| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: skip device-private PMDs in madvise_free_huge_pmd
madvise_free_pte_range() checks pmd_trans_huge(*pmd) unlocked, then
madvise_free_huge_pmd() takes pmd_trans_huge_lock(). pmd_is_huge()
returns true for a device-private PMD, so orig_pmd can be device-private
and enter the !pmd_present() branch.
Skip device-private PMDs in that non-present branch and continue to out
before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so
an unexpected PMD softleaf logs a warning rather than panicking. Drop the
thp_migration_supported() guard: it expands to
IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both
pmd_is_migration_entry() and pmd_is_device_private_entry() already return
false when that config is not selected, so the guard suppresses only the
case where the warning would already be silent.
Potential trigger: an HMM-based GPU driver races with madvise(MADV_FREE):
migrate_vma_pages() flips the PMD to a device-private entry between the
caller's pmd_trans_huge() check and the callee's pmd_trans_huge_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn
With CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled, deferred_grow_zone()
initializes struct pages early in boot to satisfy an allocation.
With a large CMA reservation in place, the ranges deferred_init_memmap()
finds may not add up to the allocation it was asked for, and the function
ends up initializing the memory map of the entire zone and still falls
short.
That is fine in itself: the function accounts for it and leaves the
caller to decide whether it now has enough memory.
However, the update of pgdat->first_deferred_pfn that tracks where
uninitialized memory map starts could overflow.
If the node's RAM end is not aligned on PAGES_PER_SECTION boundaries and
some deferred struct pages were initialized, pgdat->first_deferred_pfn
would point past the end of the node's memory.
deferred_init_memmap() later picks up from pgdat->first_deferred_pfn and
hits a BUG_ON(), because it expects a pfn within its node.
For example, when running a kernel with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
and CONFIG_CMA=y using the following qemu command line
qemu-system-x86_64 -enable-kvm -m 8032M -kernel bzImage \
-append "nokaslr cma=4768M@0x100000000"
the kernel panics:
kernel BUG at mm/mm_init.c:2131!
CPU: 3 UID: 0 PID: 36 Comm: pgdatinit0 Not tainted 7.2.0-rc6 #1
RIP: 0010:deferred_init_memmap+0x1b8/0x1c0
RAX: 0000000000236000 R13: 0000000000238000
Call Trace:
kthread+0xdf/0x120
ret_from_fork+0x187/0x250
Make sure that the update of pgdta->first_deferred_pfn does not overflow
when the entire zone's (and therefore node's) memory map is initialized.
[rppt: massaged the changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry
The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit()
is missing a read memory barrier (smp_rmb) before its second counter
check. The standard kernel read_seqcount_retry() includes smp_rmb()
to ensure that all data reads complete before the counter is re-checked.
Without this barrier, on weakly-ordered architectures (ARM, POWER),
the CPU may reorder field reads past the second counter check, making
the retry logic ineffective: it could observe a consistent counter pair
while reading fields that have been concurrently modified by the writer.
Add smp_rmb() before the second counter check to order the field reads
ahead of it, matching the barrier semantics of the standard seqcount
read-side. The begin-side smp_load_acquire() already pairs with the
smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering
the field reads, the retry check no longer needs acquire semantics and
reads the counter with a plain READ_ONCE(), as read_seqcount_retry()
does.
[ cel: Use READ_ONCE instead of smp_load_acquire() ] |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: validate FDP configuration descriptor sizes
Validate descriptor sizes while walking the FDP configurations log so
dsze == 0 or a descriptor past the log end cannot cause unbounded
iteration or reads past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Bound SW TPA IDs to prevent crashes
FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range
0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for
57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a
software ID which is used to index rxr->rx_tpa, and to generate a mapping
between FW IDs and the wrapped software ID.
On a 57608 with firmware version 233, the firmware advertises 32
concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC
is set to 32.
If the software ID from bnxt_alloc_agg_idx is above 31, this results in
an invalid address being loaded on this line:
tpa_info = &rxr->rx_tpa[agg_id];
because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes
to tpa_info later in the code are out of bounds.
