| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept
We need to clear cep before release state_lock as siw_qp_llp_close and
siw_qp_modify->siw_qp_llp_close did.
Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock
is released before the error path cleanup. A concurrent ibv_modify_qp()
transitioning the QP to ERROR can race in this window:
siw_accept() ibv_modify_qp(ERROR)
---------------------- ----------------------
siw_qp_modify() fails
up_write(&qp->state_lock)
down_write(&qp->state_lock)
nextstate_from_idle():
if (qp->cep)
siw_cep_put(qp->cep) <- frees cep
qp->cep = NULL
goto error
cep->qp = NULL <- UAF
Clear qp->cep and drop the association reference taken by siw_cep_get(),
all under the write lock held from the initial down_write(&qp->state_lock).
Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free
the cep before siw_accept() is done with it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
| A use-after-free vulnerability was found in libxml2. This issue occurs when parsing XPath elements under certain circumstances when the XML schematron has the <sch:name path="..."/> schema elements. This flaw allows a malicious actor to craft a malicious XML document used as input for libxml, resulting in the program's crash using libxml or other possible undefined behaviors. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for. |
| A flaw was found in SSSD. A local user can cause a denial of service (DoS) by disrupting system authentication services. When handling Generic Security Services Application Programming Interface (GSSAPI) authentication in the Pluggable Authentication Module (PAM) responder, cached connection state is freed upon completion without clearing the reference pointer. An attacker can exploit this by sending an additional request over the same connection, causing the service to access invalid memory and unexpectedly terminate. |
| Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.
Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.
CWE: CWE-416: Use After Free
Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.
Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.
FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.
OpenSSL 4.0 is vulnerable to this issue.
OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.
The fix has been developed by Bob Beck.
-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to 7.1.2-30 and 6.9.13-55, when ImageMagick is built without Cairo support, a crafted RSVG image that reaches a resource limit can cause the RSVG decoder to free image state twice and then use freed memory, crashing the process. This issue is fixed in versions 7.1.2-30 and 6.9.13-55. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds
rxe_get_mcg() publishes a newly allocated multicast group in
rxe->mcg_tree before programming the backing Ethernet multicast address
with rxe_mcast_add(), which runs outside mcg_lock. A local userspace
RDMA client reaches this path with ATTACH_MCAST on a UD QP; if
rxe_mcast_add() then returns an error (for example -ENODEV when the
backing netdev has been removed, or a propagated dev_mc_add() error),
the unwind frees the published group without removing it from the tree.
A later lookup of the same MGID dereferences the freed struct rxe_mcg
from __rxe_lookup_mcg().
Fix this by keeping the new mcg private until rxe_mcast_add() succeeds.
Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add()
before taking the tree reference, and free the still-private mcg on
failure. Because the group is never visible in mcg_tree until the
multicast address is programmed, no concurrent caller can look it up or
attach a QP to a group that is about to be torn down, so the error path
needs no conditional unwind. If another caller publishes the same MGID
while the address is being programmed, the post-add re-check under
mcg_lock finds the winner; this caller then drops its private object and
balances its own rxe_mcast_add() with rxe_mcast_del() before returning
the winner.
Reproduced by forcing the rxe_mcast_add() error return under KASAN:
without the change the next attach to the same MGID reports a
slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure
returns cleanly. A no-injection attach/detach regression, including a
two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. |
| A flaw was found in the X.Org Server. When a window is removed during an active gesture, the server fails to clean up references to the destroyed window in its gesture tracking data. A local attacker can exploit this flaw to cause a use-after-free condition—where the system accesses memory after it has been released—potentially leading to unauthorized information disclosure or a denial of service (DoS). |
| A flaw was found in xorg-x11-server. A use-after-free vulnerability, where the application accesses memory after it has already been released, occurs in the Present extension because window notification entries are not properly unlinked before cleaning up window resources. An authenticated local X client can exploit this flaw by creating cross-window notifications and subsequently destroying the target window. Successful exploitation primarily results in a Denial of Service (DoS) via an X server crash, and may potentially lead to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan743x: fix RX checksum use-after-free
lan743x_rx_process_buffer() adds each non-first receive buffer to the
head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb()
linearizes the head and frees the fragment skb metadata.
