Export limit exceeded: 409935 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409935 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98562 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one. | ||||
| CVE-2026-98560 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: size a connection's path set by the transport it ends up with __rds_conn_create() computes npaths from the caller's transport before it decides whether a connection to one of the host's own addresses is to be handled by the loopback transport instead. That substitution is what an RDS/TCP socket sending to a local address gets, and after it the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS paths and allocates an ordered workqueue for each, while rds_loop_conn_alloc() only ever provides transport data for path 0. rds_conn_destroy() sizes its teardown from c_trans, by then the loopback transport, so it visits path 0 only - and rds_conn_path_destroy() would skip the other paths anyway, since it returns before destroy_workqueue() for a path without transport data. kfree(c_path) then drops the last pointers to seven workqueues. That repeats for every such connection, on every netns teardown or module unload, and every distinct local destination address is a separate connection. Recompute npaths once the transport is final, so that creation and destruction agree on the set of paths. The c_path array stays sized for the caller's transport; the unused entries are freed with it. | ||||
| CVE-2026-98559 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix UAF on lgr list traversal in smcr_port_err() smcr_port_err() traverses smc_lgr_list.list without holding smc_lgr_list.lock, allowing a concurrent smc_lgr_terminate_sched() to free an lgr while it is still being dereferenced. Hold smc_lgr_list.lock across the traversal. Update smc_ib_gid_check() to call smcr_port_err() after releasing the lock. | ||||
| CVE-2026-98558 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: flush skb_defer_nodes in dev_cpu_dead() When a CPU goes offline, dev_cpu_dead() drains its softnet queues (completion_queue, output_queue, poll_list, process_queue, and input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched. If oldcpu goes offline while holding pending skbs in its skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI threshold, or if the IPI races with CPU teardown), those skbs remain stranded until oldcpu is brought back online. If any of these skbs hold page_pool fragments, page_pool_destroy() will stall indefinitely waiting for inflight pages to be returned when a netdev or driver is torn down while oldcpu is offline. Additionally, if smp_call_function_single_async() fails in kick_defer_list_purge() because the target CPU went offline, reset defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the CPU comes back online. Also, if oldcpu was the last online CPU on its NUMA node, drain that node's slot across all CPUs so no skbs deferred from that node remain stranded on idle remote CPUs (or if the node itself is subsequently offlined). Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and whether the caller migrated CPUs after llist_add(), flushing the node list if so, to close the preemption TOCTOU race against CPU/node teardown. | ||||
| CVE-2026-98557 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO gve_can_send_tso() computes how many buffers each segment of a GSO packet would span, and for this it needs the length of the headers that the device replicates in front of every segment. It unconditionally uses skb_tcp_all_headers(), which reads the doff field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header: tcp_hdrlen() then reads one byte of the UDP payload, and header_len can be anything in [0, 60] instead of the transport offset plus the eight bytes of the UDP header that gve_prep_tso() programs into the TSO context descriptor. A wrong header length shifts all the segment boundaries computed in the loop, so the number of buffers per segment can be over or under estimated. In the first case, GSO is needlessly disabled for this packet by gve_features_check_dqo() and the stack has to segment it. In the second case, the driver hands the device a packet whose segments span more than GVE_TX_MAX_DATA_DESCS buffers. Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what gve_prep_tso() does. | ||||
