| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| U-Boot through 2026.10-rc5 contains an out-of-bounds write vulnerability in the video_display_rle8_bitmap function in drivers/video/video_bmp.c. Attackers can supply a crafted RLE8-compressed BMP image to corrupt memory adjacent to the framebuffer and crash the bootloader. |
| Integer Overflow, Improper Validation of Array Index, Uncontrolled Recursion and Memory Allocation with Excessive Size Value in the Go implementation of Apache PLC4X (PLC4Go) allow a malicious device, or an attacker able to inject network traffic, to crash or exhaust the memory of the client application,
causing a denial of service.
The individual defects are:
- Generated parsers pre-allocate arrays with the element count claimed on the wire (0.13.0 through 0.13.1).
- Transport read helpers allocate buffers of the size claimed on the wire without an upper bound.
- ADS and KNXnet/IP response handling indexes into received data without checking its length, causing a panic.
- ADS and EIP frame-length handling accepts, or arithmetically wraps to, a length of zero, breaking message framing.
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Java implementation is covered by CVE-2026-102509 https://cveprocess.apache.org/cve5/CVE-2026-102509 .
Additionally, length and position arithmetic in generated serializers was performed in 16-bit integers. If an application forwards attacker-influenced payloads larger than 8 KB, the length field wraps, and the remainder of the payload may be interpreted by the receiving device (for example, an ADS PLC) as
additional, independent protocol messages.
This issue affects Apache PLC4X: from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service.
In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can
impersonate it.
The individual defects are:
- Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1).
- Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1).
- The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1).
- The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1).
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 .
This issue affects Apache PLC4X: from 0.10.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Out of bounds write in WebGL in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Out of bounds write in GPU in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| A vulnerability was identified in HKUDS AnyTool 0.1.0. Affected is the function subprocess.run of the file anytool/local_server/main.py of the component Execute Endpoint. The manipulation of the argument command/shell leads to os command injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| U-Boot before 2026.10-rc3 with CONFIG_IP_DEFRAG enabled contains an out-of-bounds write vulnerability in the __net_defragment() function in net/net.c. Remote attackers can send a crafted IP fragment with non-zero offset and More-Fragments flag set during netboot to corrupt adjacent memory and crash the bootloader. |
| Out of bounds write in GPU in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| BUFFALO Wi-Fi products handle some web form input improperly to assemble command line strings internally. An administrative user may send a crafted HTTP request and execute an arbitrary OS command. |
| When importing connections in Compass it is possible to override some connection options that are otherwise can't be changed via connection form. In particular it is possible to provide a custom browser open command for OIDC auth flow that is usually can be set only globally via Compass settings. |
| Buffer overflow in ANGLE in Google Chrome on on Android prior to 154.0.8037.92 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta->nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: fix out-of-bounds write in l2cap_ecred_connect
l2cap_chan_connect() tries to ensure there are no more than
L2CAP_ECRED_CONN_SCID_MAX pending ECRED channels, so they fit in the
same L2CAP_ECRED_CONN_REQ that l2cap_ecred_connect() constructs.
However, the check only counts deferred channels. If 6 L2CAP sockets
are connected at the same time in order DDDDND (D=deferred,
N=non-deferred), the last can bump the total to max+1. It results to
one __le16 written out of bounds of the scid array, and an invalid
ECRED_CONN_REQ being sent.
Fix by leaving room for the non-deferred pending ECRED channels in the
counting in l2cap_chan_connect(), so the limit can't be exceeded.
Move counting under same critical section where the channel is added.
Although race conditions involving this appear unreachable, it's easier
to see.
