| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Incorrect Calculation of Buffer Size vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a configured eBGP neighbor to cause an rpd crash via BGP labeled-unicast UPDATEs when the affected multipath features are enabled. |
| An Improper Control of a Resource Through its Lifetime vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent eBGP peer to cause a routing-daemon crash via a BGP route update when RIB sharding is enabled. |
| A Mismatched Memory Management Routines vulnerability in the routing protocol daemon (rpd) process of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker to cause a denial of service via a BGP route update when extended next-hop tunneling and SRv6 service processing are used. |
| Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| An Integer Overflow or Wraparound vulnerability in the routing daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated BGP peer to cause a denial of service via BGP route updates when extended-nexthop-tunnel is enabled. |
| A Reachable Assertion vulnerability in fwstatsd of Juniper Networks Junos OS Evolved allows an authenticated network attacker to cause a denial of service via an SNMP firewall-counter MIB query when at least one firewall counter is configured. |
| A Reachable Assertion vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an attacker with access to a configured BGP-LS peer to cause an rpd crash via a crafted BGP-LS Link NLRI advertisements. |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent network attacker to cause a denial of service via a crafted RSVP packet when MPLS-TE RSVP processing is enabled. The condition can terminate rpd and disrupt routing protocol sessions. |
| Use of uninitialized resource in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| A Reachable Assertion vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated network-based attacker to cause a denial of service via BGP-LS routing updates. |
| An Improper Validation of Specified Quantity in Input vulnerability in the rpd process of Juniper Networks Junos OS and Junos Evolved allows an unauthenticated adjacent attacker to cause a denial-of-service condition via a malformed RIPv2 message. |
| A NULL Pointer Dereference vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated adjacent attacker to cause a denial-of-service condition via a malformed PIM Bidir message. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information locally. |
| The STM32WBA IEEE 802.15.4 driver in drivers/ieee802154/ieee802154_stm32wba.c computed the packet length of a received frame as pkt_len = rx_frame->length - IEEE802154_FCS_LENGTH without first checking that the radio-reported length could hold an FCS. pkt_len is a uint8_t, so a reported length of 0 or 1 wrapped to 254 or 255. The only bound on the resulting value was __ASSERT_NO_MSG(pkt_len <= CONFIG_NET_BUF_DATA_SIZE), which compiles to nothing in the default production configuration (CONFIG_ASSERT=n).
The length originates in the ST link-layer receive-done metadata (p_metadata->length, stored by stm32wba_802154_receive_done()), and ultimately in the PHY header of a frame received over the air, so it is influenced by any attacker within radio range of the device. Reaching the underflow requires the vendor link layer to surface a frame shorter than the FCS with no error; the driver performed no validation of its own on that value.
When the underflow occurs, stm32wba_802154_rx_thread() calls net_pkt_write(pkt, rx_frame->psdu, pkt_len) with a length of about 254 bytes against a receive buffer that holds at most one PHY packet (IEEE802154_MAX_PHY_PACKET_SIZE, 127 bytes). This reads roughly 128 bytes past the end of the radio receive buffer and copies that adjacent memory into a network packet that is submitted to the networking stack, giving an out-of-bounds read with a potential disclosure of adjacent RAM plus needless oversized packet allocation in the RX thread.
The fix rejects a frame whose reported length is smaller than IEEE802154_FCS_LENGTH before the subtraction, and replaces the compiled-out assertion with a runtime length check that drops oversized frames — matching the runtime check already present in drivers/ieee802154/ieee802154_nrf5.c. |
| The CC1200 sub-GHz IEEE 802.15.4 driver takes the PHY packet length from the first byte of the radio's RX FIFO in get_packet_length() and validates it in verify_rxfifo_validity() (drivers/ieee802154/ieee802154_cc1200.c). That validation only enforced a lower bound (pkt_len < 3); its second clause rejects a FIFO that holds more bytes than declared and therefore never bounds large values. Because the driver configures the radio for variable packet length with PKT_LEN = 0xFF, the length byte is an over-the-air value of 0-255 that reached net_pkt_rx_alloc_with_buffer() and the subsequent SPI burst read unclamped.
An unauthenticated attacker within radio range can transmit a frame that presents a length byte above the IEEE 802.15.4 maximum of 127 while the chip's 128-byte RX FIFO has not overflowed, so the driver's RX_FIFO_ERROR pre-check does not fire. Reaching this state depends on RF framing and timing, since the RX thread is driven off the PKT_SYNC_RXTX signal and may sample the FIFO before a packet is complete; no pairing, authentication, or user interaction is required.
