| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| MISP contains a race condition in the email-based one-time password (OTP) login flow. When two HTTP requests carrying the same valid OTP are submitted concurrently, both can successfully authenticate and establish a session. The root cause is that the OTP value is read from the shared store, validated, and then deleted in separate non-atomic steps, allowing a second in-flight request to read the same value before the first request's deletion takes effect.
Preconditions:
- The target MISP instance has email OTP login enabled.
- The attacker possesses a valid, unexpired OTP (e.g., via email interception or social engineering).
- The attacker can issue two HTTP POST requests in close temporal proximity.
Impact:
- The one-time-use guarantee of the OTP is violated; a single code can yield two authenticated sessions.
- This weakens the authentication control and may facilitate unauthorized access if the OTP is shared or intercepted.
Affected versions: <2.5.48 |
| Obot 0.25.0 before 0.25.6 and 0.26.0 before 0.26.1 contains a race condition in auth provider group refreshes that can restore group memberships just revoked in the identity provider. When overlapping refreshes for the same user commit out of order, stale memberships are persisted and the user retains revoked group-based access for about ten minutes. |
| In handle_app_val_response of btif_rc.cc, there is a possible way to achieve code execution due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Race condition in Fonts in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in Fonts in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Race condition in Fonts in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Race condition in V8 in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Avoid iteration of dying tasks with zero refcount
The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from
cgroup_task_release() to cgroup_task_free()") extended the lifetime of
tasks on the dying_tasks list.
The iterators have provision to go through dying_tasks because of
dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however,
it was expected that such tasks can obtain a new reference (that is
possible before cgroup_task_release()/put_task_struct_rcu_user()).
The tasks after cgroup_task_release() and before cgroup_task_free()
are subject to race when they may or may not have ->usage count > 0.
The race window is between css_task_iter_next() invocations
when css_set_lock is released and we may arrive at a new ->task_pos.
The iterator should not attempt to resurrect tasks whose ->usage count
dropped to zero. (When that happens, __put_task_struct_rcu_cb() is
already imminent and the returned task_struct would could be used
after free.)
As for the fix, we cannot simply check the signal->live count of a task
on the dying list because that won't distinguish regular zombies waiting
to be reaped from RCU remnant tasks that are going to be free'd.
Therefore add an extra check to rule out ->usage==0 tasks from any
iteration.
The repeat: loop in css_task_iter_advance() doesn't consider ->usage
count, so add a new loop to css_task_iter_next() to skip de-used tasks
on the dying_list.
Rough illustration of the possible race
R (reader of cgroup.procs) T (thread) L (group leader)
--------------------------------- -------------------------------- --------------------------------
L exits, signal->live > 0
cgroup_task_dead(L)
css_set_skip_task_iters() // skips only cset->tasks
list_add_tail(&L->cg_list, &cset->dying_tasks)
css_task_iter_next()
take css_set_lock
css_task_iter_advance()
leader && signal->live != 0
=> it->task_pos = &L->cg_list
release css_set_lock
T exits
--signal->live == 0
cgroup_task_dead(T) // css_set_lock
release_task(T)
cgroup_task_release(T)
release_task(L) // zap_leader
cgroup_task_release(L)
put_task_struct_rcu_user(L)
...RCU...
put_task_struct(L)
L->usage = 0
/* L still on dying_tasks */
...RCU...
__put_task_struct(L)
css_task_iter_next() // another iteration
take css_set_lock
it->task_pos = &L->cg_list
get_task_struct(L)
=> addition on 0
drop css_set_lock
cgroup_task_free(L)
css_set_skip_task_iters() // dying skip comes too late
free_task(L)
cgroup_procs_show()
task_pid_vnr(L) |
| In ep_free of eventpoll.c, there is a possible use-after-free due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by improper task state validation in scaffolder backend. An authenticated user with permission to create and access Scaffolder tasks may, under specific timing and deployment conditions, affect files accessible to the Backstage backend. If backend application files are writable, the confidentiality, integrity, and availability of the backend may be compromised. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: clear RX owner on VNET header error
Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race
condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2
ring slot before converting the virtio-net header. If the conversion
fails, the drop path leaves the slot claimed.
With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves
the only slot unavailable, so the ring also drops the next valid packet.
Clear the ownership bit on this error path. TPACKET_V3 already clears
its block state here. |
| Canimaan Software ClamXAV versions 3.3 - 3.11 contains a local privilege escalation vulnerability in the Privileged Helper Tool caused by a race condition and insufficient file validation, allowing a local attacker to execute arbitrary code with system privileges. Fixed in 3.11.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix race between rawmidi and disconnect
Although we tried to fix the potential UAF issues at USB disconnect on
bcd2000 driver, there is still an overlooked case -- namely, when a
rawmidi trigger callback has been already running at USB disconnect
handling, the in-flight function (e.g. bcd2000_midi_send()) could
still access the URB, because the previous URB NULL-check & clearance
was considered only for the URB complete callbacks, but not about the
parallel rawmidi operations.
For addressing the race, this patch introduced a new spinlock that
covers each rawmidi operation as well as the rawmidi handling in the
complete callback. The URB is cleared with the lock, so it guarantees
that the pending rawmidi task already finished or a NULL check is
effective. |
| Wasmtime is a runtime for WebAssembly. From 46.0.0 until 46.0.2 and 47.0.3, fuel and epoch preemption checks inside bulk operations including memory.copy, table.grow, and array.copy can expose invalid intermediate state when an embedder mutates a Store in Store::epoch_deadline_callback or continues using a Store after cancellation or a trap. A cancelled non-nullable table growth can leave null elements, linear-memory growth during memory.copy can invalidate retained raw pointers, and callback-triggered garbage collection during array.copy can invalidate GC pointers, resulting in a crash, invalid memory access, or GC heap corruption. Embeddings whose callbacks only access the host data in Store<T>, and embeddings that discard a Store after timeout or epoch deadline, are not affected. This issue is fixed in versions 46.0.2 and 47.0.3. |
| Plane is an open-source project management tool. From 0.13 until 1.4.0, InstanceAdminSignUpEndpoint in apps/api/plane/license/api/views/admin.py:89-117, 173-229 uses InstanceAdmin.objects.first() for the first-admin check and performs account creation without an atomic transaction, row lock, uniqueness guard, or advisory lock. Two concurrent unauthenticated requests with different email addresses can both observe that no instance administrator exists, create separate User and InstanceAdmin rows, and receive sessions with instance-admin authority. This allows an attacker to share unrestricted instance administration with the legitimate operator. This issue is fixed in 1.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| Sandbox escape due to race condition in the XPConnect component. This vulnerability was fixed in Firefox 156 and Thunderbird 156. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix race between deleting interface and adding new peer
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed. |
