Export limit exceeded: 407381 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (3159 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-2100 | 2 P11-kit Project, Redhat | 9 P11-kit, Cert Manager, Cost Management and 6 more | 2026-09-29 | 5.3 Medium |
| A flaw was found in p11-kit. A remote attacker could exploit this vulnerability by calling the C_DeriveKey function on a remote token with specific IBM kyber or IBM btc derive mechanism parameters set to NULL. This could lead to the RPC-client attempting to return an uninitialized value, potentially resulting in a NULL dereference or undefined behavior. This issue may cause an application level denial of service or other unpredictable system states. | ||||
| CVE-2026-49449 | 1 Laurent 22 | 1 Joplin | 2026-09-28 | 2.5 Low |
| Joplin is an open source note-taking and to-do application that organises notes and lists into notebooks. From 1.4.0 until 3.7.2, packages/renderer/MdToHtml/rules/katex.ts enables KaTeX's trust option for note content, allowing a note author to place a \href URL into rendered output without passing Joplin's normal URL allowlist. On Windows, clicking a link whose target is an attacker-controlled UNC path causes pathExists() to initiate SMB authentication and disclose the current user's NTLMv2 challenge-response without a warning. The unfiltered URL can also invoke other registered URL handlers, but the credential disclosure through KaTeX \href is the distinguishing demonstrated impact. This issue is fixed in version 3.7.2. | ||||
| CVE-2026-54160 | 1 Networkupstools | 1 Nut | 2026-09-28 | 8.2 High |
| Network UPS Tools is a collection of programs which provide a common interface for monitoring and administering UPS, PDU and SCD hardware. Prior to commits 658b24e and 1aa31d1, the GitHub Actions script used to prepare NUT tarballs and update GitHub Checks statuses and PR comments about it was mis-structured in terms of mixing code running with higher privileges (single-use token generated with write permissions) and untrusted inputs (PR source branch). A malicious PR run from a fork could extract the GITHUB_TOKEN value. It could potentially be abused while it was valid (while the GHA job ran) to manipulate Git repository contents, commit checks/statuses, or issue/PR comments, according to permissions it was issued with. This issue has been patched via commits 658b24e and 1aa31d1. | ||||
| CVE-2026-97498 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction mqd and fw objects are queue core objects which should remain valid and never be unmapped and evicted for user queues to work properly. During eviction if these buffers are evicted the hw continue to use the invalid addresses and caused page faults and system hung. | ||||
| CVE-2026-97478 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virt: acrn: Fix irqfd use-after-free during eventfd shutdown acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free the same struct hsm_irqfd: CPU0 CPU1 ---- ---- eventfd_release() wake_up_poll(EPOLLHUP) hsm_irqfd_wakeup() queue_work(&irqfd->shutdown) acrn_irqfd_deassign() hsm_irqfd_shutdown() list_del_init() eventfd_ctx_remove_wait_queue() eventfd_ctx_put() kfree(irqfd) hsm_irqfd_shutdown_work() container_of(work, ..., shutdown) irqfd->vm <-- use-after-free The deassign path freed the irqfd while a shutdown work item was already queued by EPOLLHUP (or vice versa), so the work item could resurrect a dangling pointer through container_of(). Switch to the lifetime model used by KVM irqfds: - Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds under irqfds_lock and queue the cleanup work. - hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the eventfd waitqueue entry, drops the eventfd reference and frees the irqfd. - A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit() ensures the cleanup work is queued at most once, no matter how many of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to call from the waitqueue callback, which runs with wqh->lock held and IRQs disabled and therefore cannot take irqfds_lock. - acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the eventfd is fully detached on return. acrn_irqfd_deinit() deactivates every irqfd, flushes the workqueue and only then destroys it, so no path can queue_work() onto a torn-down workqueue. - acrn_irqfd_assign() now installs the eventfd waitqueue entry and publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is never visible to deassign/deinit before its waitqueue entry is in place, and any EPOLLHUP that fires in the assign window queues cleanup work that blocks on irqfds_lock until publication is done. | ||||
| CVE-2026-98060 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject resilient lock operations in rbtree callbacks __bpf_rbtree_add() keeps parent and link pointers live across calls to the program-supplied comparison callback. The verifier therefore requires the root's lock to remain held throughout the callback. The helper path enforces this rule for bpf_spin_lock() and bpf_spin_unlock(), but the resilient lock kfunc argument path does not. Since resilient locks may protect BPF rbtree roots, a callback can release the root lock and let another CPU remove and free the node referenced by the in-progress tree walk. The walk then resumes using freed pointers. Reject resilient lock kfuncs in an rbtree comparison callback, matching the existing policy for the spin lock helpers. Resilient-lock-protected trees remain valid when their comparison callbacks leave lock state alone. | ||||