With the default CONFIG_NET_BUF_FIXED_DATA_SIZE and CONFIG_NET_BUF_DATA_SIZE=128, an allocation larger than one fragment is satisfied by a chain of fragments, but read_rxfifo_content() performs a single SPI burst of pkt_len bytes into the first fragment's buf->data and then calls net_buf_add() with the same length. A length above 128 therefore writes up to 127 bytes past the end of a fragment in the contiguous rx_bufs pool and leaves a net_buf whose len exceeds its capacity. The overflowing bytes are FIFO-underflow output rather than attacker-chosen data, so the practical impact is network-buffer-pool corruption and crashes rather than a controlled write. Only builds that enable CONFIG_IEEE802154_CC1200 with an attached CC1200 radio are affected. |
| ethernet_recv() in subsys/net/l2/ethernet/ethernet.c validates only that the first net_buf of a received frame holds a plain 14-byte struct net_eth_hdr. When the ethertype is 0x8100 and VLAN is enabled on the interface, the same buffer is reinterpreted as the 18-byte struct net_eth_vlan_hdr without re-checking the length: the VLAN TCI and the inner ethertype are read from offsets 14..17, past pkt->buffer->len, and hdr_len is raised to 18 so the subsequent net_buf_pull() removes more bytes than the buffer holds.
A single unauthenticated frame of 14 to 17 bytes carrying the VLAN ethertype triggers this. No knowledge of the node's VLAN configuration is needed: net_eth_get_vlan_iface() returns the base interface for the priority tag 0, and a broadcast destination address satisfies the "frame is for me" test, so a 16-byte broadcast frame with ethertype 0x8100 and TCI 0x0000 reaches the pull. Nothing in the receive path enforces the 60-byte Ethernet minimum — the USB CDC ECM and CDC NCM gadget classes in particular hand host-supplied frames of any non-zero length straight to net_recv_data().
With assertions enabled, net_buf_simple_pull() asserts and the node panics. In a production build (assertions and CONFIG_NET_BUF_HARDENING off) the uint16_t buffer length underflows to 65534 and buf->data is advanced past the end of the fragment's storage, so every later parser reads far outside the buffer and any net_buf_add() on that fragment computes tailroom from the underflowed length. The result is a reliable remote denial of service and out-of-bounds access with information-disclosure and corruption potential.
Only configurations built with CONFIG_NET_VLAN=y that have a VLAN enabled on the receiving Ethernet interface, and whose MAC does not strip VLAN tags in hardware (ETHERNET_HW_VLAN_TAG_STRIP), are affected. The fix rejects the frame before the tag is read, so hdr_len is thereafter either 14 or 18 with both sizes validated against pkt->buffer->len. |
| The receive path of the NXP KW41Z IEEE 802.15.4 driver, kw41z_rx() in drivers/ieee802154/ieee802154_kw41z.c, computed the payload size as pkt_len = len - KW41Z_FCS_LENGTH in a uint8_t, where len is the frame length reported by the radio. The interrupt handler kw41z_isr() obtained that length from the RX_FRAME_LENGTH field of the ZLL IRQSTS register — a copy of the PHY header length byte of the frame received over the air — and only rejected the value zero. A reported length of one therefore underflowed to pkt_len == 255.
Because the packet is allocated with NET_AF_UNSPEC on a non-Ethernet L2, net_pkt_rx_alloc_with_buffer() does not clamp the request to the interface MTU; with the default fixed-size buffer pool (CONFIG_NET_BUF_FIXED_DATA_SIZE, CONFIG_NET_BUF_DATA_SIZE=128) the allocation succeeded as a chain of two fragments. The subsequent register-to-buffer copy loops write into the first fragment only, so 255 bytes were written into a 128-byte net_buf data block, overrunning it by up to 127 bytes into adjacent network-buffer-pool memory, and reading up to 128 bytes past the end of the radio's PKT_BUFFER_RX register array.
The length field originates from an unauthenticated frame transmitted by any device within 802.15.4 radio range, and is captured by the hardware at PHY-header time — before frame filtering has completed — while the handler samples it after clearing the interrupt status, so an attacker flooding frames with a length byte of one can drive the underflow. The impact is memory corruption in the shared receive buffer pool from interrupt context, most plausibly a crash or corruption of other packets' data; the overflowing bytes are radio register contents rather than attacker-authored data, which bounds the integrity impact.
The fix rejects any length below KW41Z_FCS_LENGTH and additionally verifies net_buf_tailroom() of the first fragment before the copy loops, which also covers the CONFIG_NET_L2_OPENTHREAD variant of the size computation. |
| An Out-of-bounds Write vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated attacker to cause a routing-plane denial of service via Auto-RP mapping announcements received when Auto-RP mapping is enabled. |
| Lantronix XPress-DR and XPress-DR-I (CoBos-family) firmware through 8.1.0.0 contains a missing authentication vulnerability that allows remote attackers to read and persistently overwrite device configuration by sending crafted frames to the unauthenticated UDP configuration protocol on port 30718. Attackers can send a type 0xF8 query to read live configuration data and a type 0xFD frame with exactly 0x78 body bytes to rewrite the device IP address and serial-channel forwarding records, causing changes to commit to EEPROM and persist across reboots. The XPress-DR product series reached end-of-life/end-of-support in February 2025. |
| An Improper Validation of Specified Quantity in Input vulnerability in the rpd process of Juniper Networks Junos OS and Junos OS Evolved allows a configured BGP MVPN peer to cause a denial of service via a BGP MVPN signaling update. |
