Export limit exceeded: 25803 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25710 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90103 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the reservation. | ||||
| CVE-2026-90127 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock held. The virtio RTC alarm requests currently wait without a timeout for the device to return their requestq buffers. On surprise removal, virtio-pci marks the virtqueues broken before unregistering the virtio device. If an alarm request is waiting when the device stops responding, viortc_remove() blocks in viortc_class_stop() while trying to acquire ops_lock. The request cannot complete and device removal hangs until the waiting task is signalled. Use the same 60-second timeout as clock read requests for alarm reads, alarm programming, and alarm interrupt enable requests. The existing message reference counting keeps a timed-out request alive until a late response or device teardown. | ||||
| CVE-2026-90140 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release() | fuse_dev_release() | fuse_conn_put(fch->conn) | call_rcu(delayed_release) ------+---> callback queued | rmmod cuse | cuse_exit() | cuse_channel_destroy() | ... | return | | <module text freed> | | rcu_do_batch() | delayed_release() | fc->release() | -> cuse_fc_release() | ^^^ freed text! The freed module text is unmapped by vfree(), so the jump into the stale callback triggers a page-fault Oops. If the virtual address is subsequently reused, the callback could execute unrelated code (undefined behaviour). Fix this by calling rcu_barrier() in cuse_exit() so that any pending fuse_conn release callback completes before the module is removed. | ||||
| CVE-2026-90143 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program. | ||||
| CVE-2026-90185 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute stores with the lock The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes (submit_queues, poll_queues) get dev->NAME written again after apply_fn returns, outside its lock; APPLY=NULL attributes are entirely lockless. configfs only serializes stores per-open-file, so concurrent stores on separate fds race. For apply_fn attributes, once one store's apply_fn has reconfigured the hardware, a second (losing) store can still overwrite dev->NAME afterwards. This leaves dev->submit_queues out of sync with the live queue count, which is later caught by the WARN_ON_ONCE() in null_map_queues(). For !apply_fn attributes, power_store()'s null_add_dev() validates and builds the device under "lock" but only sets CONFIGURED afterwards. A store slipping in during this window can change a field mid-setup -- for example, zone_nr_conv can be pushed above nr_zones after it has already been clamped, leading to an out-of-bounds dev->zones[] access. Take "lock" in the macro around the apply_fn call, the CONFIGURED test and the field write, and move it out of nullb_apply_submit_queues()/ nullb_apply_poll_queues() so both paths are covered once. This serializes stores with power_store's setup and with each other. | ||||
| CVE-2026-90309 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Hold CQ references when processing EQ events EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or error callbacks outside the xarray lock. erdma_destroy_cq() can erase the CQ from the xarray and free its queue buffer and doorbell record while a previously scheduled EQ handler is still using the CQ. Add a CQ refcount and take a reference under the xarray lock with refcount_inc_not_zero(). Remove the CQ from the xarray before dropping the destroy-path reference, then wait for in-flight EQ users before releasing CQ resources. | ||||
| CVE-2026-90110 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can selectively force the eviction of targeted inet_peer nodes. When an evicted node is subsequently re-created upon receiving a new packet, its rate-limiting token bucket (rate_tokens, rate_last) is reset to full capacity. This creates a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP rate limits and infer open UDP ports (similar to SAD DNS style attacks). Mitigate this by randomizing the RB-tree node comparison logic using SipHash with a secret key (inetpeer_hash_key) initialized via net_get_random_once(). Nodes are ordered in the tree by SipHash(addr, key) rather than raw IP addresses. Because the secret key is unknown to external entities, the tree layout and lookup traversal paths are unpredictable to off-path adversaries, breaking the deterministic eviction gadget. Cache the computed 64-bit SipHash (hash) in struct inet_peer and compute the target hash (dhash) once at the beginning of inet_getpeer() to avoid recomputing SipHash at every step of the RB-tree walk. | ||||
