Export limit exceeded: 413143 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15774 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-50095 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Improve handling of timed out WRs of mad agent Current timeout handler of mad agent acquires/releases mad_agent_priv lock for every timed out WRs. This causes heavy locking contention when higher no. of WRs are to be handled inside timeout handler. This leads to softlockup with below trace in some use cases where rdma-cm path is used to establish connection between peer nodes Trace: ----- BUG: soft lockup - CPU#4 stuck for 26s! [kworker/u128:3:19767] CPU: 4 PID: 19767 Comm: kworker/u128:3 Kdump: loaded Tainted: G OE ------- --- 5.14.0-427.13.1.el9_4.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.4.8 11/26/2019 Workqueue: ib_mad1 timeout_sends [ib_core] RIP: 0010:__do_softirq+0x78/0x2ac RSP: 0018:ffffb253449e4f98 EFLAGS: 00000246 RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 000000000000001f RDX: 000000000000001d RSI: 000000003d1879ab RDI: fff363b66fd3a86b RBP: ffffb253604cbcd8 R08: 0000009065635f3b R09: 0000000000000000 R10: 0000000000000040 R11: ffffb253449e4ff8 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff8caa1fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd9ec9db900 CR3: 0000000891934006 CR4: 00000000007706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? __irq_exit_rcu+0xa1/0xc0 ? watchdog_timer_fn+0x1b2/0x210 ? __pfx_watchdog_timer_fn+0x10/0x10 ? __hrtimer_run_queues+0x127/0x2c0 ? hrtimer_interrupt+0xfc/0x210 ? __sysvec_apic_timer_interrupt+0x5c/0x110 ? sysvec_apic_timer_interrupt+0x37/0x90 ? asm_sysvec_apic_timer_interrupt+0x16/0x20 ? __do_softirq+0x78/0x2ac ? __do_softirq+0x60/0x2ac __irq_exit_rcu+0xa1/0xc0 sysvec_call_function_single+0x72/0x90 </IRQ> <TASK> asm_sysvec_call_function_single+0x16/0x20 RIP: 0010:_raw_spin_unlock_irq+0x14/0x30 RSP: 0018:ffffb253604cbd88 EFLAGS: 00000247 RAX: 000000000001960d RBX: 0000000000000002 RCX: ffff8cad2a064800 RDX: 000000008020001b RSI: 0000000000000001 RDI: ffff8cad5d39f66c RBP: ffff8cad5d39f600 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8caa443e0c00 R11: ffffb253604cbcd8 R12: ffff8cacb8682538 R13: 0000000000000005 R14: ffffb253604cbd90 R15: ffff8cad5d39f66c cm_process_send_error+0x122/0x1d0 [ib_cm] timeout_sends+0x1dd/0x270 [ib_core] process_one_work+0x1e2/0x3b0 ? __pfx_worker_thread+0x10/0x10 worker_thread+0x50/0x3a0 ? __pfx_worker_thread+0x10/0x10 kthread+0xdd/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> Simplified timeout handler by creating local list of timed out WRs and invoke send handler post creating the list. The new method acquires/ releases lock once to fetch the list and hence helps to reduce locking contetiong when processing higher no. of WRs | ||||
| CVE-2024-49932 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't readahead the relocation inode on RST On relocation we're doing readahead on the relocation inode, but if the filesystem is backed by a RAID stripe tree we can get ENOENT (e.g. due to preallocated extents not being mapped in the RST) from the lookup. But readahead doesn't handle the error and submits invalid reads to the device, causing an assertion in the scatter-gather list code: BTRFS info (device nvme1n1): balance: start -d -m -s BTRFS info (device nvme1n1): relocating block group 6480920576 flags data|raid0 BTRFS error (device nvme1n1): cannot find raid-stripe for logical [6481928192, 6481969152] devid 2, profile raid0 ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:115! Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1012 Comm: btrfs Not tainted 6.10.0-rc7+ #567 RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002cd11000 CR3: 00000001109ea001 CR4: 0000000000370eb0 Call Trace: <TASK> ? __die_body.cold+0x14/0x25 ? die+0x2e/0x50 ? do_trap+0xca/0x110 ? do_error_trap+0x65/0x80 ? __blk_rq_map_sg+0x339/0x4a0 ? exc_invalid_op+0x50/0x70 ? __blk_rq_map_sg+0x339/0x4a0 ? asm_exc_invalid_op+0x1a/0x20 ? __blk_rq_map_sg+0x339/0x4a0 nvme_prep_rq.part.0+0x9d/0x770 nvme_queue_rq+0x7d/0x1e0 __blk_mq_issue_directly+0x2a/0x90 ? blk_mq_get_budget_and_tag+0x61/0x90 blk_mq_try_issue_list_directly+0x56/0xf0 blk_mq_flush_plug_list.part.0+0x52b/0x5d0 __blk_flush_plug+0xc6/0x110 blk_finish_plug+0x28/0x40 read_pages+0x160/0x1c0 page_cache_ra_unbounded+0x109/0x180 relocate_file_extent_cluster+0x611/0x6a0 ? btrfs_search_slot+0xba4/0xd20 ? balance_dirty_pages_ratelimited_flags+0x26/0xb00 relocate_data_extent.constprop.0+0x134/0x160 relocate_block_group+0x3f2/0x500 btrfs_relocate_block_group+0x250/0x430 btrfs_relocate_chunk+0x3f/0x130 btrfs_balance+0x71b/0xef0 ? kmalloc_trace_noprof+0x13b/0x280 btrfs_ioctl+0x2c2e/0x3030 ? kvfree_call_rcu+0x1e6/0x340 ? list_lru_add_obj+0x66/0x80 ? mntput_no_expire+0x3a/0x220 __x64_sys_ioctl+0x96/0xc0 do_syscall_64+0x54/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fcc04514f9b Code: Unable to access opcode bytes at 0x7fcc04514f71. RSP: 002b:00007ffeba923370 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fcc04514f9b RDX: 00007ffeba923460 RSI: 00000000c4009420 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000013 R09: 0000000000000001 R10: 00007fcc043fbba8 R11: 0000000000000246 R12: 00007ffeba924fc5 R13: 00007ffeba923460 R14: 0000000000000002 R15: 00000000004d4bb0 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:__blk_rq_map_sg+0x339/0x4a0 RSP: 0018:ffffc90001a43820 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffea00045d4802 RDX: 0000000117520000 RSI: 0000000000000000 RDI: ffff8881027d1000 RBP: 0000000000003000 R08: ffffea00045d4902 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000001000 R12: ffff8881003d10b8 R13: ffffc90001a438f0 R14: 0000000000000000 R15: 0000000000003000 FS: 00007fcc048a6900(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcc04514f71 CR3: 00000001109ea001 CR4: 0000000000370eb0 Kernel p ---truncated--- | ||||
| CVE-2024-47703 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, lsm: Add check for BPF LSM return value A bpf prog returning a positive number attached to file_alloc_security hook makes kernel panic. This happens because file system can not filter out the positive number returned by the LSM prog using IS_ERR, and misinterprets this positive number as a file pointer. Given that hook file_alloc_security never returned positive number before the introduction of BPF LSM, and other BPF LSM hooks may encounter similar issues, this patch adds LSM return value check in verifier, to ensure no unexpected value is returned. | ||||
| CVE-2024-46866 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: add missing bo locking in show_meminfo() bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) | ||||
| CVE-2024-46751 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't BUG_ON() when 0 reference count at btrfs_lookup_extent_info() Instead of doing a BUG_ON() handle the error by returning -EUCLEAN, aborting the transaction and logging an error message. | ||||
| CVE-2024-46750 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Add missing bridge lock to pci_bus_lock() One of the true positives that the cfg_access_lock lockdep effort identified is this sequence: WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70 RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70 Call Trace: <TASK> ? __warn+0x8c/0x190 ? pci_bridge_secondary_bus_reset+0x5d/0x70 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? pci_bridge_secondary_bus_reset+0x5d/0x70 pci_reset_bus+0x1d8/0x270 vmd_probe+0x778/0xa10 pci_device_probe+0x95/0x120 Where pci_reset_bus() users are triggering unlocked secondary bus resets. Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses pci_bus_lock() before issuing the reset which locks everything *but* the bridge itself. For the same motivation as adding: bridge = pci_upstream_bridge(dev); if (bridge) pci_dev_lock(bridge); to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add pci_dev_lock() for @bus->self to pci_bus_lock(). [bhelgaas: squash in recursive locking deadlock fix from Keith Busch: https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com] | ||||
| CVE-2024-44950 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: sc16is7xx: fix invalid FIFO access with special register set When enabling access to the special register set, Receiver time-out and RHR interrupts can happen. In this case, the IRQ handler will try to read from the FIFO thru the RHR register at address 0x00, but address 0x00 is mapped to DLL register, resulting in erroneous FIFO reading. Call graph example: sc16is7xx_startup(): entry sc16is7xx_ms_proc(): entry sc16is7xx_set_termios(): entry sc16is7xx_set_baud(): DLH/DLL = $009C --> access special register set sc16is7xx_port_irq() entry --> IIR is 0x0C sc16is7xx_handle_rx() entry sc16is7xx_fifo_read(): --> unable to access FIFO (RHR) because it is mapped to DLL (LCR=LCR_CONF_MODE_A) sc16is7xx_set_baud(): exit --> Restore access to general register set Fix the problem by claiming the efr_lock mutex when accessing the Special register set. | ||||
