| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, the web application's meetings filter feature leaks whether a given user ID corresponds to a valid account and discloses the user's full name, allowing an attacker to enumerate all existing user accounts by probing user IDs and observing differences in the server response. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, Business Logic Error on OpenProject through PATCH request to /api/v3/users/me permits to bypass password requirements. A password validation flaw in the change password behavior allows attackers to change a user's password only with an active session takeover. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| A weakness has been identified in 78 xiaozhi-esp32 up to 2.2.6. Affected by this issue is the function ParseMessage of the file main/mcp_server.cc of the component MCP Response Handler. This manipulation causes improper synchronization. Remote exploitation of the attack is possible. The attack's complexity is rated as high. The exploitation is known to be difficult. The exploit has been made available to the public and could be used for attacks. The pull request to fix this issue awaits acceptance. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, OpenProject exposes a document update endpoint used to modify existing documents. The target document is loaded with visibility checks and then updated. During update, attacker-controlled attributes are applied to the persisted record before authorization is enforced. As a result, a user without :manage_documents in the source project can move and modify foreign project documents by setting project_id in a single PATCH request. This vulnerability is fixed in 17.3.2 and 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, `GET /api/v3/meetings/:meeting_id/agenda_items/:agenda_item_id` discloses private work package data from a linked work package that belongs to a private/inaccessible project. This vulnerability is fixed in 17.4.0. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, there is an IDOR through /projects/<A>/settings/project_storages/<A_ps_id> via PATCH parameter "storages_project_storage[project_folder_id]" leads to Access to Unauthorized Resources. A project-admin in one project can hijack the managed Nextcloud or OneDrive folder of another project on the same storage by writing the victim project's project_folder_id into the attacker's Storages::ProjectStorage row. The next managed-folder sync overwrites the ACL on the referenced folder with the attacker project's user list. This vulnerability is fixed in 17.3.3 and 17.4.1. |
| A security flaw has been discovered in CodeAstro Complaint Management System 1.0. The affected element is the function deletereport of the file application/controllers/Report.php of the component Report Endpoint. The manipulation results in authorization bypass. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend"
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix VM_BIND UNMAP locking
Wrong argument meant that the objs involved in UNMAP ops were not always
getting locked.
Since _NO_SHARE objs share a common resv with the VM (which is always
locked) this would only show up with non-_NO_SHARE BOs.
Patchwork: https://patchwork.freedesktop.org/patch/713898/ |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Fix WARN_ON in __iommu_group_set_domain_nofail() due to reset
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix AMDGPU_INFO_READ_MMR_REG
There were multiple issues in that code.
First of all the order between the reset semaphore and the mm_lock was
wrong (e.g. copy_to_user) was called while holding the lock.
Then we allocated memory while holding the reset semaphore which is also
a pretty big bug and can deadlock.
Then we used down_read_trylock() instead of waiting for the reset to
finish.
(cherry picked from commit 361b6e6b303d4b691f6c5974d3eaab67ca6dd90e) |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: check for device unregister when creating assoc
psp_assoc_device_get_locked() obtains a psp_dev reference via
psp_dev_get_for_sock() (which uses psp_dev_tryget() under RCU);
it then acquires psd->lock and drops the reference. Before
the lock is taken, psp_dev_unregister() can run to completion:
take psd->lock, clear out state, unlock, drop the registration
reference.
The expectation is that the lock prevents device unregistration,
but much like with netdevs special care has to be taken when
"upgrading" a reference to a locked device. Add the missing
check if device is still alive. psp_dev_is_registered() exists
already but had no callers, which makes me wonder if I either
forgot to add this or lost the check during refactoring... |
| OpenProject is open-source, web-based project management software. Prior to 17.4.0, the GET /api/v3/relations endpoint allows any authenticated user to retrieve relations — and the subject (title) of work packages they have no permission to view — by supplying an arbitrary work package ID in the involved, fromId, or toId filter. This bypasses the Relation.visible scope due to a flawed performance optimization in RelationQuery. This vulnerability is fixed in 17.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
Calling perf_allow_kernel() from the NMI context is unsafe and could be
fatal. Capture the permission at event-initialization time by storing it
in event->hw.flags, and have the NMI handler rely on that cached flag
instead of making the call directly. |
| Broken Access Control in the devLXDInstancePatchHandler component of Canonical LXD allows an untrusted guest to mount, read, and overwrite another guest's custom storage volume via a crafted device PATCH request over /dev/lxd when security.devlxd.management.volumes is enabled. |
| AutoGPT is a workflow automation platform for creating, deploying, and managing continuous artificial intelligence agents. Prior to , the `POST /api/integrations/webhooks/{webhook_id}/ping` endpoint fetches the target webhook by primary key alone without verifying that the webhook belongs to the authenticated user. Any authenticated user can supply an arbitrary webhook_id to confirm webhook existence, leak the webhook's OAuth provider type, and in some cases trigger a ping delivery on behalf of another user. This vulnerability is fixed in . |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.45.0 until 2.91.0, the METS-GBS backend's XML parsing and the input document format detection lacked security controls. An attacker could craft malicious METS-GBS archives that, when processed, could read sensitive files, exhaust system resources, or cause application crashes. This vulnerability is fixed in 2.91.0. |
| Unauthenticated Insecure Direct Object References (IDOR) in JS Help Desk <= 3.1.0 versions. |
| Subscriber Insecure Direct Object References (IDOR) in Majestic Support <= 1.1.7 versions. |
