| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields when recycling rhtab elements
rhtab_map_update_existing() and rhtab_delete_elem() call
bpf_obj_free_fields() when replacing or deleting a value. These map
operations can run from BPF programs in NMI context, where releasing a
referenced kptr or another complex field is not generally safe.
Array and hash maps avoid that problem by cancelling only the asynchronous
fields which can be stopped safely in the caller context. Other ownership
state remains attached to the allocation until its memory allocator
destructor performs the final cleanup.
Use bpf_obj_cancel_fields() for the corresponding rhtab paths as well. This
cancels timers, workqueues, and task work while allowing rhtab_mem_dtor() to
release referenced kptrs when the allocation is eventually destroyed.
[ kkd: Rebased, used direct helper calls, and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
struct amdxdna_cmd_chain contains a flexible array annotated with
__counted_by(command_count). Since the structure is stored in shared
AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently.
If command_count is changed to zero, the bounds check generated from
__counted_by may fail and trigger a kernel panic.
Remove __counted_by to avoid relying on the userspace-controlled
command_count for the flexible array bounds check. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: drop the replaced rule from the list when reprogramming fails
nfp_net_fs_add() replaces an existing rule by deleting it from the
hardware, decrementing nn->fs.count and programming the new one. If
nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the
success path reaches list_replace() - so the list is one longer than
nn->fs.count, and it advertises a rule whose hardware entry has already
been torn down.
nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes
its buffer one entry short of what the GRXCLSRLALL walk wants to write.
That used to overwrite one u32 past the allocation; since the walk is
bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the
counter. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve special fields in recycled rhtab elements
rhtab_map_update_elem() initializes special fields after obtaining an
element from bpf_mem_cache_alloc(). The allocator can return a fresh,
zeroed unit, or recycle one from its RCU-pending lists before the
registered destructor has run.
A BPF program can retain a map-value pointer after deleting its element
and initialize and arm a timer through that pointer. If the deleted unit
is recycled, check_and_init_map_value() clears the only pointer to the
timer. Neither a later deletion nor rhtab_mem_dtor() can then cancel it,
and the callback can run with its key and value pointing into freed memory.
Do not reinitialize special fields on insertion. Fresh allocator units are
already zeroed. For recycled units, the special fields are ownership state
that must remain visible to the eventual destructor. copy_map_value()
already skips those fields, matching the non-preallocated hash-map path and
the lifecycle established by commit 275c30bcee66 ("bpf: Don't reinit map
value in prealloc_lru_pop").
[ kkd: Split out the fix and rewrote the commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject tail calls directly from callback frames
A tail call from a non-zero frame is modeled as a return from that frame.
The verifier makes R0 unknown and calls prepare_func_exit() for the taken
branch.
When the current frame is a synchronous callback, prepare_func_exit()
enforces the callback return-value contract and marks R0 precise. Since the
tail-call path synthesized R0 rather than deriving it from an instruction,
precision backtracking reaches the callback-calling instruction with R0
still requested and triggers the "callback unexpected regs" verifier bug.
A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD.
Tail calls reachable from callbacks are already rejected later by
check_max_stack_depth(). Reject a tail call made directly by a callback
before constructing the inconsistent return state, using the existing
diagnostic. Tail calls from ordinary subprograms keep their current
behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: propagate reparse index insertion failure
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Don't read the U65 rounding mode as a storage mode
Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage
mode on U85 only. On U65 the same field holds the rounding mode, and the
command stream parser has read it as a storage mode since the driver was
added.
That went unnoticed while unknown values fell through the switch, but
now that they are rejected, every U65 command stream that asks for
natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits
it for average pooling, concatenation, split, unpack, strided slice, LUT
and argmax, which is 72 failures of the Teflon test suite on an i.MX93.
Truncating rounding (1) is misread as well: it picks the two-tile
address path and computes a bogus feature map size from tile bases the
command stream never set.
