| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In google_mba_recv_msg of google_mba_poll.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In Start of AudioRtpPayloadEncoderNode.cpp, there is a possible out-of-bounds write due to improper input validation. This could lead to remote code execution with no additional execution privileges needed. User interaction is needed for exploitation. |
| In multiple locations, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In phNxpNciHal_ext_process_nfc_init_rsp of phNxpNciHal_ext.cc, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In trusty_dputc of generic-arm64-smcall.c, there is a possible out-of-bounds write due to a race condition. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In link_load_gnss_image of link_device.c, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 2.0.0 until 2.16.1 and 3.0.12, automatic response decompression on the HTTP/1.1 path uses ChannelManager.newHttpContentDecompressor() to install Http1ContentDecompressor without a cumulative output-size limit. A hostile or compromised server, or an attacker who can alter a response in transit, can send a small gzip, deflate, or snappy response that expands across chunks until the client exhausts its heap and raises OutOfMemoryError; brotli and zstd are also affected when their optional codecs are present. In versions 3.0.8 through 3.0.10, the HTTP/2 decompressor is also unbounded, so switching protocols does not mitigate the issue on those releases. A limit applied to each decode call is insufficient because the response can be delivered as many small chunks, so the fixed implementation tracks total decompressed bytes for the whole response. This issue is fixed in versions 2.16.1 and 3.0.12. |
| The ping diagnostics and other similar functions of the MitraStar GPT-2741GNAC-N2-SV router with firmware BR_g8.10_1.11(WVK.0)b46 allow authenticated users execute arbitrary OS command via concatenated params on a crafted POST request for the endpoint /cgi-bin/device-management-utilities-internet.cgi. |
| FatPipe MPVPN, WARP, and IPVPN appliances running the end-of-life firmware version 10.1.2r60p100 contain an OS command injection vulnerability in the xtremed daemon. An unauthenticated remote attacker with access to the affected management interface can submit crafted input to the AuthFormServlet endpoint, causing authentication data to be processed by a shell and allowing arbitrary commands to execute as root.
The affected management interface is disabled by default and must be affirmatively enabled by the customer before the endpoint becomes reachable. FatPipe recommends restricting management access to trusted administrative networks and using WAN access control lists to limit access to trusted sources.
Customers running the affected end-of-life firmware can contact FatPipe Support for help confirming their firmware version and upgrading to a current supported release at https://www.fatpipeinc.com/support/support, support@fatpipeinc.com, or +1 800-724-8521 (option 3). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full
The depth check in xfrm6_input_addr() is off by one:
if (1 + sp->len == XFRM_MAX_DEPTH)
goto drop;
...
sp->xvec[sp->len++] = x;
xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode
receive path re-enters IPv6 input via xfrm_trans_reinject() with that
secpath preserved. If the inner packet carries a destination-options HAO
option or a type-2 routing header, xfrm6_input_addr() is called with
sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so
sp->xvec[sp->len++] writes one slot past the 6-element xvec[]. The write
stays within the sec_path allocation (invisible to KASAN); UBSAN_BOUNDS
flags it and panics under panic_on_warn.
Use "sp->len >= XFRM_MAX_DEPTH", matching xfrm_input(). This also
restores one chain level the old check rejected at sp->len == 5.
UBSAN: array-index-out-of-bounds in net/ipv6/xfrm6_input.c:309:10
index 6 is out of range for type 'xfrm_state *[6]' |
| Cute Editor for ASP.NET 6.4 is vulnerable to reflected cross-site scripting caused by improper validation of the Theme GET parameter in colorpicker_more.aspx. A remote, unauthenticated attacker can craft a URL that, once opened by a victim in a browser session authenticated to a site running the vulnerable component, executes arbitrary JavaScript in the security context of that site. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_codel: clamp default quantum and mtu
fq_codel_init() sets q->quantum = psched_mtu(qdisc_dev(sch)) without
clamping. A device with a huge MTU (e.g. dummy with max_mtu == 0
accepting MTU 2147483634) makes psched_mtu() return 0x80000000, which
overflows the signed flow->deficit to INT_MIN in fq_codel_dequeue(),
causing an infinite loop and soft lockup. Emulate fq_codel_change()
and constrain to [256, FQ_CODEL_QUANTUM_MAX].
The same unclamped psched_mtu() is assigned to q->cparams.mtu a bit
below, and fq_codel_change() never updates it. codel_should_drop()
tests "*backlog <= params->mtu"; with mtu == 0x80000000 (~2 GiB) and
the default 32 MiB memory_limit, the test is always true, so CoDel is
silently and completely disabled (no drops, no ECN). Declare a single
clamped mtu and assign both q->quantum and q->cparams.mtu from it,
which also removes the double psched_mtu() call.
