| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Possible memory exhaustion in SFTP clients (DefaultSftpClient) in component sshd-sftp in Apache MINA SSHD versions 0.9.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5.
Apache
MINA SSHD is a Java library for client-side and server-side SSH. The sshd-sftp component provides support for SFTP.
The SFTP client implementation, when receiving a reply, did not check that this reply corresponded to a request sent earlier. Unsolicited replies would be stored but never consumed. A malicious server could keep sending unsolicited replies until available memory in the client was exhausted.
Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Apache Sling XSS.
This issue affects Apache Sling XSS: before 2.4.12.
Users are recommended to upgrade to version 2.4.12, which fixes the issue. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Apache Sling XSS.
This issue affects Apache Sling XSS: before 2.4.12.
Users are recommended to upgrade to version 2.4.12, which fixes the issue. |
| Improper restriction of recursive entity references in DTDs ('XML entity expansion') vulnerability in Apache Sling XSS.
This issue affects Apache Sling XSS: before 2.4.12.
Users are recommended to upgrade to version 2.4.12, which fixes the issue. |
| Uncontrolled resource consumption in component ssd-scp in Apache MINA SSHD versions up to 2.19.0 or 3.0.0-M1 to 3.0.0-M5. Apache MINA SSHD is a Java library for client-side and server-side SSH.
Component sshd-scp of Apache MINA SSHD provides a Java implementation of SCP. The SCP command protocol is line-oriented with LF-terminated lines. The protocol handler in sshd-scp did not impose any limit on the length of such protocol lines. A malicious peer just sending a junk command containing a never-ending sequence of characters but never a LF would cause the receiver to allocate memory to store this whole junk command, exhausting memory and crashing the application with an OutOfMemoryError.
Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by enforcing an upper limit on the length of SCP protocol lines. |
| U-Boot through 2026.10-rc5 contains an out-of-bounds write vulnerability in the video_display_rle8_bitmap function in drivers/video/video_bmp.c. Attackers can supply a crafted RLE8-compressed BMP image to corrupt memory adjacent to the framebuffer and crash the bootloader. |
| Cato Networks SDP Client for Windows before 6.12.6 allows a local user to delete arbitrary files with SYSTEM privileges via improper validation of a client-supplied SID over a local IPC named pipe. |
| Cato Windows SDP Client before version 6.12.6 contains an arbitrary file disclosure vulnerability. A low-privileged local user can cause the Windows service, running as Local System, to read and disclose arbitrary local files due to improper file path validation and missing TLS certificate enforcement. |
| Integer Overflow, Improper Validation of Array Index, Uncontrolled Recursion and Memory Allocation with Excessive Size Value in the Go implementation of Apache PLC4X (PLC4Go) allow a malicious device, or an attacker able to inject network traffic, to crash or exhaust the memory of the client application,
causing a denial of service.
The individual defects are:
- Generated parsers pre-allocate arrays with the element count claimed on the wire (0.13.0 through 0.13.1).
- Transport read helpers allocate buffers of the size claimed on the wire without an upper bound.
- ADS and KNXnet/IP response handling indexes into received data without checking its length, causing a panic.
- ADS and EIP frame-length handling accepts, or arithmetically wraps to, a length of zero, breaking message framing.
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Java implementation is covered by CVE-2026-102509 https://cveprocess.apache.org/cve5/CVE-2026-102509 .
Additionally, length and position arithmetic in generated serializers was performed in 16-bit integers. If an application forwards attacker-influenced payloads larger than 8 KB, the length field wraps, and the remainder of the payload may be interpreted by the receiving device (for example, an ADS PLC) as
additional, independent protocol messages.
This issue affects Apache PLC4X: from 0.11.0 before 1.0.0. PLC4Go is consumed as the Go module github.com/apache/plc4x/plc4go; versions refer to the corresponding Apache PLC4X releases.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Memory Allocation with Excessive Size Value, Allocation of Resources Without Limits, and Uncontrolled Recursion in the Java implementation of Apache PLC4X (PLC4J) allow a malicious or impersonated device to exhaust the memory or stack of the client application, causing a denial of service.
In the OPC UA driver these defects are reachable before authentication: the offending data is parsed while the secure channel and session are being established, before the server's identity has been bound to it. Configuring a trusted server therefore does not prevent exploitation by an attacker who can
impersonate it.
The individual defects are:
- Length-prefixed byte strings are allocated at the size claimed on the wire before the length is checked against the data actually received (0.10.0 through 0.13.1).
- Array fields in generated protocol parsers pre-allocate a list with the element count claimed on the wire, allowing a single count field to trigger a multi-gigabyte allocation. This parser is shared by all PLC4J drivers; the OPC UA driver is the verified pre-authentication path (0.10.0 through 0.13.1).
- The OPC UA driver accumulates message chunks without enforcing the negotiated maximum chunk count and message size (0.12.0 through 0.13.1).
- The OPC UA driver pre-allocates collections using element counts received from the server (0.10.0 through 0.13.1).
- Recursive protocol types are parsed without a nesting-depth limit. The same defect in the Go implementation is covered by CVE-2026-102510 https://cveprocess.apache.org/cve5/CVE-2026-102510 .