The checksum-success path then writes ip_summed through the local skb
pointer, which still points to the final fragment. This causes a
use-after-free write when a packet spans more than one receive buffer.
Set ip_summed on the surviving head skb instead. Multi-buffer receive
can occur after a live MTU increase because existing ring entries keep
their old buffer size until they are replenished.
A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer
packet produced a one-byte KASAN use-after-free write before this change.
The same test passed after the change. The driver object also builds
with W=1. This was not tested on physical LAN743x hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: wait for deferred control PDU completions before releasing the connection
isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and
ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work
item then runs isert_completion_put() -> isert_put_cmd(), which reads
isert_conn->conn and takes conn->cmd_lock.
Nothing orders that work item against teardown. isert_wait_conn() queues
isert_release_work, which frees isert_conn, and iscsit_close_connection()
frees the iscsit_conn right after it returns, so the queued work can run
against freed memory.
Count the deferred control PDU completions per connection and let
isert_wait_conn() wait for them before the release work is queued.
ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs
iscsit_logout_post_handler(), which ends up waiting for
conn->conn_wait_comp, and that completion is only sent by
iscsit_close_connection() after it has called iscsit_wait_conn().
Waiting for it here would deadlock. Its wait stays the existing
isert_wait4logout().
The splat below is from a kernel with tracing printk()s and an msleep(200)
injected into isert_do_control_comp() to widen the window:
BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620
Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182
CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy)
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: isert_comp_wq isert_do_control_comp
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? _raw_spin_unlock_irqrestore+0x3e/0x70
? isert_put_cmd+0x53d/0x620
kasan_report+0xce/0x100
? isert_put_cmd+0x53d/0x620
isert_put_cmd+0x53d/0x620
? isert_completion_put+0x305/0x330
? isert_do_control_comp+0x2ef/0x310
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 48:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__kmalloc_cache_noprof+0x158/0x370
isert_cma_handler+0x1e3/0x2ae0
cma_cm_event_handler+0x3e/0x240
cma_ib_req_handler+0x17d9/0x4490
cm_process_work+0x41/0x330
cm_work_handler+0x5727/0xc160
process_one_work+0x633/0x1030
worker_thread+0x45b/0xd10
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30
Freed by task 184:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x121/0x380
iscsit_close_connection+0x7cf/0x1e60
iscsit_take_action_for_connection_exit+0x1b6/0x360
iscsi_target_tx_thread+0x472/0x690
kthread+0x2c6/0x3b0
ret_from_fork+0x36e/0x5a0
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
reconnect.
Signal the channel and the primary server and capture the primary
server pointer before dropping the channel reference with
cifs_put_tcp_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3
The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference"
changed the check to test for the ops pointer instead of the signaled
bit to avoid a potential NULL dereference when the ops pointer has been
cleared.
The problem is now that the ops pointer is cleared only when neither the
release nor the wait callback is implemented and this isn't true for a lot
of dma_fence implementations yet. So those implementations lost the RCU
protection after signaling of the returned string resulting in potential
use after free.
Add the signaling check additional to the ops pointer check so that we
have both the protection against NULL dereference as well as the RCU
protection after signaling for the returned string.
v2: improve comments to note RCU protection and explain why we check
both signaling state and ops pointer
v3: some comment improvements suggested by Philip |
| In the Linux kernel, the following vulnerability has been resolved:
signal: Prevent exec() race
Hyunwoo debugged the following KASAN UAF splat:
BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0
Write of size 8 at addr ffff888007ed80c8 by task poc/79
...
Call Trace:
__send_signal_locked+0xb27/0xba0
do_send_sig_info+0xa7/0x160
do_send_specific+0x76/0xa0
__x64_sys_tgkill+0x193/0x270
...
Allocated by task 80:
do_timer_create+0x1a4/0x1030
__x64_sys_timer_create+0x145/0x190
...
Freed by task 12:
kmem_cache_free_bulk+0x1f8/0x4a0
kvfree_rcu_bulk+0x14f/0x1c0
kfree_rcu_work+0x128/0x1a0
...