| CVE-2024-43872 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix soft lockup under heavy CEQE load CEQEs are handled in interrupt handler currently. This may cause the CPU core staying in interrupt context too long and lead to soft lockup under heavy load. Handle CEQEs in BH workqueue and set an upper limit for the number of CEQE handled by a single call of work handler. | ||||
| CVE-2024-43840 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls __bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them the struct bpf_tramp_image *im pointer as an argument in R0. The trampoline generation code uses emit_addr_mov_i64() to emit instructions for moving the bpf_tramp_image address into R0, but emit_addr_mov_i64() assumes the address to be in the vmalloc() space and uses only 48 bits. Because bpf_tramp_image is allocated using kzalloc(), its address can use more than 48-bits, in this case the trampoline will pass an invalid address to __bpf_tramp_enter/exit() causing a kernel crash. Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64() as it can work with addresses that are greater than 48-bits. | ||||
| CVE-2024-43832 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/uv: Don't call folio_wait_writeback() without a folio reference folio_wait_writeback() requires that no spinlocks are held and that a folio reference is held, as documented. After we dropped the PTL, the folio could get freed concurrently. So grab a temporary reference. | ||||
| CVE-2024-42103 | 1 Linux | 2 Linux, Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix adding block group to a reclaim list and the unused list during reclaim There is a potential parallel list adding for retrying in btrfs_reclaim_bgs_work and adding to the unused list. Since the block group is removed from the reclaim list and it is on a relocation work, it can be added into the unused list in parallel. When that happens, adding it to the reclaim list will corrupt the list head and trigger list corruption like below. Fix it by taking fs_info->unused_bgs_lock. [177.504][T2585409] BTRFS error (device nullb1): error relocating ch= unk 2415919104 [177.514][T2585409] list_del corruption. next->prev should be ff1100= 0344b119c0, but was ff11000377e87c70. (next=3Dff110002390cd9c0) [177.529][T2585409] ------------[ cut here ]------------ [177.537][T2585409] kernel BUG at lib/list_debug.c:65! [177.545][T2585409] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [177.555][T2585409] CPU: 9 PID: 2585409 Comm: kworker/u128:2 Tainted: G W 6.10.0-rc5-kts #1 [177.568][T2585409] Hardware name: Supermicro SYS-520P-WTR/X12SPW-TF, BIOS 1.2 02/14/2022 [177.579][T2585409] Workqueue: events_unbound btrfs_reclaim_bgs_work[btrfs] [177.589][T2585409] RIP: 0010:__list_del_entry_valid_or_report.cold+0x70/0x72 [177.624][T2585409] RSP: 0018:ff11000377e87a70 EFLAGS: 00010286 [177.633][T2585409] RAX: 000000000000006d RBX: ff11000344b119c0 RCX:0000000000000000 [177.644][T2585409] RDX: 000000000000006d RSI: 0000000000000008 RDI:ffe21c006efd0f40 [177.655][T2585409] RBP: ff110002e0509f78 R08: 0000000000000001 R09:ffe21c006efd0f08 [177.665][T2585409] R10: ff11000377e87847 R11: 0000000000000000 R12:ff110002390cd9c0 [177.676][T2585409] R13: ff11000344b119c0 R14: ff110002e0508000 R15:dffffc0000000000 [177.687][T2585409] FS: 0000000000000000(0000) GS:ff11000fec880000(0000) knlGS:0000000000000000 [177.700][T2585409] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [177.709][T2585409] CR2: 00007f06bc7b1978 CR3: 0000001021e86005 CR4:0000000000771ef0 [177.720][T2585409] DR0: 0000000000000000 DR1: 0000000000000000 DR2:0000000000000000 [177.731][T2585409] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:0000000000000400 [177.742][T2585409] PKRU: 55555554 [177.748][T2585409] Call Trace: [177.753][T2585409] <TASK> [177.759][T2585409] ? __die_body.cold+0x19/0x27 [177.766][T2585409] ? die+0x2e/0x50 [177.772][T2585409] ? do_trap+0x1ea/0x2d0 [177.779][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.788][T2585409] ? do_error_trap+0xa3/0x160 [177.795][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.805][T2585409] ? handle_invalid_op+0x2c/0x40 [177.812][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.820][T2585409] ? exc_invalid_op+0x2d/0x40 [177.827][T2585409] ? asm_exc_invalid_op+0x1a/0x20 [177.834][T2585409] ? __list_del_entry_valid_or_report.cold+0x70/0x72 [177.843][T2585409] btrfs_delete_unused_bgs+0x3d9/0x14c0 [btrfs] There is a similar retry_list code in btrfs_delete_unused_bgs(), but it is safe, AFAICS. Since the block group was in the unused list, the used bytes should be 0 when it was added to the unused list. Then, it checks block_group->{used,reserved,pinned} are still 0 under the block_group->lock. So, they should be still eligible for the unused list, not the reclaim list. The reason it is safe there it's because because we're holding space_info->groups_sem in write mode. That means no other task can allocate from the block group, so while we are at deleted_unused_bgs() it's not possible for other tasks to allocate and deallocate extents from the block group, so it can't be added to the unused list or the reclaim list by anyone else. The bug can be reproduced by btrfs/166 after a few rounds. In practice this can be hit when relocation cannot find more chunk space and ends with ENOSPC. | ||||
| CVE-2024-40980 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: replace spin_lock by raw_spin_lock trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. | ||||
| CVE-2024-39468 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix deadlock in smb2_find_smb_tcon() Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such deadlock. | ||||
| CVE-2024-38558 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix overwriting ct original tuple for ICMPv6 OVS_PACKET_CMD_EXECUTE has 3 main attributes: - OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format. - OVS_PACKET_ATTR_PACKET - Binary packet content. - OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet. OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure with the metadata like conntrack state, input port, recirculation id, etc. Then the packet itself gets parsed to populate the rest of the keys from the packet headers. Whenever the packet parsing code starts parsing the ICMPv6 header, it first zeroes out fields in the key corresponding to Neighbor Discovery information even if it is not an ND packet. It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares the space between 'nd' and 'ct_orig' that holds the original tuple conntrack metadata parsed from the OVS_PACKET_ATTR_KEY. ND packets should not normally have conntrack state, so it's fine to share the space, but normal ICMPv6 Echo packets or maybe other types of ICMPv6 can have the state attached and it should not be overwritten. The issue results in all but the last 4 bytes of the destination address being wiped from the original conntrack tuple leading to incorrect packet matching and potentially executing wrong actions in case this packet recirculates within the datapath or goes back to userspace. ND fields should not be accessed in non-ND packets, so not clearing them should be fine. Executing memset() only for actual ND packets to avoid the issue. Initializing the whole thing before parsing is needed because ND packet may not contain all the options. The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't affect packets entering OVS datapath from network interfaces, because in this case CT metadata is populated from skb after the packet is already parsed. | ||||
| CVE-2024-36286 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: acquire rcu_read_lock() in instance_destroy_rcu() syzbot reported that nf_reinject() could be called without rcu_read_lock() : WARNING: suspicious RCU usage 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Not tainted net/netfilter/nfnetlink_queue.c:263 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syz-executor.4/13427: #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:329 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_do_batch kernel/rcu/tree.c:2190 [inline] #0: ffffffff8e334f60 (rcu_callback){....}-{0:0}, at: rcu_core+0xa86/0x1830 kernel/rcu/tree.c:2471 #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:356 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: nfqnl_flush net/netfilter/nfnetlink_queue.c:405 [inline] #1: ffff88801ca92958 (&inst->lock){+.-.}-{2:2}, at: instance_destroy_rcu+0x30/0x220 net/netfilter/nfnetlink_queue.c:172 stack backtrace: CPU: 0 PID: 13427 Comm: syz-executor.4 Not tainted 6.9.0-rc7-syzkaller-02060-g5c1672705a1a #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 lockdep_rcu_suspicious+0x221/0x340 kernel/locking/lockdep.c:6712 nf_reinject net/netfilter/nfnetlink_queue.c:323 [inline] nfqnl_reinject+0x6ec/0x1120 net/netfilter/nfnetlink_queue.c:397 nfqnl_flush net/netfilter/nfnetlink_queue.c:410 [inline] instance_destroy_rcu+0x1ae/0x220 net/netfilter/nfnetlink_queue.c:172 rcu_do_batch kernel/rcu/tree.c:2196 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2471 handle_softirqs+0x2d6/0x990 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 </IRQ> <TASK> | ||||