| CVE-2026-56735 | 1 Zammad | 1 Zammad | 2026-09-26 | N/A |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2 and 7.1.0, zammad's HTML sanitizer (HtmlSanitizer::Strict) blocks external URLs in to prevent remote content loading, but the srcset attribute, also allowlisted for , is not subject to the same check. This oversight allows an attacker to embed arbitrary external URLs in the srcset attribute just by sending an e-mail, effectively bypassing the external content protection. When an agent views the ticket containing the malicious srcset, the browser will silently load the attacker-controlled URL, resulting in the leakage of the agent's IP address, User-Agent, Referer, and the exact time the ticket was viewed. HtmlSanitizer::Strict got extended to block external URLs in the srcset attribute of tags. This was done to prevent tracking pixels and external content loading, which could compromise user privacy. This issue is fixed in versions 7.0.2 and 7.1.0. | ||||
| CVE-2026-93208 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kasan: fix cache shrink race with CPU hotplug kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on all online CPUs. Each callback moves objects belonging to the cache from cpu_quarantine to the CPU's shrink_qlist, where they can later be freed from task context. kmem_cache_destroy() invokes the quarantine removal path while holding cpus_read_lock(), but kmem_cache_shrink() does not. The latter can therefore race with CPU offlining as follows: kmem_cache_shrink() CPU hotplug ------------------- ----------- on_each_cpu() CPU1 moves objects to CPU1's shrink_qlist on_each_cpu() returns CPU1 goes offline kasan_cpu_offline() drains cpu_quarantine leaves shrink_qlist untouched for_each_online_cpu() skips CPU1 The objects left on CPU1's shrink_qlist are not returned to the slab allocator. This may prevent kmem_cache_shrink() from releasing slabs that would otherwise become empty. If CPU1 remains offline, a later kmem_cache_destroy() also skips the list and can report that the cache still contains objects. An intermittent occurrence was observed with a virtio-9p filesystem. The mount and umount commands both returned 0, but the kernel logged the following during the userspace-triggered teardown: [ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown() [ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376 [ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104 [ 2994.382591][ T111] p9_fcall_init+0x201/0x400 [ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700 [ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0 [ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50 [ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0 [ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360 [ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0 [ 2994.383910][ T111] vfs_statx+0xd7/0x170 [ 2994.384062][ T111] vfs_fstatat+0x45/0x80 [ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0 [ 2994.384386][ T111] do_syscall_64+0x115/0x6a0 [ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111 [ 2994.405655][ T111] Call Trace: [ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0 [ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0 [ 2994.407210][ T111] v9fs_session_close+0x3c/0x260 [ 2994.407409][ T111] v9fs_kill_super+0x48/0x90 [ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160 [ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0 Thus, a successful umount left objects in the 9p fcall cache and prevented the cache from being destroyed cleanly. Per-CPU shrink_qlist storage exists for every possible CPU, and each list is protected by its own raw spinlock. Iterate over possible CPUs so that a list populated before its CPU went offline is drained as well. for_each_possible_cpu() can do more work than for_each_online_cpu(), but this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is limited to cache shrink and cache destruction paths and does not affect the normal allocation/free fast path. It adds one raw-spinlock-protected scan of each possible CPU's shrink list. These lists are normally empty; a non-empty list is traversed to remove objects belonging to the cache being shrunk or destroyed. | ||||
| CVE-2026-97932 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Don't dereference trace_event_file in deferred trigger free The enable_event trigger defers trace_event_put_ref() to the trigger free kthread, but the trace_event_file can already be freed when the instance is removed. Keep the trace_event_call directly in enable_trigger_data so the deferred free does not access the freed trace_event_file. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-67281 | 1 Mikrotik | 1 Routeros | 2026-09-25 | 7.5 High |
| RouterOS WebFig contains an unauthenticated file-read vulnerability in the /jsproxy path where a newly allocated session retains a stale uninitialized principal pointer used for file authorization. An unauthenticated attacker can prepare the allocator so that the file-serving path dereferences this pointer with sufficient rights, then supply parent-directory components in an encrypted URI to escape the WebFig file namespace and disclose root-owned files, including configuration stores containing credentials.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) | ||||