Also add WARN_ON_ONCE check in l2cap_ecred_defer_connect() to make this
less brittle. |
| A flaw was found in dash. The printf builtin reserves four bytes before converting a Unicode \u or \U escape, but the multi-byte token can need five or six bytes. A local user who can supply such an escape to dash printf or echo %b, including through dash -c and a positional argument, can write one or two bytes past that reservation. |
| CliInvoke is a .NET library for invoking command-line programs, and its `CliInvoke.Specializations` packages provide specialized wrappers for shells such as PowerShell and Windows Command Prompt. `CliInvoke.Specializations` versions 2.2.0 through 2.8.4, 2.9.0 through 2.9.3, 2.10.0 through 2.10.4, 3.0.0-alpha.1 through 3.0.0-alpha.4, and 3.0.0-alpha.8 through 3.0.0-alpha.10, as well as `AlastairLundy.CliInvoke.Specializations` versions 1.0.0-rc.1 through 1.6.1.1, contain an OS command injection vulnerability in their PowerShell and Cmd wrappers. The wrappers pass a caller-controlled target and arguments to `pwsh -Command` or `cmd /c` using a single `ProcessStartInfo.Arguments` string, allowing a double quote in untrusted input to break operating-system-level quoting and cause the shell to execute an additional command with the host process's privileges. The vulnerability is patched in `CliInvoke.Specializations` versions 2.8.5, 2.9.4, 2.10.5, and 3.0.0-beta.1, and in `AlastairLundy.CliInvoke.Specializations` version 2.0.2. No complete workaround is available; users unable to upgrade should reject or remove double quotes from target paths and arguments, additionally reject shell metacharacters in versions 2.2.0 through 2.9.2 and 3.0.0-alpha.1 through 3.0.0-alpha.4, or bypass the PowerShell and Cmd wrappers and invoke target processes directly when handling untrusted input. |
| Renovate versions 37.158.0 before 37.199.0 contain a command injection vulnerability in the helmv3 manager's registryAliases handling that allows attackers with commit access to execute arbitrary commands. Attackers can manipulate registryAliases keys with unquoted shell metacharacters to inject commands executed during helm repo add operations, gaining full access to Renovate's execution environment. |
| Renovate versions from 43.65.0 before 43.102.11 contain a remote code execution vulnerability in bazel-module and bazelisk managers when using lockFileMaintenance. Attackers can execute arbitrary code by providing malicious dependencies that are referenced in bazel mod deps calls, such as within ctx.execute statements. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: bound the ntuple rule dump by the caller's buffer size
nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[]
without consulting cmd->rule_cnt, which is how many entries the caller
had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the
ioctl sizes the buffer from the rule_cnt userspace passes in, so once an
admin has installed flow steering rules any user can ask for fewer slots
than there are rules and run off the end of the allocation. A rule_cnt
of 0 leaves the buffer pointer NULL and the walk dereferences it.
Bail out with -EMSGSIZE when the buffer fills up, the way the other
ntuple capable drivers do, and report how many locations were filled so
a shrinking rule list does not leave the caller reading stale slots. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't resurrect a scalar id dropped by collect_linked_regs()
check_cond_jmp_op() copies the compared registers into
env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies
those snapshots back into both branch states afterwards.
collect_linked_regs() records at most LINKED_REGS_MAX members of a
linked registers group in the jump history and calls clear_scalar_id()
for every member that does not fit. The compared register is not exempt
from that.
As a consequence, sync_linked_regs() might adjust ranges for more
registers than bpf_bt_sync_linked_regs() can propagate precision to.
Collect the linked registers before the snapshots are taken instead.
This might lead to some unnecessary clear_scalar_id's, but from
previous testing situations with many linked registers are
extremely rare. |
| Any host on the LAN can send two mDNS records and make the responder write past the end of its
transmit packet.
The string table stores each name in a slot rounded up to a multiple of four:
```c
/* addons/mdns/nxd_mdns.c:11436, 11443, 11447 */
memory_len = ((memory_len & 0xFFFFFFFC) + 8) & 0xFFFFFFFF;
...
len = *((USHORT*)(p - 2)); /* slot size, not string length */
if ((len == memory_len) && ... _nx_mdns_name_match(start, memory_ptr, memory_size) ...)
```
The lookup that decides whether an incoming name is already stored compares the rounded slot size,
so names of 12, 13, 14 and 15 characters share one bucket. A second name in the bucket is answered
with the pointer to the first, and the record then carries a string up to three bytes longer than
the length the caller accounted for. `_nx_mdns_packet_rr_add` (nxd_mdns.c:8911) sizes its only
bound check from that stale length, and `_nx_mdns_name_string_encode` writes the real string.
Two PTR records are enough, both ordinary mDNS responses to a `_http._tcp` query, with owner names
whose lengths fall in the same bucket:
```
==87491==ERROR: AddressSanitizer: heap-buffer-overflow
WRITE of size 1 at 0x611000000124 thread T5
#0 _nx_mdns_name_string_encode addons/mdns/nxd_mdns.c:13096
#1 _nx_mdns_packet_rr_add addons/mdns/nxd_mdns.c:8911
0x611000000124 is 0 bytes to the right of 228-byte region
```
The overflow is one to three bytes of attacker-influenced name data past `nx_packet_data_end`. In a
normal pool that lands in the next packet in the same pool rather than in a redzone, so the visible
effect is a corrupted neighbouring packet or a corrupted pool free list rather than a clean crash.
Compare the slot size against the stored string length before declaring a match, or keep the
string length in the slot header and return it to the caller so the encoder and the bound check
agree. |