| CVE-2026-98556 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gve: DQO: reject TSO packets with an out of range MSS gve_prep_tso() notes that the device requires the MSS to be <= 9728, but does not enforce it, assuming the 9K MTU enforced by the hypervisor and the 64KB limit on TSO sizes are enough. This does not hold for packets that were not generated locally. A guest behind a tap, or any packet socket user, can provide an arbitrary gso_size in virtio_net_hdr. Layer 2 forwarding does not check the MTU for GSO packets (is_skb_forwardable()), and gso_features_check() only bounds skb->len and gso_segs, never gso_size. Such a packet reaches gve_tx_fill_tso_ctx_desc(), which puts gso_size into the mss field of the TSO context descriptor. This field is 14 bits wide, so a gso_size of 16384 is silently turned into an MSS of zero. Drop these packets from gve_prep_tso(), and make sure that gve_features_check_dqo() leaves their GSO bits alone: skb_segment() splits at gso_size regardless of the MTU, so falling back to software segmentation would give the device non TSO packets bigger than the 9728 bytes it supports. Note that the device can still be given oversized non TSO packets when the stack segments in software for other reasons, for instance after TSO has been disabled with ethtool. This is a generic issue, because the MTU check is skipped for GSO packets in the forwarding path, and is addressed separately. | ||||
| CVE-2026-98555 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: llc: fix skb UAF and leaks on llc_mac_hdr_init() failure In llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(), if llc_mac_hdr_init() fails, kfree_skb(skb) is called instead of kfree_skb(nskb). This leaks the newly allocated nskb, reads from the freed skb via LLC_I_GET_NR(pdu), and double-frees skb when llc_conn_state_process() drops its reference. In llc_sap_action_send_xid_r() and llc_sap_action_send_test_r(), nskb is leaked if llc_mac_hdr_init() returns an error. Free nskb in all three error paths. | ||||
| CVE-2026-98554 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vlan: ensure sufficient headroom in vlan_dev_hard_header() Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()), or skbs allocated before dynamic device/headroom changes (e.g. toggling VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach vlan_dev_hard_header() with insufficient headroom and trigger skb_under_panic(). Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR is not set to ensure sufficient headroom for the VLAN header(s) and the underlying device hard header. Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as they can be updated concurrently under RTNL (e.g. in vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the extra HH_DATA_MOD alignment padding does not trigger unnecessary pskb_expand_head() reallocations on inner stacked VLAN devices after the outer VLAN header has been pushed. | ||||
| CVE-2026-98551 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fill branch entries with a single assignment perf_clear_branch_entry_bitfields() clears the bitfields of struct perf_branch_entry one by one and leaves from/to alone, since callers overwrite those straight away. The list has to be kept in sync with the struct by hand and has already fallen behind: new_type and priv were added to perf_branch_entry and never added here. Only BRBE writes those two, and neither for every record. brbe_set_perf_entry_type() leaves new_type alone for a branch type it does not recognise, and priv is not set for source-only records. arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a record reaches userspace with whatever the slot held: uninitialised kmalloc() data on the first pass over the buffer, the previous record's values after that. Nothing under arch/x86/events/ writes either field, so only arm64 is affected. Assign the whole entry at each site instead. Everything not named is then zero, and there is no list to keep in sync. The bitfields add up to exactly 64 bits, so the struct has no padding to leave undefined. perf_clear_branch_entry_bitfields() has no callers left, so remove it. perf_entry_from_brbe_regset() assigns an empty literal instead, since it fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the explicit spec assignment changes nothing. | ||||
| CVE-2026-98542 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict When a remote partition is created underneath an existing local partition via a non-partition (PRS_MEMBER) intermediate cgroup, update_prstate() sees parent->partition_root_state == PRS_MEMBER and calls remote_partition_enable(). Commit 86888c7bd117 ("cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs") replaced the cpumask_intersects(tmp->new_cpus, subpartitions_cpus) error check in remote_partition_enable() with WARN_ON_ONCE(). As a result, remote_partition_enable() emits a warning and proceeds to enable the remote partition on CPUs that are already owned by the ancestor local partition in subpartitions_cpus. This can be reproduced on Linux 7.3.0-rc3 with: mkdir -p /tmp/cg1 mount -t cgroup2 none /tmp/cg1 echo "+cpuset" > /tmp/cg1/cgroup.subtree_control mkdir /tmp/cg1/A echo 1 > /tmp/cg1/A/cpuset.cpus echo 1 > /tmp/cg1/A/cpuset.cpus.exclusive echo root > /tmp/cg1/A/cpuset.cpus.partition echo "+cpuset" > /tmp/cg1/A/cgroup.subtree_control mkdir /tmp/cg1/A/B echo 1 > /tmp/cg1/A/B/cpuset.cpus echo 1 > /tmp/cg1/A/B/cpuset.cpus.exclusive echo "+cpuset" > /tmp/cg1/A/B/cgroup.subtree_control mkdir /tmp/cg1/A/B/D echo 1 > /tmp/cg1/A/B/D/cpuset.cpus echo 1 > /tmp/cg1/A/B/D/cpuset.cpus.exclusive echo root > /tmp/cg1/A/B/D/cpuset.cpus.partition which triggers: WARNING: kernel/cgroup/cpuset.c:1594 at remote_partition_enable+0x1c1/0x300 and leaves both /tmp/cg1/A and /tmp/cg1/A/B/D as active root partitions claiming exclusive CPU 1. Fix this by returning PERR_NOCPUS when tmp->new_cpus intersects subpartitions_cpus in remote_partition_enable(), matching the error code used by remote_cpus_update() for the same subpartitions_cpus conflict, and add a regression test case to tools/testing/selftests/cgroup/test_cpuset_prs.sh. Tested in QEMU on Linux 7.3.0-rc3 using the reproducer above and tools/testing/selftests/cgroup/test_cpuset_prs.sh. | ||||
| CVE-2026-98539 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: use d_instantiate_new() in ntfs_create_inode() and murder syzbot's "WARNING in do_new_mount" saga ntfs_create_inode() creates a new inode via ntfs_new_inode(). It hashes it with insert_inode_locked() and so it's marked as I_NEW until unlock_new_inode(). ntfs 3 calls d_instantiate() in between though... Since the dentry was already hashed by the lookup before the create any path walk finds it without touching the parent's i_rwsem and so can lock the inode. If the inode is a directory unlock_new_inode() calls lockdep_annotate_inode_mutex_key() and marks i_rwsem with the i_mutex_dir_key class. That resets the count and the owner of a lock somebody else may already hold by now... syzbot has been spamming us with the same godforsaken bug "WARNING in do_new_mount" since 2023. I can't take it anymore so I went looking. Afaict, syzbot's executor chdirs into a freshly mounted ntfs3 image, creates a directory and then mounts some pseudofs on it. Everytime the mkdir() takes longer than syzbot waits mount() runs concurrently: mkdir("./sys") mount(NULL, "./sys", "sysfs") ntfs_create_inode() d_instantiate() user_path_at() finds the dentry do_lock_mount() inode_lock(inode) namespace_lock() unlock_new_inode() lockdep_annotate_inode_mutex_key() init_rwsem(&inode->i_rwsem) unlock_mount() inode_unlock(inode) The mount side then releases a lock that according to the rwsem nobody holds: DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && ...): count = 0x0, magic = 0xffff888043a854e8, owner = 0x0, curr 0xffff888000244880, list empty WARNING: CPU: 0 PID: 5346 at kernel/locking/rwsem.c:1368 __up_write Call Trace: inode_unlock include/linux/fs.h:877 [inline] unlock_mount fs/namespace.c:2892 [inline] do_new_mount_fc fs/namespace.c:3828 [inline] do_new_mount+0x777/0xa40 fs/namespace.c:3887 On PREEMPT_RT the same thing shows up as DEBUG_LOCKS_WARN_ON(rt_mutex_owner(lock) != current) WARNING: kernel/locking/rtmutex_common.h:193 at rt_mutex_slowunlock The up_write() underflows the reset count. A following inode_lock() on that directory then never returns. A path walk into the new directory racing with the mkdir() corrupts the lock the same way via inode_lock_shared() in lookup_slow(). Switch to d_instantiate_new() and drop the trailing unlock_new_inode(). All error paths bail out before that point with I_NEW still set and keep using discard_new_inode(). May we never see this fscking bug report again. | ||||
| CVE-2026-98538 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: writeback: bound cleanup_offline_cgwb() rescans by rotating scanned inodes cleanup_offline_cgwb() prepares at most WB_MAX_INODES_PER_ISW inodes per call and is called again until the dying wb is drained, but every call walks wb->b_attached and then wb->b_dirty_time from the same end. Inodes already prepared (they stay on the list with I_WB_SWITCH set until the switch worker runs) and inodes that cannot be switched (I_FREEING, I_WILL_FREE, !SB_ACTIVE, DAX, already on the target wb) stay where they are, so each pass rescans a growing run of them under wb->list_lock and a full drain is quadratic in the number of inodes on the list. With ~17M inodes attached to one dying cgwb we saw this end in soft lockups, with CPUs reported stuck for 21-48s. Walk both lists from the oldest end and move every scanned inode to the newest end, so the next pass starts where the previous one stopped and the drain becomes linear. b_attached is unordered, so nobody sees the reorder there. b_dirty_time is ordered by dirtied_when, but the oldest unscanned inode stays at the end move_expired_inodes() picks from, sync takes the whole list regardless of order, and prepared inodes leave the list as soon as the switch work runs and get a new dirtied_time_when on the new wb anyway, so the only inodes left out of order are the ones that can never switch (DAX), and only on the dying wb. | ||||