This bug results in a crash at boot:
Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI
RIP: 0010:bnxt_rx_pkt+0xc0/0x1560
RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516
RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0
RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048
R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516
R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680
FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? __netif_receive_skb_list_core+0x1ca/0x250
__bnxt_poll_work+0x152/0x280
bnxt_poll_p5+0x1cd/0x480
__napi_poll+0x30/0x180
net_rx_action+0x20b/0x3b0
? note_gp_changes+0x53/0xe0
? tick_setup_sched_timer+0x180/0x180
? __napi_schedule+0x9a/0xb0
? bnxt_msix+0x24/0x30
handle_softirqs+0xdd/0x2c0
__irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0
common_interrupt+0x85/0x90
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
This stack trace is from a crash triggered when an out of bounds rx_tpa
is dereferenced. The invalid write mentioned above is silent in this
particular crash.
Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next
power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID
with that size, so the wrapped ID can never index past the end of the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Support CPU hotplug for PMU PAI
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()] |
| Adobe Campaign Classic (ACC) is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary SQL commands. Exploitation of this issue does not require user interaction. Scope is changed. |
| Adobe Campaign Classic (ACC) is affected by an Improper Control of Generation of Code ('Code Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Don't dereference trace_event_file in deferred trigger free
The enable_event trigger defers trace_event_put_ref() to the
trigger free kthread, but the trace_event_file can already be freed
when the instance is removed.
Keep the trace_event_call directly in enable_trigger_data so the
deferred free does not access the freed trace_event_file. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate packet_len before skb_put_data
btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without
checking if it exceeds the RX buffer size. An oversized packet_len
can lead to an out-of-bounds read in skb_put_data().
Validate packet_len to ensure it is non-zero and does not exceed
BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when
invalid.
This issue was reported by Claude Mythos. It can be simulated either by
using customized firmware configured to return an invalid packet_len or
by modifying rfh_hdr->packet_len in the driver before calling
btintel_pcie_submit_rx_work(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_set_level()
Commit a2cec6863709 ("s390/debug: Add s390dbf kernel parameter")
incorrectly removed a null-id check from debug_set_level(), introducing
a possible NULL pointer dereference for debug-API users that put
debug_register() results unchecked into debug_set_level().
Fix this by moving the check from the internal _debug_set_level()
variant back to the external debug_set_level() wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix unit conversions in per_binval computation
LOLLM noticed that we're doing the unit conversion in the per_binval
computation backwards -- xfs_buf_inval_log_space's second parameter is
supposed to be in bytes, but max_binval is in units of fsblocks. Hence
the conversion should be FSB -> B, not the other way around. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't return -EINVAL for successful nested thaw
Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices")
replaced the freeze_holders bitmask with per-holder counters to allow
nested freezes. In the bitmask version, a thaw that released a shared
hold while another holder remained returned 0. Since the rework,
thaw_super_locked() drops the freeze reference via freeze_dec() but
then returns -EINVAL when other freezers remain, misinforming the
caller: the thaw did succeed, the superblock just stays frozen for the
remaining holders.
This breaks bdev-initiated freezing. When a filesystem is frozen with
FIFREEZE and additionally frozen via bdev_freeze() -- which nests by
design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives
-EINVAL from the holder op although its freeze reference was dropped,
and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's
unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances
the count. After the user's FITHAW and umount, the block device can
never be mounted again:
dm-1: Can't mount, blockdev is frozen
There is no way for userspace to drop the leaked count; only
destroying the block device (or a reboot) recovers the device.
Reproducer (any kernel since v6.8):
dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0"
mkfs.ext4 /dev/mapper/dut
mount /dev/mapper/dut /mnt
fsfreeze --freeze /mnt # freeze_ucount == 1
dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2
dmsetup resume dut # ucount 2 -> 1, but thaw_super()
# returns -EINVAL, so bdev_thaw()
# keeps bd_fsfreeze_count at 1
fsfreeze --unfreeze /mnt # filesystem thaws fine
umount /mnt
mount /dev/mapper/dut /mnt # EBUSY, forever
The same happens with fsfreeze held across an LVM snapshot of the
origin volume.
fs_bdev_thaw()'s documentation already describes the intended
semantics: "If this function returns zero it doesn't mean that the
filesystem is unfrozen as it may have been frozen multiple times".