Read the field as a storage mode only on the hardware where it is one. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(), the new
offset is computed into dst_reg's var_off and 32/64-bit ranges.
2. Because pointer registers do not track 32-bit subregister bounds,
__mark_reg32_unbounded() first sets r32 to the full range; r32 is
re-derived from the offset at the end of the function by
reg_bounds_sync().
3. On the unprivileged path, sanitize_ptr_alu() is called and, via
sanitize_speculative_path() -> push_stack(), snapshots the current
register state and schedules the next instruction (insn 15) to be
verified directly as a speculative path.
4. That snapshot is taken between step 2 and the final reg_bounds_sync():
at this point dst_reg's var_off still holds the (const) original
offset while r32 has just been blanked to the full range, i.e. the two
are out of sync. When the speculative path later verifies insn 15
(r9 = r0), the inconsistent state reaches reg_bounds_sanity_check() and
trips the warning.
var_off and the 32-bit range must always be consistent. There are two
ways to keep the snapshot consistent:
1. sync var_off and r32 before the snapshot so they match, or
2. leave r32 at its original (already consistent) value and blank it
only after the snapshot.
The whole point of sanitize_ptr_alu() is to insert a harmless masking
sequence that keeps the access in bounds under speculation, so the state
it snapshots should faithfully represent that. Take approach 2: move
__mark_reg32_unbounded() to after sanitize_ptr_alu(), so the speculative
snapshot keeps the pointer's original, consistent r32. The non-speculative
path is unchanged: r32 is still blanked before the offset is applied and
re-derived by reg_bounds_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject a command chain that carries no commands
A chain whose command_count is zero passes the payload length check,
because struct_size(payload, data, 0) is just the header. The fill loop
then does not run, so offset stays zero and the request is submitted with
a zero-length buffer.
On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since
op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers
MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers
MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission
continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte
before the buffer and faults on the vmap guard page. EXEC_CMD is
reachable by any process that can open the render node.
Reject the request instead. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix potential UAF/KASAN warning
Currently, trace_cachefiles_coherency() is being passed a pointer to a
__be64 lain over the coherency data in struct cachefiles_xattr so that it
can display the first 8 bytes. However, the data is of variable length and
could even be 0 bytes. This could lead to a UAF or KASAN warning.
Fix this by making sure the buffer has room for at least 8 bytes and that
those 8 bytes are pre-cleared.
Further, those bytes are not 8-byte aligned, so fix the tracepoint to
extract the data as four 2-byte words (they are 2-byte aligned) and
reassemble the __be64. The compiler will convert this into a single 8-byte
load where the CPU supports it. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
padapter->HalData is allocated via vzalloc(), but incorrectly freed
using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to
release this vmalloc-backed buffer can lead to memory corruption.
Use rtw_hal_data_deinit() to pair the free correctly and free
HalData with vfree().
The bug was first flagged by an experimental static analysis tool we
are developing for kernel memory-management bugs. Manual inspection
confirms that the issue is still present in current mainline.
An x86_64 allyesconfig build showed no new warnings. As we do not have
suitable RTL8723BS SDIO hardware to test with, no runtime testing was
able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: nfp: bound the ntuple rule dump by the caller's buffer size
nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[]
without consulting cmd->rule_cnt, which is how many entries the caller
had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the
ioctl sizes the buffer from the rule_cnt userspace passes in, so once an
admin has installed flow steering rules any user can ask for fewer slots
than there are rules and run off the end of the allocation. A rule_cnt
of 0 leaves the buffer pointer NULL and the walk dereferences it.
Bail out with -EMSGSIZE when the buffer fills up, the way the other
ntuple capable drivers do, and report how many locations were filled so
a shrinking rule list does not leave the caller reading stale slots. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject untrusted allocated-object pointers
When the final RCU read-side critical section ends, a local kptr is demoted
to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer
to an object whose lifetime is no longer protected.
type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with
MEM_ALLOC as a live allocated object. In particular, a refcount-only local
kptr never carries NON_OWN_REF, so it still passes the
bpf_refcount_acquire() argument check after RCU protection ends. The kfunc
can then dereference NULL or stale memory.
Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since
type_is_non_owning_ref() is based on the same predicate, graph kfunc
arguments obey the same live-object requirement. Fault-protected reads of
the demoted pointer remain valid: writes are already rejected, and read
fixups use bpf_may_fault_on_deref() rather than this predicate.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Require MEM_PERCPU for percpu kptr stores
map_kptr_match_type() treats perm_flags as the set of register type flags
that a kptr field permits. Adding MEM_PERCPU to that set for
BPF_KPTR_PERCPU does not require the source register to carry it, however.
The subset test consequently accepts both a plain bpf_obj_new() allocation
and a referenced kernel pointer into a __percpu_kptr map field.
Loads from the field are always marked MEM_PERCPU. Consumers then treat the
stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer
helpers relocate it, and map teardown selects the per-CPU free path. A plain
allocation can therefore provide an arbitrary kernel read/write, while a
kernel pointer can be relocated into an invalid address or sent through a
missing destructor.
Require the source MEM_PERCPU flag to match the destination field kind.
This preserves valid bpf_percpu_obj_new() stores and rejects both the
program-BTF and kernel-BTF variants. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark the zero register precise for a register-form NULL check
check_cond_jmp_op() accepts "if rA <op> rB" as a NULL check for a
nullable pointer rA when rB is a scalar known to be zero,
lifts PTR_MAYBE_NULL from rA in the corresponding branch and does not
mark rB precise. Consider the following program:
r0 = bpf_get_prandom_u32();
r6 = 1; /* the r6 == 0 path is explored first */
if (r0 == 0) goto 1f;
r6 = 0;
1:
r0 = bpf_map_lookup_elem(map, &0); /* absent, NULL at runtime */
if (r0 == r6) goto 2f; /* taken as a NULL check for r0 */
*(u8 *)(r0 + 0); /* verifier: map value; runtime: zero */
2:
return 0;
The r6 == 0 path is explored first and the dereference is accepted.
The r6 == 1 path is pruned at the checkpoint recorded for (1),
so the comparison is never verified with a non-zero r6. At runtime a
failed lookup returns NULL, NULL != 1 takes the non-NULL edge and the
program dereferences a pointer that is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Don't resurrect a scalar id dropped by collect_linked_regs()
check_cond_jmp_op() copies the compared registers into
env->{false,true}_reg{1,2} before collect_linked_regs() runs and copies
those snapshots back into both branch states afterwards.
collect_linked_regs() records at most LINKED_REGS_MAX members of a
linked registers group in the jump history and calls clear_scalar_id()
for every member that does not fit. The compared register is not exempt
from that.
As a consequence, sync_linked_regs() might adjust ranges for more
registers than bpf_bt_sync_linked_regs() can propagate precision to.
Collect the linked registers before the snapshots are taken instead.
This might lead to some unnecessary clear_scalar_id's, but from
previous testing situations with many linked registers are
extremely rare. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/pagemap: Prevent double migration of device pages
A device-private folio migrated to system memory by a CPU fault can
remain reachable through the raw-PFN eviction path until migration
finalization drops the source reference.
If eviction selects the same device-private folio during this window,
it can attempt to migrate the folio again. The second migration can leave
an uncharged folio on an LRU list, causing folio_lruvec_lock_irqsave() to
retry indefinitely and resulting in a soft lockup and RCU stall.
Mark successfully migrated device-private folios using a low bit of
their zone_device_data before migration finalization. Make both CPU-fault
and raw-PFN migration paths skip device-private folios carrying this
flag.
