| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: get the wiphy out of a dying network namespace
When a network namespace is destroyed, cfg80211_pernet_exit() moves any
wiphy back to the initial namespace, and just warns if that fails. But
moving an interface can fail (due to allocation failures), and then the
wiphy is left behind with a garbage netns pointer:
Kernel mode fault at addr 0x30
genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211]
nl80211_notify_wiphy+0xcd/0xe8 [cfg80211]
wiphy_unregister+0x169/0x3fc [cfg80211]
Note that commit debac3a20dec ("net: Remove conflicting altnames for
dying netns in __dev_change_net_namespace().") fixed another path
that could reach it without allocation failures.
Remove interfaces that cannot be moved instead of failing the switch,
so that the wiphy always ends up in the initial namespace. In this
case the netdev core will unregister the interfaces anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix potential UAF after asynchronous card release
Usually a sound driver releases the resources assigned to the card via
snd_card_free(), and it synchronizes with the whole release procedure.
However, when the card is released asynchronously via
snd_card_free_when_closed() like USB-audio driver, the situation is
slightly different; although the snd_card_disconnect() call at the
disconnection guarantees that any newer accesses will be gated, the
in-flight tasks might be still accessing to the underlying card->dev
device even after the disconnection, which would cause a
use-after-free in the end, as reported by fuzzers.
For addressing the bug above, this patch takes the refcount of
card->dev at initialization of the card object, and releases at its
destructor. This assures the availability of the card->dev in its
whole lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid()
kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops
mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a
reference on the kvm_nested_guest pointer obtained from the IDR. A
concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race
through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove /
--refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving
the iterating vCPU with a dangling pointer. The subsequent
mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable,
gp->shadow_lpid and gp->l1_host all touch freed memory. The free path
is fully L1-controlled.
Fix this by incrementing gp->refcnt inside the loop before dropping
mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the
reference with kvmhv_put_nested() after the per-guest work completes.
This is the same get/put discipline already used at every other
call site that drops mmu_lock while holding a nested-guest pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: wait for RCU readers before releasing dma_device
dma_issue_pending_all() walks the dma_device_list with
list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release()
unlinks the device with list_del_rcu() and then calls
device->device_release() (which in many drivers, such as plx_dma.c,
directly calls kfree()).
Because there is no grace period between unlinking the device and
freeing it, concurrent RCU readers in dma_issue_pending_all() can
access the device after it has been freed.
The lockless walk originally relied on clients holding a dmaengine
reference to pin the provider module, and therefore the device, for as
long as they might traverse the list. Commit 8ad342a86359 ("dmaengine:
Add reference counting to dma_device struct") decoupled the dma_device
lifetime from the module reference, so the device can now be released
while a reader is still walking the list.
Add synchronize_rcu() before the device is freed, so RCU readers are
guaranteed to have finished. Keep it unconditional: providers that do
not implement device_release() free the device themselves once
dma_async_device_unregister() returns. This call will delay for a grace
period with dma_list_mutex held, which is safe and only teardown path is
delayed. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.
dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:
slab-use-after-free in dma_chan_put+0x3e6/0x4c0
Read of size 8 by task insmod/6319
Freed by task 6319:
kfree+0x225/0x470
dma_chan_put+0x395/0x4c0
dmaengine_put+0xf8/0x160
Cache the module owner in dma_chan_put() before the put so the trailing
module_put() does not need chan->device. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: retain mapped dropbehind folios
Fault-around can map ready dropbehind folios without going through the
normal page-cache lookup that clears dropbehind. A mapping represents a
competing cached user, so retain the folio instead of forcibly unmapping
it when writeback completes.
For a mapped folio, folio_unmap_invalidate() can call
unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining
mapped folios avoids this path when folio_end_dropbehind() runs in
non-preemptible task context.
Tal was able to trigger a sleeping-in-atomic warning due to this [1].
Unmapped dropbehind folios continue through the existing invalidation path. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: atr: fix dangling adapter pointer on add failure
i2c_atr_add_adapter() stores atr->adapter[chan_id] before
i2c_add_adapter() so that the I2C bus notifier can match child clients
during registration. On failure the channel is freed but the slot was
left pointing at freed memory, which can lead to use-after-free in
i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST.
Clear the slot on the i2c_add_adapter() error path before freeing chan. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: don't transfer operstate before register
virt_wifi_newlink() calls netif_stacked_transfer_operstate() before
register_netdevice(). If the lower device is dormant, that queues the
new netdev on lweventlist while it is still uninitialized. If
registration fails after that, for example because of an invalid name
such as "bad/name", free_netdev() immediately frees the object. A
later linkwatch_fire_event() then use-after-frees the list entry.
Move the transfer to after netdev_upper_dev_link(), as macvlan and
ipvlan already do. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: use hlist_del_init_rcu for state_cache and state_cache_input
Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in
__xfrm_state_delete") converted bydst/bysrc/byseq/byspi from
hlist_del_rcu() to hlist_del_init_rcu() so that a second
__xfrm_state_delete() on the same object becomes a no-op rather than a
write through LIST_POISON pprev. It missed state_cache and
state_cache_input, which kept hlist_del_rcu():
- hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so
hlist_unhashed() returns false.
- hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed()
returns true.
