Export limit exceeded: 414425 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93141 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89602 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: skip sufficiently large global buffers when resizing z_erofs_gbuf_nrpages is advanced only after every global buffer has been grown. If a resize fails after some buffers were enlarged, a retry revisits those enlarged buffers. Retrying the same size then returns -ENOMEM because alloc_pages_bulk() has no pages to add and the unchanged return value is treated as a failure. Retrying an intermediate size allocates a temporary pointer array smaller than gbuf->nrpages and copies more existing pointers than the array can hold. Skip buffers that already satisfy the request. Once all remaining buffers have caught up, advancing z_erofs_gbuf_nrpages again describes the guaranteed minimum size across the pool. | ||||
| CVE-2026-80945 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: crypto: iaa - unmap dst before software fallback on decompress On a hardware analytics error, decompress retries through the software fallback, which writes req->dst with the CPU while it is still mapped DMA_FROM_DEVICE. With SWIOTLB active the later dma_unmap_sg() copies the stale bounce buffer over req->dst, corrupting the result. Unmap before the fallback runs. The async path unmaps inline; the sync path signals the retry with -EAGAIN so iaa_comp_adecompress() runs the fallback after unmapping. | ||||
| CVE-2023-20193 | 1 Cisco | 1 Identity Services Engine | 2026-09-21 | 6 Medium |
| A vulnerability in the Embedded Service Router (ESR) of Cisco ISE could allow an authenticated, local attacker to read, write, or delete arbitrary files on the underlying operating system and escalate their privileges to root. To exploit this vulnerability, an attacker must have valid Administrator-level privileges on the affected device. This vulnerability is due to improper privilege management in the ESR console. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to elevate their privileges to root and read, write, or delete arbitrary files from the underlying operating system of the affected device. Note: The ESR is not enabled by default and must be licensed. To verify the status of the ESR in the Admin GUI, choose Administration > Settings > Protocols > IPSec. | ||||
| CVE-2026-20350 | 1 Cisco | 1 Thousandeyes Enterprise Agent | 2026-09-21 | 4.7 Medium |
| A vulnerability in the web-based management interface of Cisco ThousandEyes Virtual Appliance could allow an authenticated, remote attacker to inject arbitrary operating system commands. This vulnerability is due to improper validation of user-supplied input to the web-based management interface. An attacker could exploit this vulnerability by saving configuration details that contain malicious values. A successful exploit could allow the attacker to execute arbitrary operating system commands with root privileges. To exploit this vulnerability, the attacker must have valid administrative credentials. | ||||
| CVE-2026-94277 | 1 Misp | 1 Misp | 2026-09-21 | N/A |
| MISP's galaxy matrix statistics view (app/View/Users/statistics_galaxymatrix.ctp) renders the galaxy name directly into HTML output via sprintf() without any HTML encoding. An authenticated user holding the perm_galaxy_editor permission can create or modify a galaxy whose name contains arbitrary HTML or JavaScript markup. Because the value is interpolated verbatim into the page, any user who subsequently opens the galaxy matrix statistics page will have the embedded script executed in their browser context. This enables session hijacking, credential theft, data exfiltration, or the performance of arbitrary actions on behalf of the victim within the MISP application. Version affected: <2.5.47 | ||||
| CVE-2025-39682 | 3 Debian, Linux, Siemens | 4 Debian Linux, Linux Kernel, Simatic Cn 4100 and 1 more | 2026-09-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | ||||
| CVE-2026-94096 | 1 Netcore | 1 Nbr200v2 | 2026-09-21 | 9.9 Critical |
| A vulnerability was found in Netcore NBR200V2 1.3.241127.071246. Affected by this issue is some unknown functionality of the file /usr/bin/network_tools of the component LAN IP Configuration Handler. The manipulation of the argument ipv4 results in command injection. The attack may be launched remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-68598 | 2 Livecomposer, Wordpress | 2 Page Builder: Live Composer, Wordpress | 2026-09-21 | 6.5 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Live Composer Team Page Builder: Live Composer live-composer-page-builder allows Stored XSS.This issue affects Page Builder: Live Composer: from n/a through 2.1.22. | ||||
| CVE-2024-35768 | 1 Blueastral | 1 Page Builder\ | 2026-09-21 | 5.9 Medium |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Live Composer Team Page Builder: Live Composer live-composer-page-builder allows DOM-Based XSS.This issue affects Page Builder: Live Composer: from n/a through 2.1.22. | ||||
| CVE-2026-81627 | 2 Qemu, Redhat | 8 Qemu, Enterprise Linux, Enterprise Linux For Nvidia 26 and 5 more | 2026-09-21 | 8.2 High |
