Export limit exceeded: 408239 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3043 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-50285 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: check outstanding simultaneous SMB operations If Client send simultaneous SMB operations to ksmbd, It exhausts too much memory through the "ksmbd_work_cache”. It will cause OOM issue. ksmbd has a credit mechanism but it can't handle this problem. This patch add the check if it exceeds max credits to prevent this problem by assuming that one smb request consumes at least one credit. | ||||
| CVE-2024-43856 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma: fix call order in dmam_free_coherent dmam_free_coherent() frees a DMA allocation, which makes the freed vaddr available for reuse, then calls devres_destroy() to remove and free the data structure used to track the DMA allocation. Between the two calls, it is possible for a concurrent task to make an allocation with the same vaddr and add it to the devres list. If this happens, there will be two entries in the devres list with the same vaddr and devres_destroy() can free the wrong entry, triggering the WARN_ON() in dmam_match. Fix by destroying the devres entry before freeing the DMA allocation. kokonut //net/encryption http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03 | ||||
| CVE-2024-39482 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bcache: fix variable length array abuse in btree_iter btree_iter is used in two ways: either allocated on the stack with a fixed size MAX_BSETS, or from a mempool with a dynamic size based on the specific cache set. Previously, the struct had a fixed-length array of size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized iterators, which causes UBSAN to complain. This patch uses the same approach as in bcachefs's sort_iter and splits the iterator into a btree_iter with a flexible array member and a btree_iter_stack which embeds a btree_iter as well as a fixed-length data array. | ||||
| CVE-2024-35969 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007f ---truncated--- | ||||
| CVE-2024-34027 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock to avoid racing with checkpoint, otherwise, filesystem metadata including blkaddr in dnode, inode fields and .total_valid_block_count may be corrupted after SPO case. | ||||
| CVE-2024-26646 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: hfi: Add syscore callbacks for system-wide PM The kernel allocates a memory buffer and provides its location to the hardware, which uses it to update the HFI table. This allocation occurs during boot and remains constant throughout runtime. When resuming from hibernation, the restore kernel allocates a second memory buffer and reprograms the HFI hardware with the new location as part of a normal boot. The location of the second memory buffer may differ from the one allocated by the image kernel. When the restore kernel transfers control to the image kernel, its HFI buffer becomes invalid, potentially leading to memory corruption if the hardware writes to it (the hardware continues to use the buffer from the restore kernel). It is also possible that the hardware "forgets" the address of the memory buffer when resuming from "deep" suspend. Memory corruption may also occur in such a scenario. To prevent the described memory corruption, disable HFI when preparing to suspend or hibernate. Enable it when resuming. Add syscore callbacks to handle the package of the boot CPU (packages of non-boot CPUs are handled via CPU offline). Syscore ops always run on the boot CPU. Additionally, HFI only needs to be disabled during "deep" suspend and hibernation. Syscore ops only run in these cases. [ rjw: Comment adjustment, subject and changelog edits ] | ||||
| CVE-2023-52606 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/lib: Validate size for vector operations Some of the fp/vmx code in sstep.c assume a certain maximum size for the instructions being emulated. The size of those operations however is determined separately in analyse_instr(). Add a check to validate the assumption on the maximum size of the operations, so as to prevent any unintended kernel stack corruption. | ||||
| CVE-2021-47374 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-debug: prevent an error message from causing runtime problems For some drivers, that use the DMA API. This error message can be reached several millions of times per second, causing spam to the kernel's printk buffer and bringing the CPU usage up to 100% (so, it should be rate limited). However, since there is at least one driver that is in the mainline and suffers from the error condition, it is more useful to err_printk() here instead of just rate limiting the error message (in hopes that it will make it easier for other drivers that suffer from this issue to be spotted). | ||||
| CVE-2021-47137 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: lantiq: fix memory corruption in RX ring In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. | ||||
| CVE-2026-65650 | 1 Elgg | 1 Elgg | 2026-08-03 | 4.3 Medium |
| Elgg before 7.0.0 does not check image dimensions to prevent denial of service via a large avatar upload. | ||||
| CVE-2026-69152 | 1 Juliangruber | 1 Brace-expansion | 2026-08-03 | 7.5 High |
| The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.18, 2.1.4, 3.0.6, and 5.0.9, expand() does not apply maxLength while constructing comma-alternative intermediate arrays or padded sequences, allowing attacker-controlled input to exhaust memory or block the event loop. The fix for CVE-2026-14257 is bypassed by the vulnerability. This issue is fixed in versions 1.1.18, 2.1.4, 3.0.6, and 5.0.9. | ||||
| CVE-2026-67313 | 1 Axios | 1 Axios | 2026-08-03 | 7.5 High |
| axios versions 0.28.0 and later contain uncontrolled recursion in formDataToJSON when processing FormData field names with deeply nested bracket segments. Attackers can supply FormData with field names containing thousands of nested brackets to exhaust the JavaScript call stack and trigger RangeError, causing request failure or process termination in applications that do not handle the exception. | ||||
| CVE-2026-67297 | 1 Freerdp | 1 Freerdp | 2026-08-03 | 7.5 High |
| FreeRDP before 3.29.0 fails to enforce the RESPONSE_SIZE_LIMIT when processing Transfer-Encoding: chunked HTTP responses in http_response_recv_body(). Attackers controlling a malicious RD Gateway endpoint can send oversized chunked response bodies to exhaust client memory resources without triggering the configured size limit. | ||||
