| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: remove clear SB_INLINECRYPT flag in default_options
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: don't read past the mfuart notifcation
In case the firmware sends a notification that claims it has more data
than it has, we will read past that was allocated for the notification.
Remove the print of the buffer, we won't see it by default. If needed,
we can see the content with tracing.
This was reported by KFENCE. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
Lion Ackermann reported that there is a race condition between namespace cleanup
in ipset and the garbage collection of the list:set type. The namespace
cleanup can destroy the list:set type of sets while the gc of the set type is
waiting to run in rcu cleanup. The latter uses data from the destroyed set which
thus leads use after free. The patch contains the following parts:
- When destroying all sets, first remove the garbage collectors, then wait
if needed and then destroy the sets.
- Fix the badly ordered "wait then remove gc" for the destroy a single set
case.
- Fix the missing rcu locking in the list:set type in the userspace test
case.
- Use proper RCU list handlings in the list:set type.
The patch depends on c1193d9bbbd3 (netfilter: ipset: Add list flush to cancel_gc). |
| In the Linux kernel, the following vulnerability has been resolved:
bcache: fix variable length array abuse in btree_iter
btree_iter is used in two ways: either allocated on the stack with a
fixed size MAX_BSETS, or from a mempool with a dynamic size based on the
specific cache set. Previously, the struct had a fixed-length array of
size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized
iterators, which causes UBSAN to complain.
This patch uses the same approach as in bcachefs's sort_iter and splits
the iterator into a btree_iter with a flexible array member and a
btree_iter_stack which embeds a btree_iter as well as a fixed-length
data array. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add error handle to avoid out-of-bounds
if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should
be stop to avoid out-of-bounds read, so directly return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix deadlock in smb2_find_smb_tcon()
Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such
deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
syzbot reports a kernel bug as below:
F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4
==================================================================
BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline]
BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076
CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
current_nat_addr fs/f2fs/node.h:213 [inline]
f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline]
f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925
ioctl_fiemap fs/ioctl.c:220 [inline]
do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838
__do_sys_ioctl fs/ioctl.c:902 [inline]
__se_sys_ioctl+0x81/0x170 fs/ioctl.c:890
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is we missed to do sanity check on i_xattr_nid during
f2fs_iget(), so that in fiemap() path, current_nat_addr() will access
nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering
kasan bug report, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
enic: Validate length of nl attributes in enic_set_vf_port
enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port. |
| In the Linux kernel, the following vulnerability has been resolved:
soundwire: cadence: fix invalid PDI offset
For some reason, we add an offset to the PDI, presumably to skip the
PDI0 and PDI1 which are reserved for BPT.
This code is however completely wrong and leads to an out-of-bounds
access. We were just lucky so far since we used only a couple of PDIs
and remained within the PDI array bounds.
A Fixes: tag is not provided since there are no known platforms where
the out-of-bounds would be accessed, and the initial code had problems
as well.
A follow-up patch completely removes this useless offset. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: fix invalid unregister error path
The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL
is not defined. In that case if seg6_hmac_init() fails, the
genl_unregister_family() isn't called.
This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control
lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible
use-after-free and null-ptr-deref") replaced unregister_pernet_subsys()
with genl_unregister_family() in this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
jffs2: prevent xattr node from overflowing the eraseblock
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: Fix sizeof() vs ARRAY_SIZE() bug
The "buf" pointer is an array of u16 values. This code should be
using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512),
otherwise it can the still got out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix potential glock use-after-free on unmount
When a DLM lockspace is released and there ares still locks in that
lockspace, DLM will unlock those locks automatically. Commit
fb6791d100d1b started exploiting this behavior to speed up filesystem
unmount: gfs2 would simply free glocks it didn't want to unlock and then
release the lockspace. This didn't take the bast callbacks for
asynchronous lock contention notifications into account, which remain
active until until a lock is unlocked or its lockspace is released.
To prevent those callbacks from accessing deallocated objects, put the
glocks that should not be unlocked on the sd_dead_glocks list, release
the lockspace, and only then free those glocks.
As an additional measure, ignore unexpected ast and bast callbacks if
the receiving glock is dead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add BPF_PROG_TYPE_CGROUP_SKB attach type enforcement in BPF_LINK_CREATE
bpf_prog_attach uses attach_type_to_prog_type to enforce proper
attach type for BPF_PROG_TYPE_CGROUP_SKB. link_create uses
bpf_prog_get and relies on bpf_prog_attach_check_attach_type
to properly verify prog_type <> attach_type association.
Add missing attach_type enforcement for the link_create case.