| CVE-2026-98536 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: writeback: report a Tasks-RCU quiescent state per cgwb drain pass cleanup_offline_cgwbs_workfn() drains a dying cgwb by calling cleanup_offline_cgwb() until it returns false, with a cond_resched() between passes. On a CONFIG_PREEMPTION kernel that cond_resched() does nothing: _cond_resched() is a plain "return 0", and under PREEMPT_DYNAMIC the full and lazy modes disable it. Since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes") those are the only two models on the architectures with PREEMPT_LAZY support, arm64 and x86 among them, so the drain loop never reports a Tasks-RCU quiescent state. A worker draining a cgwb with millions of attached inodes runs for minutes. On a 6.18 arm64 host in lazy mode the cgwb worker drained one dying cgroup's writeback domain for over 11 minutes. A BPF program unlink (bpf_trampoline_unlink_prog -> bpf_trampoline_update -> unregister_ftrace_direct -> ftrace_shutdown -> synchronize_rcu_tasks()) waited on that grace period while holding the trampoline mutex, 42 tasks queued behind it in D state, and the hung task detector fired at 614 s and panicked the host. Any BPF or ftrace detach during a long drain inherits the drain's length. Fix this by calling cond_resched_tasks_rcu_qs() so we do not stall out anybody who calls sycnrhonize_rcu_tasks(). We put this in a do { } while loop because if we have many small cgroups cleanup_offline_cgwb() will return false and we will never call cond_resched_tasks_rcu_qs(), creating the same problem. | ||||
| CVE-2026-98535 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix clk reference leak in read_dts_node() of_clk_get() returns a clock with its reference count incremented, but read_dts_node() only uses it to read the rate and never calls clk_put(). The clock is not stored anywhere, so the reference cannot be released later either. Release the clock once its rate has been read, which also covers the error path taken when the rate is zero. | ||||
| CVE-2026-98532 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walks the extension header chain, skipping each header by the length that header itself declares. ipv6_optlen() returns up to 2048, and the skip is never checked against skb->len, so the offset stored in *offset can point past the end of the packet. openvswitch installs that offset as the transport header, and update_ipv6_checksum() then reads and writes the transport checksum field out of bounds: BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470 Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629 CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348 Call Trace: inet_proto_csum_replace16+0x445/0x470 set_ipv6_addr+0x3dd/0x460 do_execute_actions+0x6a3d/0x7c40 ovs_execute_actions+0xfd/0x480 ovs_packet_cmd_execute+0xc38/0xf20 genl_rcv_msg+0x59e/0x870 netlink_rcv_skb+0x18b/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x6bc/0xa20 The buggy address belongs to the object at ffff88810b754980 which belongs to the cache skbuff_small_head of size 704 The buggy address is located 390 bytes inside of freed 704-byte region [ffff88810b754980, ffff88810b754c40) Other callers use that offset too, so bound it here rather than in one caller. Reject a header whose declared length does not fit in the packet. ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this adds no new failure mode. | ||||
| CVE-2026-98527 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: zynq: fix runtime PM leak on request error path pm_runtime_get_sync() leaves the usage counter incremented even when it fails, and zynq_gpio_request() returns the error without dropping it. gpiolib does not call ->free() when ->request() fails, so zynq_gpio_free(), which holds the only matching pm_runtime_put(), never runs. The reference is leaked and the controller can no longer runtime-suspend, so its clock stays enabled. Switch to pm_runtime_resume_and_get(), which only increments the usage counter on success. | ||||
| CVE-2026-98526 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: llc: reserve device headroom for allocated frames llc_alloc_frame() reserves link-layer headroom using the device type. This is insufficient for stacked Ethernet devices such as VLAN devices, where vlan_dev_hard_header() pushes a VLAN header before the lower device's Ethernet header. An LLC response on such a device can therefore underflow skb headroom in eth_header(). Use LL_RESERVED_SPACE() to account for the device's actual required headroom while preserving the existing LLC device-type check. | ||||