| A flaw was found in QEMU. The VAPIC setup hypercall in hw/i386/vapic.c does not validate that the writable RAM alias remains within the option ROM window. A privileged guest user on a Q35/KVM machine can position this alias over locked SMRAM, bypassing chipset D_LCK protection and injecting code into System Management Mode memory. | ||||
| CVE-2026-63406 | 1 Anycable | 1 Anycable | 2026-09-21 | 5.9 Medium |
| AnyCable is a realtime server for reliable two-way communication that supports any backend. Prior to 1.6.15, the telemetry subsystem in telemetry/config.go enables tracking with a hardcoded public authToken, while clusterFingerprint in telemetry/telemetry.go reads the full configuration file and raw os.Args returned by anycableCLIArgs, including values supplied through --secret, --jwt_secret, and --http_rpc_secret. These inputs are passed to generateDigest, where sha256.New produces the hexadecimal fingerprint that is sent as telemetry. The available source therefore does not show raw credentials leaving the process or establish the advisory's claimed confidentiality loss, although the stable fingerprint is derived from secret-bearing configuration and the default telemetry client uses publicly known authentication material. This issue is fixed in version 1.6.15. | ||||
| CVE-2026-64847 | 1 Agronholm | 1 Anyio | 2026-09-21 | 5.5 Medium |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. Prior to 4.14.2, AnyIO starts process-pool workers with standard error connected to a pipe that the parent never drains, even though the documented behavior redirects all three standard streams. Worker code that writes enough attacker-influenced data to sys.stderr can fill the pipe and block before returning the standard-output protocol response, causing the awaiting process-pool call to remain blocked indefinitely. Applications that run untrusted or faulty worker code capable of producing substantial standard-error output are affected. This issue is fixed in version 4.14.2. | ||||
| CVE-2026-84992 | 1 Imzbf | 1 Md-editor-v3 | 2026-09-21 | 6.1 Medium |
| md-editor-v3 is a Markdown editor for Vue 3 developed in JSX and TypeScript. Prior to 6.5.4, MdPreview's useMarkdownIt() highlight callback in packages/MdEditor/layouts/Content/composition/useMarkdownIt.ts inserts a fenced-code language value into class and language HTML attributes without escaping or consistently quoting it. Both highlighted and non-highlighted rendering paths reach this return value, while XSSPlugin filters only existing html_block and html_inline tokens before rendering and therefore cannot inspect the renderer-generated HTML. An attacker who can supply Markdown can use crafted fenced-code metadata to execute JavaScript in the application origin when a victim renders it, including as stored cross-site scripting when the host persists the Markdown. This issue is fixed in version 6.5.4 | ||||
| CVE-2026-2422 | 2 Ghozylab, Wordpress | 2 Wp Composer – The Easiest Page Builder, Wordpress | 2026-09-21 | 6.4 Medium |
| The WP Composer – The Easiest Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pbwp_raw_shortcode' shortcode in all versions up to, and including, 1.0.5. This is due to the shortcode handler decoding Base64-encoded content and outputting it directly without any sanitization or escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The Base64 encoding allows the payload to bypass WordPress's KSES content filtering at save time, since the encoded string contains no harmful HTML characters. | ||||
| CVE-2026-8354 | 2 Celomitan, Wordpress | 2 Gum Addon For Elementor, Wordpress | 2026-09-21 | 6.4 Medium |
| The Gum Addon for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'pop_tag' parameter in all versions up to, and including, 1.3.15 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-31153 | 1 Bynder | 1 Bynder | 2026-09-21 | 5.4 Medium |
| A stored cross-site scripting (XSS) vulnerability in Bynder before 12 January 2026 allows attackers to execute arbitrary web scripts or HTML via a crafted payload. | ||||
| CVE-2026-53266 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). | ||||
| CVE-2026-71645 | 1 Robotics-star-lab | 1 Racer | 2026-09-21 | 7.5 High |
| An issue in Robotics-STAR-Lab (SYSU STAR Group) RACER Tested affected version: commit abcdef1234567890 allows an attacker to cause a denial of service via the exploration state machine | ||||
| CVE-2022-35497 | 1 Trimble | 1 Tm4web | 2026-09-21 | 5.4 Medium |
| In Trimble TM4WEB 21.4.0.4 due to security misconfiguration with session identifiers, it is possible to recover valid session cookies via reflected cross-site scripting affecting the external document viewer endpoint. | ||||
| CVE-2026-71801 | 2026-09-21 | 9.8 Critical | ||
| An issue was discovered in s-pms SPMS-Server through v1.0. The application contains a hardcoded default access token secret within its core configuration file, which is not overridden or removed in the production environment profile. A remote, unauthenticated attacker can locally forge valid administrative session tokens to completely bypass the authentication mechanism gaining full unauthorized access to protected backend APIs. | ||||