Otherwise, it's currently possible to attach cgroup_skb prog
types to other cgroup hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix overwriting ct original tuple for ICMPv6
OVS_PACKET_CMD_EXECUTE has 3 main attributes:
- OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format.
- OVS_PACKET_ATTR_PACKET - Binary packet content.
- OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet.
OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure
with the metadata like conntrack state, input port, recirculation id,
etc. Then the packet itself gets parsed to populate the rest of the
keys from the packet headers.
Whenever the packet parsing code starts parsing the ICMPv6 header, it
first zeroes out fields in the key corresponding to Neighbor Discovery
information even if it is not an ND packet.
It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares
the space between 'nd' and 'ct_orig' that holds the original tuple
conntrack metadata parsed from the OVS_PACKET_ATTR_KEY.
ND packets should not normally have conntrack state, so it's fine to
share the space, but normal ICMPv6 Echo packets or maybe other types of
ICMPv6 can have the state attached and it should not be overwritten.
The issue results in all but the last 4 bytes of the destination
address being wiped from the original conntrack tuple leading to
incorrect packet matching and potentially executing wrong actions
in case this packet recirculates within the datapath or goes back
to userspace.
ND fields should not be accessed in non-ND packets, so not clearing
them should be fine. Executing memset() only for actual ND packets to
avoid the issue.
Initializing the whole thing before parsing is needed because ND packet
may not contain all the options.
The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't
affect packets entering OVS datapath from network interfaces, because
in this case CT metadata is populated from skb after the packet is
already parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential index out of bounds in color transformation function
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: boundary check before installing cq callbacks
Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
of: module: add buffer overflow check in of_modalias()
In of_modalias(), if the buffer happens to be too small even for the 1st
snprintf() call, the len parameter will become negative and str parameter
(if not NULL initially) will point beyond the buffer's end. Add the buffer
overflow check after the 1st snprintf() call and fix such check after the
strlen() call (accounting for the terminating NUL char). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: Fix uninit-value in nci_rx_work
syzbot reported the following uninit-value access issue [1]
nci_rx_work() parses received packet from ndev->rx_q. It should be
validated header size, payload size and total packet size before
processing the packet. If an invalid packet is detected, it should be
silently discarded. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix crash on racing fsync and size-extending write into prealloc
We have been seeing crashes on duplicate keys in
btrfs_set_item_key_safe():
BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.c:2620!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs]
With the following stack trace:
#0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4)
#1 btrfs_drop_extents (fs/btrfs/file.c:411:4)
#2 log_one_extent (fs/btrfs/tree-log.c:4732:9)
#3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9)
#4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9)
#5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8)
#6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8)
#7 btrfs_sync_file (fs/btrfs/file.c:1933:8)
#8 vfs_fsync_range (fs/sync.c:188:9)
#9 vfs_fsync (fs/sync.c:202:9)
#10 do_fsync (fs/sync.c:212:9)
#11 __do_sys_fdatasync (fs/sync.c:225:9)
#12 __se_sys_fdatasync (fs/sync.c:223:1)
#13 __x64_sys_fdatasync (fs/sync.c:223:1)
#14 do_syscall_x64 (arch/x86/entry/common.c:52:14)
#15 do_syscall_64 (arch/x86/entry/common.c:83:7)
#16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121)
So we're logging a changed extent from fsync, which is splitting an
extent in the log tree. But this split part already exists in the tree,
triggering the BUG().
This is the state of the log tree at the time of the crash, dumped with
drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py)
to get more details than btrfs_print_leaf() gives us:
>>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"])
leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610
leaf 33439744 flags 0x100000000000000
fs uuid e5bd3946-400c-4223-8923-190ef1f18677
chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da
item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160
generation 7 transid 9 size 8192 nbytes 8473563889606862198
block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0
sequence 204 flags 0x10(PREALLOC)
atime 1716417703.220000000 (2024-05-22 15:41:43)
ctime 1716417704.983333333 (2024-05-22 15:41:44)
mtime 1716417704.983333333 (2024-05-22 15:41:44)
otime 17592186044416.000000000 (559444-03-08 01:40:16)
item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13
index 195 namelen 3 name: 193
item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37
location key (0 UNKNOWN.0 0) type XATTR
transid 7 data_len 1 name_len 6
name: user.a
data a
item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 303144960 nr 12288
extent data offset 0 nr 4096 ram 12288
extent compression 0 (none)
item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 4096 nr 8192
item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53
generation 9 type 2 (prealloc)
prealloc data disk byte 303144960 nr 12288
prealloc data offset 8192 nr 4096
...
So the real problem happened earlier: notice that items 4 (4k-12k) and 5
(8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and
item 5 starts at i_size.
Here is the state of
---truncated--- |