| CVE-2026-90114 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending and single-entry ranges remain unchanged, while malformed descending ranges consistently return -EINVAL. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-90120 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value. | ||||
| CVE-2026-90124 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=0 353=0 328=0 352=0 Fix this by writing back only the bit being cleared, with all other bits set to 1, instead of read-modify-writing the whole register. Since 1-bits are left unchanged by hardware, concurrently-set status bits for other interrupts are preserved. | ||||
| CVE-2026-90147 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate() devm_clk_get_optional_enabled_with_rate() registers its cleanup action before setting the clock rate. If setting the rate fails, it attempts to disable and unprepare a clock that was never enabled. This issue was spotted while reviewing "rust: clk: add devres-managed clks" [1]. Register the cleanup action only after successfully preparing and enabling the clock. [1]: https://lore.kernel.org/rust-for-linux/20260706-clk-type-state-v5-3-67c5f326a16c@collabora.com | ||||
| CVE-2026-90159 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow bpf_{g,s}etsockopt() in cgroup UNIX getname hooks _bpf_setsockopt() and _bpf_getsockopt() call sock_owned_by_me() for full sockets, so these helpers expect the socket lock to be held. BPF_CGROUP_UNIX_GETPEERNAME and BPF_CGROUP_UNIX_GETSOCKNAME run BPF programs without acquiring the socket lock. A program attached to either hook can therefore trigger the sock_owned_by_me() warning by calling bpf_setsockopt() or bpf_getsockopt(). Disallow bpf_setsockopt() and bpf_getsockopt() for CGROUP_UNIX_GETPEERNAME and CGROUP_UNIX_GETSOCKNAME. | ||||
| CVE-2026-90169 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: free preauth sessions on connection teardown SMB3.1.1 multichannel binding preserves the preauthentication hash in a preauth_session between the NTLM negotiate and authenticate requests. The binding NTLM negotiate allocates this object and returns STATUS_MORE_PROCESSING_REQUIRED. If the client disconnects before it sends the authenticate request, neither the authenticate nor error cleanup paths free the object. Release any remaining preauthentication sessions when tearing down the connection. Initialize the list when allocating the connection so that this cleanup is safe regardless of the negotiated dialect. | ||||
| CVE-2026-90379 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: Add PCIe AER handler support to prevent system crash When an AER error occurs and the bus is hung, the register reads return 0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in an invalid memory access when accessing q->desc[] or q->entry[]. Unable to handle kernel paging request at virtual address ffffffc01099eac0 pc : mt76_dma_add_buf+0x124/0x188 [mt76] lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76] sp : ffffffc016d9bbf0 x29: ffffffc016d9bc10 x28: 0000000000000000 x27: 0000000000000000 x26: ffffffb7855e50b8 x25: ffffffb80d04f000 x24: 0000000000000000 x23: 0000000000000ec0 x22: ffffffb796803648 x21: ffffffb796801f80 x20: ffffffb7968035f8 x19: 0000000000000ec0 x18: 0000000000000000 x17: 000000004ec00000 x16: 000000000ec00000 x15: ffffffc01099eac0 x14: 000000004ec00000 x13: 00000000ffc5a000 x12: ffffffc016d9bc32 x11: 00000000ffffffff x10: 0000000000000002 x9 : 0000000000000000 x8 : 000000000000b4ac x7 : 0000000000000a20 x6 : ffffffb6c1806400 x5 : 0000000000000000 x4 : ffffffb80d04f000 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 000000000ec04000 x0 : ffffffb7968035f8 Call trace: mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)] mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)] mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)] mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)] mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)] process_one_work+0x188/0x514 worker_thread+0x12c/0x300 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Fix the invalid memory access by validating the DMA index read from the hardware before it is used as a queue index. An out-of-range value, such as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can no longer corrupt q->head or q->tail. In addition, check the bus_hung flag in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU messages while the bus is hung, and install no-op bus operations when an unrecoverable AER error is detected, preventing further invalid hardware accesses. Due to hardware limitations - such as the lack of a connected hardware reset pin or the absence of host re-probe functionality - affected Wi-Fi devices may not fully recover to a normal operational state after certain errors, even with AER enabled. | ||||
