Export limit exceeded: 412903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25710 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90094 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64: process: Fix context switching MTE store-only tag check SCTLR_EL1.TCSO0 is set when user opt-in for MTE store-only tag check mode. However, it is not part of SCTLR_USER_MASK which imply that on context switch we never clear SCTLR_EL1.TCSO0, so we are leaking that setting into another task. Fix that by including SCTLR_EL1_TCSO0_MASK into SCTLR_USER_MASK | ||||
| CVE-2026-90100 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp: netc: fix period truncation and potential divide-by-zero in PEROUT The max_period bound in net_timer_enable_perout() was computed as: max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period; which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for the default 333333333 Hz clock). A period_ns that passes this check but exceeds U32_MAX is then silently truncated when stored into the u32 struct netc_pp::period field. A truncated value of zero can reach netc_timer_set_perout_alarm(), where the local u32 period variable would also be 0, causing a divide-by-zero in roundup_u64(delta, period) whenever the stime < min_time branch is taken (which always happens for a start time of {0, 0}). Additionally, netc_timer_enable_periodic_pulse() and netc_timer_enable_fiper() both compute: fiper = pp->period - integral_period; A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD, mis-programming the FIPER hardware register. Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER (0xFFFFFFFF). This ensures that any period_ns passing the range check fits in a u32 without truncation, so the stored value is always valid and non-zero. The accepted range is reduced by integral_period ns (typically only a few nanoseconds), which is negligible in practice. | ||||
| CVE-2026-90102 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: key the data server cache on the NFS version nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath address set alone, and struct nfs4_pnfs_ds records no version. That suffices for the files layout driver, which always connects with version 4, but flexfiles takes its version tuple from GETDEVICEINFO per device, and one address can legitimately serve both NFSv3 and NFSv4. Two deviceids on one address with different ds_versions[0].version therefore share a single nfs4_pnfs_ds, and whichever mirror connects first pins ds_clp to its own version. The other one is handed that client anyway, so it selects rpc_call_ops for a version the connection does not speak, and the mismatched sequence-slot handling dereferences NULL. Add the version to the cache key so the two cannot alias, giving each version its own nfs4_pnfs_ds and connection while both mirrors stay usable. Only the major version is compared, since that is what selects rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files layout driver passes the 4 it already hardcodes at connect time. | ||||
| CVE-2026-90108 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition When smc_llc_event_handler() transitions the local LLC flow from SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK request, it calls smc_llc_flow_qentry_set() unconditionally: if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) { lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK; smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); ... } A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer without first freeing the stashed allocation, leaking one kmalloc object. The stashed entry has no consumer: smc_llc_wait() is only called from llc_add_link_work, which is not yet scheduled while the flow type remains REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point. It is safe to unconditionally free any stashed qentry before the overwrite. Call smc_llc_flow_qentry_del() before smc_llc_flow_qentry_set() in the REQ_ADD_LINK branch. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal path where no entry is stashed is a no-op. | ||||
| CVE-2026-90128 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path. | ||||
| CVE-2026-90139 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ================================================================== BUG: KASAN: null-ptr-deref in fuse_get_tree_submount+0x656/0x8b0 Read of size 8 at addr 00000000000002b0 by task ls/942 CPU: 0 PID: 942 Comm: ls Tainted: G W 6.6 #15 Call Trace: <TASK> fuse_get_tree_submount+0x656/0x8b0 vfs_get_tree+0x48/0x140 fc_mount+0x13/0x50 fuse_dentry_automount+0x7a/0xb0 __traverse_mounts+0xca/0x330 step_into+0x339/0xac0 path_lookupat+0xc5/0x2f0 filename_lookup+0x163/0x2a0 vfs_statx+0xd5/0x200 do_statx+0x83/0xd0 __x64_sys_statx+0xa0/0xc0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x78/0xe2 </TASK> ================================================================== Return -ENOMEM instead; the caller tears down the partially built superblock on error, matching the other error returns in this function. | ||||
| CVE-2026-93147 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Replace ly instruction with llgf cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does. | ||||
| CVE-2026-90118 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end. | ||||
| CVE-2026-90122 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-90126 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own). | ||||
| CVE-2026-90145 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed Previously, hinic3_send_one_skb() cached the skb fragment count before calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to skb_checksum_help() for unsupported tunnel packets, the skb may be linearized. Continuing to build the TX descriptor with the stale fragment count leads to a descriptor mismatch, which can trigger out-of-bounds DMA reads or IOMMU faults. Furthermore, the old code ignored the return value of skb_checksum_help(), transmitting corrupted packets with incomplete checksums upon failure. Fix this by: 1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to ensure the correct fragment count is used if the SKB is linearized. 2. Propagating skb_checksum_help() errors and returning HINIC3_TX_OFFLOAD_INVALID to properly drop the skb. | ||||