Last potentially related work creation:
kvfree_call_rcu+0x39/0x390
__flush_itimer_signals+0x211/0x320
flush_itimer_signals+0x47/0x90
begin_new_exec+0xa6b/0x28c0
It turned out that this happens with a non-leader exec() as Hyunwoo
explained:
de_thread() calls exchange_tids() before release_task(leader), so the
struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid
now points to the thread which called execve(). pid_task() returns that
thread and lock_task_sighand() on it succeeds.
If the timer signal is blocked, its sigqueue stays queued on the leader's
task::pending. The next expiry of that timer can then run while
release_task() flushes the queue.
posixtimer_send_sigqueue() checks whether the sigqueue is already queued
with a plain list_empty(), which only reads list_head::next.
list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next
before list_head::prev, so the check can pass in between. list_add_tail()
queues the entry on the task::pending of the live thread, and the
list_head::prev store from the flush then overwrites the list_head::prev
link that list_add_tail() has just set.
__flush_itimer_signals() does not undo that either. With list_head::prev
pointing at the entry itself, its list_del_init() only stores the same
values again, so the entry is not removed from the list. It is still there
after the last reference is dropped and the timer is freed by RCU, and the
list_add_tail() of a later tgkill() follows that list_head::prev into the
freed timer.
This problem surfaced with the recent commit which moved the sigqueue flush
out of the sighand lock held region.
Hyonwoo proposed to fix this by using list_del_init_careful(), but that
just papers over the problem. After some disucssions and various attempts
to solve it, Eric pointed out that there is no reason to flush
task::pending late in release_task() and it should be done in
exit_signals() already.
As nothing can collect and deliver signals which are queued in a dying
task's pending queue, there is no reason to delay it further.
But it has to be ensured that no signals can be queued into it after that
point. exit_signals() sets PF_EXITING in task::flags, which can be used as
an indicator for this.
Cure it by:
- Preventing signal queueing for task private signals (PIDTYPE_PID) when
the task has PF_EXITING set in __send_signal_locked() and in
posixtimer_send_sigqueue().
- Protecting the unlocked setting of PF_EXITING in exit_signals() for the
task group empty and the group exit case with sighand lock
- Flushing task::pending signals right there.
Optimize that by moving the whole pending list to an on-stack list head
under sighand lock and free the signals without the lock held.
There has been quite some discussion about the lockless flush and the
non-leader exec case on weakly ordered systems. The problem is that a third
party which tries to send a posix timer signal relies on the PID lookup to
find the target task and that lookup might result in the new leader when
the signal was originaly directed to the old leader. In case that the
signal was queued on the old leader then the lockless flush raised a
concern over the following situation:
old_leader new_leader third party
A: flush_list() // list_del_in
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: hold reference on ct until flow is released
nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe
semantics also allow to refer to the wrong conntrack from the flowtable
datapath. Hold reference on ct until flow is released after rcu grace
period.
Add rcu_barrier() on module exit path, to ensure pending flow entries
are release before module goes away. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Serialize local codec list cleanup
hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock.
Codec list additions and both traversals in sco_sock_getsockopt() use that
lock, but the close path does not. A close and BT_CODEC query can therefore
interleave as follows:
hci_dev_close_sync() sco_sock_getsockopt()
hci_dev_lock()
fetch codec entry
hci_codec_list_clear()
kfree(entry)
read entry->id
The reader then accesses an entry which the close path has freed. KASAN
BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0
Read of size 1 at addr ffff8881001c3450
Call Trace:
sco_sock_getsockopt+0xfa0/0xfe0
do_sock_getsockopt+0x537/0x7b0
__sys_getsockopt+0xf2/0x170
Allocated by task 92:
hci_codec_list_add.isra.0+0x2c/0x440
hci_read_codec_capabilities+0x224/0x590
hci_read_supported_codecs+0x2c2/0x640
Freed by task 92:
kfree+0x131/0x3c0
hci_codec_list_clear+0xd8/0x160
hci_dev_close_sync+0x92a/0xfa0
Take hdev->lock around the clear operation at its existing point in the
close path. This makes the clear wait for active readers and prevents a new
traversal until the list is empty without changing teardown ordering. |