Restore them by returning 0 when a nested thaw drops its hold while
other freezers remain. Thawing without holding a freeze still fails
with -EINVAL as may_unfreeze() rejects that case before the reference
count is touched. |
| In the Linux kernel, the following vulnerability has been resolved:
net: net_failover: Fix the deadlock in net_failover_slave_name_change()
This is a sibling fix of commit
b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register").
There is netdev_lock_ops() in the upper callers, so using netif_open()
instead of dev_open().
Call Trace:
__schedule+0x2bb/0x650
schedule+0x27/0xb0
schedule_preempt_disabled+0x15/0x30
__mutex_lock.constprop.0+0x550/0xaf0
__mutex_lock_slowpath+0x13/0x20
mutex_lock+0x3b/0x50
dev_open+0x3b/0xe0
net_failover_slave_name_change+0x22/0x40
failover_event+0xd4/0x1e0
notifier_call_chain+0x62/0xf0
raw_notifier_call_chain+0x16/0x30
call_netdevice_notifiers_info+0x50/0x80
netif_change_name+0x200/0x330
do_setlink.isra.0+0xb12/0xdf0
? security_capable+0x9a/0x1e0
? ns_capable+0x31/0x60
rtnl_setlink+0x302/0x670
? netlink_recvmsg+0x296/0x340
? security_capable+0x9a/0x1e0
? __pfx_rtnl_setlink+0x10/0x10
rtnetlink_rcv_msg+0x384/0x460
? __pfx_rtnetlink_rcv_msg+0x10/0x10
netlink_rcv_skb+0x61/0x120
rtnetlink_rcv+0x15/0x30
netlink_unicast+0x28f/0x3c0
netlink_sendmsg+0x216/0x450
__sys_sendto+0x222/0x230
__x64_sys_sendto+0x24/0x40
x64_sys_call+0x1d5d/0x2390
do_syscall_64+0x105/0x5a0
? do_syscall_64+0x140/0x5a0
? exc_page_fault+0x94/0x1e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Fix NULL dereference in iova_to_phys() with ZPCI_TABLE_TYPE_RFX
When using a 5-level translation table via ZPCI_TABLE_TYPE_RFX
get_rso_from_iova() returns NULL when the region-first entry is invalid.
Yet in get_rto_from_iova() the region-second origin rso is not checked
to be non-NULL before accessing rso[rsx] leading to a NULL pointer
dereference instead of a NULL return when iova_to_phys() is called on
a unmapped IOVA. Fix this by adding the missing NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_brcm: legacy FCS: request needed tailroom
The legacy FCS tagger calculates the CRC over skb->len bytes starting at
skb->data. When a nonlinear skb reaches the tagger, this reads past the
linear head into unrelated slab memory.
The tagger appends an Ethernet FCS but does not declare that tailroom. As a
result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user
port, and nonlinear skbs can reach the CRC calculation.
Declare the required tailroom. DSA will then clear those features and the
networking core will linearize skbs before the tagger runs.
A KASAN-enabled dsa_loop test using this tagger reports:
BUG: KASAN: slab-out-of-bounds in crc32_le
Read of size 1 at addr ffff8880397086c0 by task exp/135
Call Trace:
crc32_le (lib/crc/crc32-main.c:38)
brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343)
dsa_user_xmit (net/dsa/user.c:942)
dev_hard_start_xmit (net/core/dev.c:3937)
__dev_queue_xmit (net/core/dev.c:4926)
packet_sendmsg (net/packet/af_packet.c:3110)
__sys_sendto (net/socket.c:2281)
The buggy address belongs to the object at ffff888039708400
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ffff888039708400, ffff8880397086c0) |
