| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: move wake reason storage into validated event handlers
hci_store_wake_reason() is called from hci_event_packet() immediately
after stripping the HCI event header but before hci_event_func()
enforces the per-event minimum payload length from hci_ev_table.
This means a short HCI event frame can reach bacpy() before any bounds
check runs.
Rather than duplicating skb parsing and per-event length checks inside
hci_store_wake_reason(), move wake-address storage into the individual
event handlers after their existing event-length validation has
succeeded. Convert hci_store_wake_reason() into a small helper that only
stores an already-validated bdaddr while the caller holds hci_dev_lock().
Use the same helper after hci_event_func() with a NULL address to
preserve the existing unexpected-wake fallback semantics when no
validated event handler records a wake address.
Annotate the helper with __must_hold(&hdev->lock) and add
lockdep_assert_held(&hdev->lock) so future call paths keep the lock
contract explicit.
Call the helper from hci_conn_request_evt(), hci_conn_complete_evt(),
hci_sync_conn_complete_evt(), le_conn_complete_evt(),
hci_le_adv_report_evt(), hci_le_ext_adv_report_evt(),
hci_le_direct_adv_report_evt(), hci_le_pa_sync_established_evt(), and
hci_le_past_received_evt(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: use RCU in ip6_output()
Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent
possible UAF.
We can remove rcu_read_lock()/rcu_read_unlock() pairs
from ip6_finish_output2(). |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: fix array-index-out-of-bounds read in add_missing_indices
stbl is s8 but it must contain offsets into slot which can go from 0 to
127.
Added a bound check for that error and return -EIO if the check fails.
Also make jfs_readdir return with error if add_missing_indices returns
with an error. |
| A flaw was found in the OpenShift Lightspeed Service, which is vulnerable to unauthenticated API request flooding. Repeated queries to non-existent endpoints inflate metrics storage and processing, consuming excessive resources. This issue can lead to monitoring system degradation, increased disk usage, and potential service unavailability. Since the issue does not require authentication, an external attacker can exhaust CPU, RAM, and disk space, impacting both application and cluster stability. |
| Allocation of resources without limits or throttling in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Dan Rossiter Document Gallery document-gallery allows Reflected XSS.This issue affects Document Gallery: from n/a through 5.1.1. |
| A NULL pointer dereference vulnerability has been reported to affect QTS, QVP, QuTS cloud and QuTS hero. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack.
We have already fixed the vulnerability in the following version:
QTS 5.2.9.3410 build 20260214 and later
QVP 2.7.4 and later
QuTS cloud c5.2.9.3468 build 20260413 and later
QuTS hero h5.2.9.3410 build 20260214 and later
QuTS hero h5.3.4.3500 build 20260520 and later
QuTS hero h6.0.0.3459 build 20260409 and later |
| CAI Content Credentials is affected by an Improper Verification of Cryptographic Signature vulnerability that could result in a Security feature bypass. An attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue does not require user interaction. |
| The Bit integrations – Form Integration, Webhook, Spreadsheets, CRM, LMS & Email Automation plugin for WordPress is vulnerable to Privilege Escalation via Log Re-execution in all versions up to, and including, 2.10.6 The vulnerability exists because `IntegrationHandler::executeWithCapture()` stores raw, attacker-controlled field values — including `user_pass` and `user_email` — verbatim into `wp_btcbi_log.field_data` on anonymous front-end requests with no capability check, and `LogHandler::reexecute()` feeds that stored payload back through `Flow::execute()` inside the replaying administrator's session without validating the identity that originally produced the data, causing `RegistrationController::updateUser()` to resolve the target user ID to the administrator and write the attacker-supplied password via `wp_update_user()`. This makes it possible for unauthenticated attackers to overwrite the administrator's password and fully take over the administrator account. Exploitation requires that an administrator has configured a flow mapping a user-supplied form field to the `user_pass` parameter of the WP User Registration "Update User" action, and that the administrator subsequently clicks "Re-execute" on the failure log row produced by the anonymous submission from the plugin's log screen. |
| The Verified Reviews (Avis Vérifiés) plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'moderation' parameter in all versions up to, and including, 2.4.6 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The authentication bypass is possible because ntav_check_data() uses loose != comparisons for signature verification, allowing a JSON body with boolean true values for idWebsite and sign to pass all checks on any configured installation. |
| A malicious actor with access to the network and under certain conditions could exploit an Improper Input Validation vulnerability found in UniFi Protect AI Key to execute a Command Injection on the device. |
| The WP Booking System WordPress plugin before 2.1.0.1 does not sanitise and escape a client-controllable request value before storing it and later outputting it in an administration screen, allowing unauthenticated attackers to perform Stored Cross-Site Scripting attacks that execute in the session of an administrator who views the stored data. |
| The Ultimate Multisite WordPress plugin before 2.17.2 does not validate a user-supplied value used to select a file to include, allowing unauthenticated attackers to include and read arbitrary local files, including the WordPress configuration file. |
| The JTL-Connector for WooCommerce plugin for WordPress is vulnerable to time-based SQL Injection via 'product.push' Identity Endpoint in all versions up to, and including, 2.4.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection fires during identity linking, before ProductController::push() executes, meaning exploitation succeeds even if downstream product handling would otherwise reject the request. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| The fix for CVE-2021-23337 added validation for the variable option in _.template but did not apply the same validation to options.imports key names, and both paths flow into the same Function() constructor sink. When an application passes untrusted input as options.imports key names, an attacker can inject default-parameter expressions that execute arbitrary code at template compilation time. Additionally, _.template uses assignInWith to merge imports, which enumerates inherited properties via for..in, so if Object.prototype has been polluted by another vector the polluted keys are copied into the imports object and passed to Function(). The issue is fixed in 4.18.1 for lodash, lodash-es, lodash-amd, and lodash.template. As a workaround, do not pass untrusted input as key names in options.imports; use only developer-controlled, static key names. |
| The Forms WordPress plugin before 3.0.2 does not sanitise submitted form values on storage, nor escape them before outputting them on the form submissions screen in the administration dashboard, allowing unauthenticated users to inject arbitrary web scripts that will execute in the browser of any administrator viewing the submissions. |
| A flaw was found in gst-plugins-base. A heap buffer overflow can be triggered when processing video buffers whose attached GstVideoMeta metadata declares plane strides and offsets that exceed the actual backing memory allocation. The metadata is not range-checked during deserialization, and the video frame mapping code does not verify that the declared plane geometry fits within the buffer before allowing consumers to read or write video data. A local attacker who controls the sending side of a GStreamer inter-process IPC pipeline can deliver a crafted buffer carrying fabricated strides, causing the receiving process to read or write beyond heap boundaries. Successful exploitation can cause a denial of service or potentially allow code execution within the affected process. |
| A flaw was found in FreeIPA's idp-add command, where insufficiently validated --organization/--base-url input reaches a constrained eval() call before the corresponding LDAP access control check is enforced. This allows any authenticated IPA principal, regardless of privilege level, to enumerate and read the environment variables of the affected server process and to cause denial of service via memory exhaustion. |
| A flaw was found in FreeIPA. A remote, unauthenticated attacker can exploit a vulnerability in the `/ipa/i18n_messages` endpoint by sending an arbitrarily large request body. This can cause the service to consume excessive memory, leading to memory exhaustion, degraded responsiveness, and a denial of service (DoS) condition. |