This issue affects Apache PLC4X: from 0.10.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. |
| Improper Verification of Cryptographic Signature and Improper Certificate Validation in the OPC UA driver of Apache PLC4X (PLC4J) allows an attacker in a network position between client and server to impersonate the OPC UA server and to read, forge or modify secure-channel traffic, including user credential ssent by the client.
The defect manifests differently depending on the version:
- In 0.9.0 through 0.11.0 a failed message-signature check is only logged and never enforced, and there is no mechanism to verify the server certificate: it is taken from the unauthenticated GetEndpoints discovery response and used to encrypt the user's password.
- In 0.12.0 through 0.13.1 the signature check is inverted (valid signatures are rejected, invalid ones accepted), and server certificates are accepted without a trust anchor by default.
- In all affected versions the default security policy is None. Starting with 0.12.0 the driver additionally continues silently at a weaker security policy than the one configured, and starting with 0.13.0 endpoint selection prefers the weakest matching endpoint.
Users checking only for one of these mechanisms may wrongly conclude they are unaffected.
This issue affects Apache PLC4X: from 0.9.0 before 1.0.0.
Users are recommended to upgrade to version 1.0.0, which fixes the issue. Version 1.0.0 verifies message signatures correctly, refuses to connect unless the server certificate can be verified against a configured trust store or pinned certificate, defaults to Basic256Sha256 with SignAndEncrypt, and fails the
connection if the negotiated security policy is weaker than the configured one. |
| Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final. |
| vLLM through 0.29.0 fetches and fully materializes remote or inline media before enforcing its documented media controls (the VLLM_MAX_AUDIO_CLIP_FILESIZE_MB compressed-audio size cap, default 25 MB, and the per-modality --limit-mm-per-prompt item limits). Across four ingress paths — the shared media-acquisition layer (HTTPConnection.get_bytes()/async_get_bytes()), the chat completions audio_url/base64 path, the batch speech runner, and the Rust frontend POST /tokenize route — the server reads the entire HTTP response body, base64-decodes the inline payload, or spawns one fetch/decode task per media part, and only then applies the limit (or, on some paths, never applies it). A remote attacker can therefore cause the API server or batch-runner process to allocate memory and consume outbound bandwidth proportional to an attacker-chosen body size or media item count before the request is rejected, resulting in pre-inference memory and bandwidth exhaustion (denial of service). The chat and batch surfaces require an API key when one is configured; the Rust frontend /tokenize route is unauthenticated by design. There is no code execution or data disclosure impact. |
| Joomla Extension - ordasoft.com - Reflected Cross-Site Scripting in Vehicle Manager (Free) < 6.5.8 - The public vehicle-detail page (task=view) echoes the title request parameter directly into a double-quoted HTML attribute with no output encoding of any kind. A double-quote character in the parameter closes the attribute, allowing arbitrary markup, including a <script> tag, to be injected into the page. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to make the client hold up to about 16 MiB per connection in frames it should reject, consuming client memory.
Mint.HTTP2.Frame.decode_next/2 in lib/mint/http2/frame.ex compares a frame with the client's max_frame_size (16,384 bytes by default) only once the whole declared payload has arrived. Until then it returns :more, and Mint.HTTP2 keeps every received byte in the connection buffer. A server can declare a frame length of up to 16,777,215 bytes and withhold the last byte, keeping roughly 1,024 times the advertised limit buffered for as long as the connection stays open. The server has to send every byte the client buffers, so there is no amplification, and the buffer stops at the 24-bit frame length limit.
This issue affects mint: from 0.1.0 before 1.10.2. |
| Contributor Cross Site Scripting (XSS) in OAuth Server <= 4.5.1 versions. |
| Out of bounds write in WebGL in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| Out of bounds write in GPU in Google Chrome on on Android prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical) |
| MISP contains a stored cross-site scripting (XSS) vulnerability in the galaxy icon handling path. The icon field of a galaxy object was persisted without any server-side validation through the galaxy add, edit, and sync/import capture endpoints. The stored value was subsequently concatenated directly into HTML markup by the D3-based correlation graph rendering scripts (both the default and Overmind themes) using the .html() method.
A user holding the perm_galaxy_editor permission, which is granted to the stock User role, could store arbitrary HTML or JavaScript in the icon field. Any other user who opened the correlation graph of an event containing a cluster belonging to that galaxy would have the injected script executed in their browser session.
Impact:
- Arbitrary script execution in the context of the victim's MISP session
- Potential theft of session credentials, manipulation of displayed data, or initiation of actions on behalf of the victim
- Affects both the default and Overmind UI themes
Affected versions: <2.5.48 |
| MISP renders the source field of a Galaxy Cluster as a clickable hyperlink whenever the stored value passes PHP's FILTER_VALIDATE_URL validation. Because FILTER_VALIDATE_URL accepts the javascript: URI scheme, a user with galaxy editor privileges on the local instance or on a synced instance could store a javascript: URL as the cluster source.
When another user views the affected Galaxy Cluster and clicks the rendered link, the embedded script executes in the victim's browser context, enabling session hijacking, data exfiltration, or actions performed on behalf of the victim.
Preconditions:
- Attacker must hold galaxy editor privileges (local or via sync).
- Victim must view the affected cluster and click the malicious link.
Impact:
- Stored cross-site scripting (XSS) in the victim's browser.
- Potential session theft, credential harvesting, or unauthorized actions within the MISP application.
Affected: <2.5.48. |