A second __xfrm_state_delete() therefore enters __hlist_del() on the
already-deleted state_cache/state_cache_input nodes and does
WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free
once the slab is reused. The corruption can in turn cause a subsequent
hlist_for_each_entry_rcu traversal to follow a dangling next pointer,
producing the read use-after-free reported in xfrm_input_state_lookup().
Switch state_cache and state_cache_input to hlist_del_init_rcu() to
match the other four lists, closing the write use-after-free and, with
it, the read use-after-free it spawns. |
| heap OOB write in convert_file_from_to() via a crafted Content-Type header allows attacker to OOB write when email is used as a template. |
| The Affinity by Canva app before 3.3.1 (October 2026 release) did not perform adequate bounds checking when parsing Affinity document files, leading to an out-of-bounds pointer dereference. A threat actor could craft an Affinity document that, when opened by a user in Affinity, could result in an application crash. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip unsettled links in link iterator
bpf_link_prime() inserts a link into link_idr before anon_inode_getfile()
succeeds and before bpf_link_settle() publishes the ID in link->id.
bpf_link_by_id() treats such an ID-zero link as unsettled, but the link
iterator takes a reference without this check.
If anon_inode_getfile() then fails, the creator removes the ID and frees
its still-private link directly. The iterator is left with a dangling
reference and its next bpf_link_put() accesses freed memory.
Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as
bpf_link_by_id() does.
BUG: KASAN: slab-use-after-free in bpf_link_put
Write of size 8 by task exp/384
Call Trace:
bpf_link_put kernel/bpf/syscall.c:3372
bpf_link_seq_next kernel/bpf/link_iter.c:33
bpf_seq_read kernel/bpf/bpf_iter.c:158
vfs_read fs/read_write.c:572
ksys_read fs/read_write.c:716
do_syscall_64 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: preserve mremap address delta when skipping page tables
move_hugetlb_page_tables() optimizes mremap() by advancing to the last
entry in the page table when the source page table does not exist, either
initially or after unsharing a PMD table. The common loop increment then
steps to the first entry in the next page table.
However, the code advances both the source and destination addresses to
the last entries in their respective page tables, which is wrong. The
destination address must be advanced only by the same amount as the source
address.
If the source and destination offsets within their page tables differ, the
destination address can be advanced too far, causing follow-up issues.
Fix this by advancing the destination address by the source advance
distance.
With a reproducer, we were able to trigger a kernel panic on x86-64. With
this fix in place, we can no longer reproduce the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasing host").
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mxcmmc: cancel data work and watchdog on remove
mxcmci_remove() frees the host through the devm tail, but neither it nor
mmc_remove_host() drains the driver's own asynchronous state.
host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(),
is deleted only by the DMA- and IRQ-complete paths, which the remove path
does not explicitly drain; it can therefore fire after the host is freed
and dereference it in mxcmci_watchdog(). host->datawork, armed from the
IRQ handler on the PIO path, is not cancelled by the remove path either.
Free the devm-registered IRQ, then cancel datawork and delete the watchdog
in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first
keeps a trailing handler from re-arming datawork between the cancel and
the host free. Both callbacks are non-self-rearming.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack()
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mmci: Fix use-after-free in busy-timeout work
ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b
command, but mmci_remove() never cancels it. The work can subsequently
dereference the devm-allocated mmci_host after it has been released.
Mask the controller interrupts and disable the delayed work during
removal. This drains any queued instance and stops an IRQ handler that
is still in progress from queueing the work again once it has been
disabled.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has already stopped the host, so no new requests can
arm the work.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Close the pre-enable ops error claim window
scx_alloc_and_add_sched() publishes ops->priv before
scx_root_enable_workfn() switches the state to SCX_ENABLING. An error
claimed via scx_bpf_error_bstr() from an associated BPF program in that
window is consumed by scx_disable_workfn(), which takes the pre-enable
shortcut in scx_root_disable(). The shortcut returns without any teardown
and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg
racing the enable workfn's own transition. The enable then completes with
the claim consumed: the scheduler stays up but can never be disabled again,
and bpf_scx_unreg() frees it while still in use, resulting in a
use-after-free. Both WARN_ON_ONCE()s fire back to back:
WARNING: kernel/sched/ext/ext.c:7522 at
scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276
WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8,
CPU#0: sched_ext_helpe/664
scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler
allocation, so ops->priv is never visible while SCX_DISABLED. The allocation
failure path restores SCX_DISABLED. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Serialize join and leave on copy_to_user failure
rdma_join_multicast() queues RoCE work that later reads the ucma_multicast
through event->param.ud.private_data, then list_add()s the CMA multicast
at the head of id_priv->mc_list. rdma_leave_multicast() matches only by
sockaddr and destroys the first hit.
ucma_process_join() used to drop ctx->mutex after a successful join and
retake it only if copy_to_user() failed. Two concurrent JOIN_MCAST calls
with the same address can therefore insert a second CMA entry before the
first thread's leave. leave then cancels the newer work and the older
worker still dereferences the ucma_multicast that the first thread frees.
Keep ctx->mutex held from rdma_join_multicast() through copy_to_user() and,
on -EFAULT, through rdma_leave_multicast() so leave cannot miss this join.
Do not leave if join itself failed: that path never published this address
on mc_list, and a leave-by-addr would destroy an earlier successful join. |