| CVE-2026-93177 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc, vddci and vddmem lookup tables without bounds checks across nine sites. Return -EINVAL when any index is out of range. | ||||
| CVE-2026-90175 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: server: fix leak of ksmbd_ipc_login_request_ext() returned buffer Free it unconditionally after ksmbd_alloc_user() calls. kmemleak splat: unreferenced object 0xffff888103b83540 (size 192): comm "pool-0", pid 16970, jiffies 4377290937 hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 408ccc66): __kvmalloc_node_noprof+0x730/0x920 handle_generic_event+0xec/0x1a0 [ksmbd] genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x181/0x290 netlink_rcv_skb+0x4f/0x100 genl_rcv+0x28/0x40 netlink_unicast+0x1e6/0x2c0 netlink_sendmsg+0x20a/0x450 ____sys_sendmsg+0x2e8/0x310 ___sys_sendmsg+0x78/0xc0 __sys_sendmsg+0x63/0xc0 do_syscall_64+0xa1/0x670 entry_SYSCALL_64_after_hwframe+0x76/0x7e | ||||
| CVE-2026-90181 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ublk: avoid teardown retry loop on xarray allocation failure __ublk_shmem_remove_ranges() removes matching maple tree ranges in batches, but first stores each range into a temporary xarray so that the pages can be unpinned after dropping the maple tree lock. That temporary xarray is filled under the maple tree lock with xa_store(..., GFP_ATOMIC). If the store fails before mas_erase(), the current range is left in the tree and the helper returns false. The outer ublk_shmem_remove_ranges() loop then immediately retries the same range. While the atomic allocation keeps failing, the teardown path has no forward progress. The issue can be reproduced with radix_tree_node failslab injection after a SHMEM_ZC buffer has already been registered: # Kernel config: # CONFIG_BLK_DEV_UBLK=y # CONFIG_DEBUG_FS=y # CONFIG_FAULT_INJECTION=y # CONFIG_FAULT_INJECTION_DEBUG_FS=y # CONFIG_FAILSLAB=y echo 10 > /proc/sys/vm/nr_hugepages mkdir -p /tmp/htlb mount -t hugetlbfs none /tmp/htlb fallocate -l 4M /tmp/htlb/ublk_buf dev_id=$(kublk add -t null --shmem_zc \ --htlb /tmp/htlb/ublk_buf | awk -F '[ :]' '/dev id/ {print $3}') echo 1 > /sys/kernel/slab/radix_tree_node/failslab echo Y > /sys/kernel/debug/failslab/cache-filter echo Y > /sys/kernel/debug/failslab/ignore-gfp-wait echo 1 > /sys/kernel/debug/failslab/interval echo -1 > /sys/kernel/debug/failslab/times echo 100 > /sys/kernel/debug/failslab/probability kublk del -n "$dev_id" On the unfixed kernel the delete command was still running after 3 seconds. Disabling failslab made it return. The fault-injection stack showed: should_failslab kmem_cache_alloc_lru_noprof __xas_nomem __xa_store xa_store __ublk_shmem_remove_ranges ublk_cdev_rel ublk_ctrl_del_dev Remove the allocation from the teardown loop. Keep the existing batch limit, but collect {base_pfn, nr_pages} pairs in a fixed-size stack array. Once a matching range is found, the range is erased from the maple tree before dropping the lock, so each successful scan makes progress without depending on any GFP_ATOMIC allocation. With the same failslab settings, the fixed kernel completed "kublk del -n $dev_id" successfully in about 45 ms. | ||||
| CVE-2026-90215 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: ubi: Release device reference on busy detach ubi_detach_mtd_dev() obtains a device reference through ubi_get_device() before checking whether the UBI device is busy. The busy return path drops ubi->ref_count but leaves the device reference held, so the device object cannot be released after a later detach. Drop the device reference before returning -EBUSY. | ||||
| CVE-2026-90223 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length pair derived from skb->len, without bounding reads to the actual skb data. Three problems followed: - For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed. - The per-TLV header (type, length) was read without checking that two bytes remained. - A declared TLV length could run past the end of the buffer, and an SDREQ with length == 0 made "service_name_len = length - 1" underflow (size_t), driving an out-of-bounds read in the following strncmp() / nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3] without a length check. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Walk the TLV list by pointer, bounded by skb_tail_pointer() over the linear skb data, and validate each TLV declared length before use. Add explicit length checks for SDREQ (>= 1) and SDRES (exactly 2). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-90227 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a partition device or write through a read-only file descriptor. Pass flags and open_for_write through and reject disallowed commands with -EACCES. | ||||