Mask the flag when retrieving the drm_pagemap_zdd pointer and preserve
it when a device-private folio is split. Keeping the state on the physical
folio also avoids depending on a virtual address that may change before a
fault occurs.
v2:
- Replace the retired-PFN XArray with an embedded bitmap. (Matthew Brost)
- Mark every base page covered by a migrated folio so retirement remains
valid if the folio is later split.
v3:
- Store the migrated state in a low bit of zone_device_data instead of
adding virtual-range and bitmap tracking to the ZDD. (Matthew Brost)
- Mask the flag when retrieving the ZDD and preserve it when splitting
a folio.
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
v4:
- Advance by the folio size only for migration entries marked with
MIGRATE_PFN_COMPOUND. (Sashiko)
v5:
- Simplify ZDD flag updates and folio iteration. (Matthew Brost)
- Skip retired device-private folios in the CPU-fault path. (Matthew Brost)
- Preserve flag bits while taking a new ZDD reference for split folios.
v6:
- Restore MIGRATE_PFN_COMPOUND-aware stepping so non-compound migration
entries are processed one at a time. (Sashiko)
- Drop the pre-existing fixes already covered by Matthew Brost's series:
https://patchwork.freedesktop.org/series/171651/
The lockup was observed as:
[10109.860465] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [kworker/u65:5:6557]
[10109.860524] Tainted: [S]=CPU_OUT_OF_SPEC, [O]=OOT_MODULE
[10109.860524] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[10109.860525] Workqueue: xe_page_fault_work_queue xe_pagefault_queue_work [xe]
[10109.860644] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80
[10109.860655] Call Trace:
[10109.860655] <TASK>
[10109.860657] folio_lruvec_lock_irqsave+0x216/0x220
[10109.860661] ? __pfx_lru_add+0x10/0x10
[10109.860665] folio_batch_move_lru+0xc8/0x450
[10109.860670] ? lock_acquire+0xc4/0x2d0
[10109.860674] ? __folio_batch_add_and_move+0x60/0x2e0
[10109.860677] ? folio_migrate_mapping+0xa6/0x110
[10109.860679] ? folio_migrate_flags+0x13b/0x1b0
[10109.860681] ? __pfx_lru_add+0x10/0x10
[10109.860683] __folio_batch_add_and_move+0xe7/0x2e0
[10109.860685] ? dma_iova_try_alloc+0xb0/0x140
[10109.860689] folio_add_lru+0x64/0x80
[10109.860691] __migrate_device_finalize+0x12c/0x270
[10109.860695] migrate_device_finalize+0x10/0x20
[10109.860698] drm_pagemap_evict_to_ram+0x185/0x370 [drm_gpusvm_helper]
[10109.860704] ? drm_pagemap_evict_to_ram+0x96/0x370 [drm_gpusvm_helper]
[10109.860709] xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860819] ? xe_svm_bo_evict+0x15/0x20 [xe]
[10109.860921] xe_bo_move+0x107e/0x1570 [xe]
[10109.860992] ? xe_ttm_tt_create+0x168/0x340 [xe]
[10109.861059] ? __up_read+0x98/0x2b0
[10109.861061] ? lock_is_held_type+0xa3/0x130
[10109.861067] ttm_bo_handle_move_mem+0xe8/0x1e0 [ttm]
[10109.861075] ttm_bo_evict+0x141/0x1c0 [ttm]
[10109.861081] ttm_bo_evict_cb+0x9f/0x100 [ttm]
[10109.861086] ttm_lru_walk_for_evict+0x84/0x190 [ttm]
[10109.861091] ? xe_ttm_vram_mgr_new+0x258/0x3a0 [xe]
[10109.861198] ttm_bo_alloc_resource+0x219/0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: bound firmware ID by TLV length
The firmware ID is treated as a NUL-terminated string even though the
TLV length is its only boundary. If the value does not contain a NUL
terminator, snprintf() can read beyond the received response.
Limit the conversion to the advertised TLV value length. |