| CVE-2026-90201 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race This bug was discovered while testing the hns3 driver under channel reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on arm64. The race is intermittently triggered when page_pool_destroy() runs page_pool_scrub() concurrently with page return via page_pool_put_netmem() on a different CPU. A WARN in page_pool_clear_pp_info() surfaced the dangling DMA index bits left by the cmpxchg loser, which led to the investigation. page_pool_scrub() iterates pool->dma_mapped via xa_for_each() with no page ref held. __page_pool_release_netmem_dma() currently reads and writes netmem fields (dma_addr, DMA index bits in pp_magic) after xa_cmpxchg() returns. The unref path calls put_page() unconditionally regardless of the cmpxchg outcome; when it loses the cmpxchg, it still frees the page before the scrub winner finishes these netmem accesses, so scrub touches a freed page -- a Use-After-Free. Fix this by splitting the DMA release into two functions: 1. __page_pool_unmap_netmem_dma() caches dma_addr before xa_cmpxchg(), does the cmpxchg to remove the DMA mapping, and calls dma_unmap on the cached address. It never touches netmem fields after the cmpxchg, making it safe for the scrub path which holds no page ref. 2. __page_pool_release_netmem_dma() wraps the above and additionally clears dma_addr and DMA index bits in netmem fields. This is safe only when the caller holds a page ref, so it is used by the return path (page_pool_return_netmem). The scrub path calls __page_pool_unmap_netmem_dma() directly; the return path calls __page_pool_release_netmem_dma(). | ||||
| CVE-2026-90210 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure When bpf_trampoline_update() fails before modify_fentry_multi()/ unregister_fentry_multi() is called, cur_image is unchanged (cur_image == old_image) and ftrace still calls into it. Freeing old_image in that case causes a UAF. Only free old_image when it differs from cur_image. | ||||
| CVE-2026-90085 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix NULL deref in NIX TM tree debugfs read path rvu_dbg_nix_tm_tree_display() dereferences pfvf->sq_ctx without checking whether the SQ context has been allocated. Reading /sys/kernel/debug/octeontx2/nix/tm_tree for a NIX LF whose transmit queues are not set up triggers a kernel oops. Guard the read path the same way rvu_dbg_nix_tm_tree_write() already does and return -EINVAL with a seq_file message when sq_ctx is NULL. | ||||
| CVE-2026-90088 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is zero, consistent with the initial value assigned in rfcomm_dlc_alloc(). | ||||
| CVE-2026-90089 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data. Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early. Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated. | ||||
| CVE-2026-90090 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: Fix out-of-bounds DMA read in the TX path btmtksdio_tx_packet() rounds the transfer size up to the SDIO block size of 256 bytes, but hands the host controller the SKB buffer as is: err = sdio_writesb(bdev->func, MTK_REG_CTDR, skb->data, round_up(skb->len, MTK_SDIO_BLOCK_SIZE)); Only skb->len bytes hold packet data, so the controller reads up to 255 bytes of uninitialised memory and sends it to the device over the SDIO bus. Depending on how much tailroom slack the SKB allocation happens to carry, that read can also extend past the end of the buffer. Compute the padded length up front, ensure the SKB has tailroom for it, and zero-fill the padding with skb_put_zero(). skb->len then covers the padding, so sdio_writesb() no longer needs to round up. byte_tx keeps counting the header and the payload only, and the error path restores the SKB so that the caller can requeue it. Writing behind skb->tail is only safe because the driver owns the buffer, which "Bluetooth: btmtksdio: Take exclusive ownership of the SKB before TX" ensures. | ||||
| CVE-2026-90312 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check load-acquire src ptr type before the load check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok(). For a load-acquire that fetches into its own source register (dst_reg == src_reg), check_load_mem() overwrites src_reg's type with the type of the loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the source pointer and fails to reject the disallowed types (ctx, pkt, flow_keys, sock). Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw access to the underlying kernel object is left in place. The destination type is taken from the ctx access itself, so a load-acquire of the sk field of struct __sk_buff for example leaves the register typed as PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match either, while it actually holds unconverted struct sk_buff bytes. Once the NULL check has passed this is a type confusion, not just a leak of kernel data. Validate src_reg with check_reg_arg() and check the source pointer type with atomic_ptr_type_ok() before the load again, mirroring check_atomic_rmw(). Out-of-range register numbers are already rejected earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do register range validation early")), and the only exemption there, is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not dereference register state out of bounds, that is, the out-of-bounds read addressed by the Fixes commit below does not reappear (as proven also via selftest). | ||||
| CVE-2026-93165 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length. | ||||
| CVE-2026-93189 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: quiesce input in hid_hw_stop() to prevent use-after-free A driver's probe calls hid_device_io_start() to enable input delivery, then fails at a later initialization step and unwinds via hid_hw_stop(). The unwind frees struct hidraw via hidraw_disconnect() while in-flight HID reports may still be running on another CPU, dereferencing the freed object through hidraw_report_event(). syzbot reports the resulting use-after-free for the corsair-psu HID driver. Edward Adam Davis posted a per-driver fix for corsair-psu that adds an explicit hid_device_io_stop() before hid_hw_stop() in the probe error path ("hwmon: prevent packets from going to driver for probe", 2026-04-28). Auditing the tree shows 15 drivers call hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not: drivers calling hid_device_io_start() without a matching hid_device_io_stop() before hid_hw_stop(): drivers/hwmon/corsair-psu.c (fix posted by Edward) drivers/hwmon/corsair-cpro.c drivers/hwmon/nzxt-kraken3.c drivers/hwmon/nzxt-smart2.c drivers/hwmon/gigabyte_waterforce.c drivers/hid/hid-logitech-dj.c drivers/hid/hid-nintendo.c drivers/hid/hid-mcp2221.c Roughly half of all callers of the API are exposed. Centralize the quiesce in hid_hw_stop() so callers do not have to remember the matching stop: if a driver has left hdev->io_started true on entry, call hid_device_io_stop() before hid_disconnect(). For the 7 drivers that already call hid_device_io_stop() correctly, hdev->io_started is false on entry, the guard short-circuits, and behavior is unchanged. No Fixes: tag because the affected drivers gained their hid_device_io_start() calls independently over years; the bug is a class-wide API misuse rather than a regression from one commit. | ||||