may constrain reachable targets, and image transformation limits direct response exfiltration; no confidentiality or integrity impact has been demonstrated. This issue is fixed in version 8.2.4. |
| JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From JupyterLab 3.0.0 until 4.5.11 and 4.6.4, and in JupyterLite Core 0.8.3 and earlier, the Plural-Forms header in a selected third-party language pack can append JavaScript after a valid plural rule because prefix-only regular-expression validation accepts a matching prefix without requiring the entire header to match. JupyterLab passes the accepted expression to new Function, so loading the catalogue and translating a plural string executes the appended code in the authenticated JupyterLab origin. Where Jupyter Server kernels, terminals, and APIs are exposed, the code can use authenticated server APIs to read or modify files and run code. Impact is much more limited in JupyterLite because it typically lacks most exposed Jupyter Server surfaces. The default English locale is unaffected because it does not load a translation catalogue. This issue is fixed in JupyterLab 4.5.11 and 4.6.4 and JupyterLite Core 0.8.4. |