| CVE-2026-67353 | 1 Guzzlephp | 1 Guzzle | 2026-08-03 | 5.3 Medium |
| guzzlehttp/guzzle versions before 7.15.1 contain a denial of service vulnerability in the CookieJar that accepts unlimited Set-Cookie header fields with no size restrictions. Attackers can return many large cookies from a malicious server, causing Guzzle to store excessive data in memory and generate oversized Cookie headers that fail in handlers or destination servers. | ||||
| CVE-2026-54894 | 1 Ueberauth | 1 Guardian | 2026-08-03 | 7.5 High |
| Allocation of Resources Without Limits or Throttling in ueberauth guardian allows denial of service via unbounded atom creation from attacker-influenced binary input. Guardian.Plug.Keys derives connection and session namespace keys by passing arbitrary binaries to String.to_atom/1. base_key/1 in lib/guardian/plug/keys.ex converts any binary into the atom :"guardian_<input>", and the derived helpers claims_key/1, resource_key/1, and token_key/1 create a second atom on top of that. key_from_other/1 likewise converts a regex-captured binary through String.to_atom/1. The public specs advertise String.t() as a valid argument, so passing a string is documented usage, and higher-level entry points such as Guardian.Plug.current_token(conn, key: key) thread the caller-supplied key straight into these functions. String.to_atom/1 creates a brand-new atom for every previously unseen binary, atoms are never garbage collected, and the BEAM atom table is fixed at roughly 1,048,576 entries by default. An application that routes attacker-influenced data (a tenant identifier, header, or other request input) into a Guardian key therefore mints one permanent atom per distinct value. A modest stream of varied, unauthenticated input permanently consumes the atom table and crashes the BEAM node, taking down every application running on it. This issue affects guardian: from 0.1.0 before 2.4.1. | ||||
| CVE-2026-55733 | 1 Ueberauth | 1 Guardian | 2026-08-03 | 7.5 High |
| Allocation of Resources Without Limits or Throttling in ueberauth guardian allows denial of service via unbounded atom creation from attacker-controlled binary input. Guardian.Permissions.AtomEncoding encodes permission scopes by passing arbitrary binaries to String.to_atom/1. When encode/3 in lib/guardian/permissions/atom_encoding.ex is called with a list, each binary entry is handled by the encode_value/3 binary clause, which calls String.to_atom(value) with no allow-list check. The perm_set argument (the application's small, finite set of legitimate permission names) is discarded, so any external string flows straight into atom creation. This encoder is selected with use Guardian.Permissions, encoding: Guardian.Permissions.AtomEncoding and reached through the imported encode/3 entry point. String.to_atom/1 creates a brand-new atom for every previously unseen binary, atoms are never garbage collected, and the BEAM atom table is fixed at roughly 1,048,576 entries by default. An application that funnels attacker-influenced permission scopes (from a request body, a JWT claim, or other external input) into encode/3 therefore mints one permanent atom per distinct value. A modest stream of varied, unauthenticated input permanently consumes the atom table and crashes the BEAM node with system_limit, taking down every application running on it. The default encoder is Guardian.Permissions.BitwiseEncoding, which is not affected. This issue affects guardian: from 2.0.0 before 2.4.1. | ||||
| CVE-2026-55734 | 1 Ueberauth | 1 Guardian | 2026-08-03 | 7.5 High |
| Allocation of Resources Without Limits or Throttling vulnerability in ueberauth guardian (Guardian.Permissions module) allows a denial of service via BEAM atom-table exhaustion. This vulnerability is associated with program file lib/guardian/permissions.ex and program routines 'Elixir.Guardian.Permissions':encode_permissions!/1, 'Elixir.Guardian.Permissions':encode_permissions_into_claims!/2, 'Elixir.Guardian.Permissions':do_encode_permissions!/2. The Guardian.Permissions mixin installs a public encode_permissions!/1 function on every module that does use Guardian.Permissions. For each key of the supplied map, encode_permissions!/1 calls String.to_atom(to_string(k)) before any validation runs. The integer-value clause of do_encode_permissions!/2 then short-circuits straight to encoding without validating the key against the configured permission set, so a key with an integer value is interned as a fresh atom with no exception raised. Atoms are never garbage collected and the BEAM atom table is a fixed-size resource (default roughly 1,048,576 entries), so each unique attacker-chosen key permanently consumes one slot. An attacker who can influence a permission map that reaches encode_permissions!/1 (for example a permissions map read from a request body and passed into token issuance via encode_permissions_into_claims!/2) can mint an unbounded number of atoms and exhaust the atom table, crashing the entire BEAM node and every service running on it. The sibling decode_permissions/1 is not affected because it skips keys absent from the configured permission set. This issue affects guardian: from 2.0.0 before 2.4.1. | ||||
| CVE-2024-21539 | 1 Eslint | 1 Rewrite | 2026-08-03 | 7.5 High |
| Versions of the package @eslint/plugin-kit before 0.2.3 are vulnerable to Regular Expression Denial of Service (ReDoS) due to improper input sanitization. An attacker can increase the CPU usage and crash the program by exploiting this vulnerability. | ||||
| CVE-2026-67321 | 1 Axios | 1 Axios | 2026-08-03 | 7.5 High |
| axios versions 0.31.1 before 0.33.0 and 1.15.1 before 1.18.0 contain an incomplete depth-limit bypass in toFormData.js when serializing objects with top-level keys ending in '{}'. Attackers who control object keys and nested values passed to axios form or parameter serialization can trigger a RangeError from JSON.stringify, causing denial of service in the affected request path. | ||||
| CVE-2025-71401 | 1 Better-auth | 2 Better-auth\/oauth-provider, Better Auth | 2026-08-03 | 5.9 Medium |
| better-auth (npm) before 1.4.2 allows an external request to configure baseURL when it is not otherwise defined (e.g., BETTER_AUTH_URL is unset). An attacker able to make the very first request to the server after startup can poison the router's base path, causing all routes to return 404 for all users (denial of service). The issue is not reachable when baseURL is explicitly configured or on typical managed hosting platforms. | ||||