| CVE-2026-98525 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mctp: route: iterate socket tag list in mctp_lookup_prealloc_tag() When a socket transmits a packet with MCTP_TAG_PREALLOC set, mctp_lookup_prealloc_tag() iterates over the per-netns &mns->keys list and matches netid, req_tag, peer_addr, and manual_alloc, without checking whether tmp->sk == &msk->sk. This allows any MCTP socket in the same network namespace to use and consume another socket's preallocated tag. Iterate the socket's own tag list (&msk->keys via sklist) instead of the namespace-wide &mns->keys list in mctp_lookup_prealloc_tag(), ensuring that only tags allocated by msk are matched. Tested in QEMU against Linux 7.3.0-rc3 by allocating a manual tag (0x18) on socket A via SIOCMCTPALLOCTAG for peer EID 9 and sending a 4-byte message with MCTP_TAG_PREALLOC from socket B in the same network namespace. On the unfixed kernel, sendto(sock_b) using socket A's preallocated tag succeeds (ret = 4); with this patch applied, sendto(sock_b) fails with -ENOENT (errno = 2) while sendto(sock_a) succeeds (ret = 4). | ||||
| CVE-2026-98524 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rds: ib: Clear the sg list when mapping an MR fails rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA mapping and registration can fail. On failure, __rds_rdma_map() unpins the pages and frees the scatterlist, but rds_ib_free_frmr() can still return the MR to the pool with the stale pointer set. This leaves the pool with a dangling scatterlist and can lead to local privilege escalation. KASAN detects the resulting use-after-free when the MR is later torn down: BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr Read of size 8 Call Trace: __rds_ib_teardown_mr rds_ib_unreg_frmr rds_ib_flush_mr_pool rds_ib_flush_mrs rds_free_mr rds_setsockopt Store the scatterlist in the MR only after DMA mapping succeeds. If DMA mapping fails, return directly while the MR fields remain clear; the caller keeps ownership of the scatterlist and its pinned pages. If a later registration step fails, unmap the scatterlist and clear the MR fields before returning. | ||||
| CVE-2026-98522 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl() Map failure from pvr_mmu_map_sgl() interface was not returned correctly to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to continue instead of returning an error to caller. Fix it by returning a proper error code from pvr_mmu_map_sgl() interface. Call stack for crash: [ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 1179.295067] Mem abort info: [ 1179.297877] ESR = 0x0000000096000004 [ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits [ 1179.306987] SET = 0, FnV = 0 [ 1179.310048] EA = 0, S1PTW = 0 [ 1179.313198] FSC = 0x04: level 0 translation fault [ 1179.318096] Data abort info: [ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000 [ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 [ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP [ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6 [ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT [ 1179.388120] Tainted: [D]=DIE [ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT) [ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] [ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr] [ 1179.416848] sp : ffff8000839ab8c0 [ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000 [ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6 [ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247 [ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002 [ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480 [ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8 [ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007 [ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000 [ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000 [ 1179.491433] Call trace: [ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P) [ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr] [ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr] [ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm] [ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm] [ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr] [ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr] [ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr] [ 1179.534018] drm_ioctl_kernel+0xb8/0x128 [ 1179.537941] drm_ioctl+0x21c/0x4ec [ 1179.541337] __arm64_sys_ioctl+0xac/0x108 [ 1179.545344] invoke_syscall+0x44/0x100 [ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0 [ 1179.553790] do_el0_svc+0x1c/0x28 [ 1179.557106] el0_svc+0x34/0xf0 [ 1179.560159] el0t_64_sync_handler+0xd0/0xe4 [ 1179.564334] el0t_64_sync+0x198/0x19c [ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421) [ 1179.574081] ---[ end trace 0000000000000000 ]--- | ||||