Conditions to recreate the bug: a device whose MTU (plus
hard_header_len) wraps psched_mtu() into the sign bit (e.g. a dummy
device with max_mtu == 0 accepting MTU 2147483634). Requires
CAP_NET_ADMIN in a user namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_skbmod: fix length calculations and avoid invalid header warnings
syzbot reported a warning in skb_network_header_len() triggered
by tcf_skbmod_act():
!skb_transport_header_was_set(skb)
WARNING: CPU: 0 PID: 14949 at include/linux/skbuff.h:3243 skb_network_header_len include/linux/skbuff.h:3243 [inline]
WARNING: CPU: 0 PID: 14949 at net/sched/act_skbmod.c:55 tcf_skbmod_act+0xfe8/0x1810 net/sched/act_skbmod.c:55
There are a few issues in tcf_skbmod_act():
1. Calling skb_network_header_len() assumes skb->transport_header is set,
which is not guaranteed when tcf_skbmod_act() runs at TC ingress.
2. Unconditionally calling skb_mac_header_len() at the beginning of
tcf_skbmod_act() triggers a warning on L3 devices (e.g. TUN) where the
MAC header is unset, evaluating to an underflowed garbage length.
3. On TC ingress, skb->data points to the network header. Adding the MAC
header length to the IP header length causes skb_ensure_writable() to
request more bytes than the actual IP packet length, dropping valid
short packets (e.g. 28-byte UDP/IPv4 packets).
Fix these by:
- Using skb_network_offset(skb) + sizeof(struct iphdr/ipv6hdr) for
SKBMOD_F_ECN so that the required length is correctly calculated on
both ingress (offset == 0) and egress (offset == mac_len).
- Setting max_edit_len to ETH_HLEN for Ethernet header modifications
after validating ARPHRD_ETHER. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: fix sleep in atomic context in MAC table access
sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates
dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() /
sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These
take sparx5->lock, a mutex, and then poll the MAC access command
register with readx_poll_timeout(). A mutex may block, which is not
allowed from atomic context.
Convert the driver to the new .ndo_set_rx_mode_async callback introduced
in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and
netdev_rx_mode_work"). The async callback is invoked from process
context, so the mutex and sleeping completion poll can remain.
Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK,
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip
preempt_count: 201, expected: 0
Call trace:
__might_resched+0x144/0x248
__might_sleep+0x48/0x7c
__mutex_lock+0x74/0x850
mutex_lock_nested+0x24/0x30
sparx5_mact_learn+0x78/0x100
sparx5_mc_sync+0x40/0x54
__hw_addr_sync_dev+0xc4/0x170
sparx5_set_rx_mode+0x4c/0x58
__dev_set_rx_mode+0x64/0xa4
__dev_open+0x1ec/0x26c |
| adm-zip is a JavaScript library for creating and extracting ZIP archives in Node.js. Prior to 0.6.1, getData() in zipEntry.js trusts an entry's central-directory uncompressed size and allocates output memory before validating that value against the actual compressed data and decompression result. A small crafted ZIP can declare a multi-gigabyte uncompressed size, causing Buffer.alloc and decompression handling to commit excessive resident memory before CRC validation reports an error. Applications that read entries from untrusted archives can therefore be terminated by the operating system or suffer service-wide memory exhaustion. This issue is fixed in version 0.6.1. |
| The AsyncHttpClient (AHC) library allows Java applications to easily execute HTTP requests and asynchronously process HTTP responses. From 3.0.8 until 3.0.12, a client with maxConnections or maxConnectionsPerHost set above zero leaks one connection permit whenever TLS connection establishment fails before the handshake completes. NettyConnectListener removes the partitionKeyLock permit from NettyResponseFuture before every failure path is bound to the channel closeFuture, so an abort can leave the permit unreleased. Repeated failures can permanently lock out one host under a per-host limit or drain the shared pool under a global limit, blocking later requests even when no connection remains open. The default unlimited connection setting is not affected. This issue is fixed in version 3.0.12. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/mlx5: fix wrong list iterated in add_direct_chain error path
In add_direct_chain(), newly allocated direct MR entries are added to
the local list 'tmp', which is spliced into mr->head only on success.
On the error path, the cleanup loop was incorrectly iterating over
mr->head instead of tmp.
Fix by iterating over 'tmp' in the err_alloc cleanup path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: fix LAYOUTSTATS send buffer exhaustion
encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE),
i.e. 256 bytes, for the layoutupdate4 body written by the layout driver.
The flexfiles record can exceed that.
ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4,
an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server
whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of
those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4
and the bool add a further 144, so the body passes 256 bytes before the
netaddr4 is encoded at all. encode_layoutstats() additionally writes
the deviceid4 and the layoutupdate4 lou_type word, neither of which the
macro accounts for.
The filehandle and the address are both chosen by the server, through
LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the
end of the send buffer. xdr_reserve_space() returns NULL once that
happens, and the two ff_layout_encode_io_latency() calls run with
dss_info->mirror->lock held, so a NULL return there leaves the lock
permanently held.
Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the
reservation. |
| The WP2Social Auto Publish plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 2.4.12 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