| CVE-2026-97432 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix P2P-Device binding handling Our binding handling for P2P-Device can run into the following scenario, as observed by our testing: - a station interface is connected on some channel - the P2P-Device does a remain-on-channel (ROC) on that channel - the ROC ends, and the P2P-Device is removed from the binding, but the phy_ctxt pointer is left around as a PHY cache so we don't need to recalibrate to the channel again and again in case it's not shared - a binding update by the station interface, even a removal, will re-add the P2P-Device to the binding - the P2P-Device is removed, which removes the PHY context, but it's still in the binding so the firmware crashes Since the P2P device is removed from the binding and only re- added by unrelated code, but we want to keep the phy_ctxt around as a cache for future ROC usage, fix it by adding a boolean that indicates whether or not the P2P-Device should be added to the binding, and handle that in the binding iterator. That way, the station interface cannot re-add the P2P-Device to the binding when that isn't active. | ||||
| CVE-2026-15560 | 1 Redhat | 4 Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Els, Jboss Enterprise Application Platform Expansion Pack and 1 more | 2026-09-25 | 8.1 High |
| when EAP runs with -secmgr, the openjdk-orb's JDKBridge honours attacker-supplied CDR codebase URLs during object unmarshalling on :3528, allowing an unauthenticated attacker to load and instantiate arbitrary classes from a remote URL in the server JVM before EJB security interceptors run. | ||||
| CVE-2026-93262 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5-ppl: fix use-after-free in ppl_do_flush() The loop in ppl_do_flush() continues iterating after calling ppl_io_unit_finished(), touching io->pending_flushes and leading to a use-after-free. Add a break statement to stop the loop once io is freed. | ||||
| CVE-2026-58006 | 1 Altera | 1 Trusted Firmware | 2026-09-25 | 8.1 High |
| Untrusted pointer dereference vulnerability in Altera Trusted Firmware on HPS allows Exploitation of Improperly Configured or Implemented Memory Protections. This issue affects Trusted Firmware: through socfpga_v2.14.0. | ||||
| CVE-2026-93279 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown The TX cleanup tasklet can be scheduled by the watchdog IRQ handler to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in the queue which might run after the cvm_oct_remove() frees net_device structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it iterates cvm_oct_device[] which is an array of netdevice pointers. Add tasklet_kill() after free_irq() to ensure the tasklet is no longer scheduled or running before teardown proceeds. | ||||
| CVE-2026-93277 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Validate udata before executing commands The destroy callbacks currently zero the udata output after tearing down driver resources. If the userspace access fails, uverbs preserves the uobject and allows the destroy callback to run again, even though the driver resource has already been freed. Call ib_no_udata_io() before teardown so udata failures are detected while the resource is still intact, then return success after teardown completes. As part of this change, move ib_respond_empty_udata() to the start of the create and modify flows. While this is not strictly required for general create flows, as the core layer unwinds uobjects on failure, it is necessary for create AH. In _rdma_create_ah(), the HW object is otherwise leaked. | ||||
| CVE-2026-58007 | 1 Altera | 1 Trusted Firmware | 2026-09-25 | 8.1 High |
| Untrusted pointer dereference vulnerability in Altera Trusted Firmware on HPS allows Exploitation of Improperly Configured or Implemented Memory Protections. This issue affects Trusted Firmware: through socfpga_v2.14.0. | ||||
| CVE-2026-54918 | 1 Netbox-community | 1 Devicetype-library | 2026-09-24 | 5.3 Medium |
| NetBox Device Type Library is a collection of community-sourced device type definitions for import into NetBox. In the affected repository revisions, NETBOX_DT_LIBRARY_URL in tests/test_configuration.py is a free-form tracked constant that an unauthenticated pull-request author can change before the validation test harness runs. During pytest collection, tests/definitions_test.py passes the value to Repo.clone_from and create_remote("upstream").fetch(), causing blind Git smart-HTTP requests to an attacker-selected host or loading attacker-controlled tests/known-*.json validation caches. The blind request cannot set arbitrary metadata-service headers or return response bodies, and this path does not execute remote Git hooks, but substituted known data can bypass slug, module, and rack uniqueness validation. This vulnerability is fixed in commit 8980c690097e92f5028c7e6df402b327d827ecd5. | ||||
| CVE-2026-95985 | 1 Amazon | 1 Kiro Ide | 2026-09-24 | 8.8 High |
| The file write tool in Amazon Kiro IDE versions before 1.0.242 might allow remote unauthenticated actors to inject crafted instructions into the agent's context. When a user runs the agent in a crafted repository as an untrusted workspace, sending any message can cause agent modifications to auto-loaded global configuration paths. We recommend you upgrade to Kiro IDE version 1.0.242 or later. Users who ran the agent in an untrusted workspace on an earlier version should also review the global Kiro configuration directory (~/.kiro) for entries they did not create. | ||||