| CVE-2024-36032 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching fw build id Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. | ||||
| CVE-2024-35999 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb3: missing lock when picking channel Coverity spotted a place where we should have been holding the channel lock when accessing the ses channel index. Addresses-Coverity: 1582039 ("Data race condition (MISSING_LOCK)") | ||||
| CVE-2024-35998 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb3: fix lock ordering potential deadlock in cifs_sync_mid_result Coverity spotted that the cifs_sync_mid_result function could deadlock "Thread deadlock (ORDER_REVERSAL) lock_order: Calling spin_lock acquires lock TCP_Server_Info.srv_lock while holding lock TCP_Server_Info.mid_lock" Addresses-Coverity: 1590401 ("Thread deadlock (ORDER_REVERSAL)") | ||||
| CVE-2024-35990 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma: xilinx_dpdma: Fix locking There are several places where either chan->lock or chan->vchan.lock was not held. Add appropriate locking. This fixes lockdep warnings like [ 31.077578] ------------[ cut here ]------------ [ 31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.077953] Modules linked in: [ 31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98 [ 31.078102] Hardware name: xlnx,zynqmp (DT) [ 31.078169] Workqueue: events_unbound deferred_probe_work_func [ 31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0 [ 31.078550] sp : ffffffc083bb2e10 [ 31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168 [ 31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480 [ 31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000 [ 31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000 [ 31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001 [ 31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def [ 31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516 [ 31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff [ 31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000 [ 31.080307] Call trace: [ 31.080340] xilinx_dpdma_chan_queue_transfer+0x274/0x5e0 [ 31.080518] xilinx_dpdma_issue_pending+0x11c/0x120 [ 31.080595] zynqmp_disp_layer_update+0x180/0x3ac [ 31.080712] zynqmp_dpsub_plane_atomic_update+0x11c/0x21c [ 31.080825] drm_atomic_helper_commit_planes+0x20c/0x684 [ 31.080951] drm_atomic_helper_commit_tail+0x5c/0xb0 [ 31.081139] commit_tail+0x234/0x294 [ 31.081246] drm_atomic_helper_commit+0x1f8/0x210 [ 31.081363] drm_atomic_commit+0x100/0x140 [ 31.081477] drm_client_modeset_commit_atomic+0x318/0x384 [ 31.081634] drm_client_modeset_commit_locked+0x8c/0x24c [ 31.081725] drm_client_modeset_commit+0x34/0x5c [ 31.081812] __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168 [ 31.081899] drm_fb_helper_set_par+0x50/0x70 [ 31.081971] fbcon_init+0x538/0xc48 [ 31.082047] visual_init+0x16c/0x23c [ 31.082207] do_bind_con_driver.isra.0+0x2d0/0x634 [ 31.082320] do_take_over_console+0x24c/0x33c [ 31.082429] do_fbcon_takeover+0xbc/0x1b0 [ 31.082503] fbcon_fb_registered+0x2d0/0x34c [ 31.082663] register_framebuffer+0x27c/0x38c [ 31.082767] __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c [ 31.082939] drm_fb_helper_initial_config+0x50/0x74 [ 31.083012] drm_fbdev_dma_client_hotplug+0xb8/0x108 [ 31.083115] drm_client_register+0xa0/0xf4 [ 31.083195] drm_fbdev_dma_setup+0xb0/0x1cc [ 31.083293] zynqmp_dpsub_drm_init+0x45c/0x4e0 [ 31.083431] zynqmp_dpsub_probe+0x444/0x5e0 [ 31.083616] platform_probe+0x8c/0x13c [ 31.083713] really_probe+0x258/0x59c [ 31.083793] __driver_probe_device+0xc4/0x224 [ 31.083878] driver_probe_device+0x70/0x1c0 [ 31.083961] __device_attach_driver+0x108/0x1e0 [ 31.084052] bus_for_each_drv+0x9c/0x100 [ 31.084125] __device_attach+0x100/0x298 [ 31.084207] device_initial_probe+0x14/0x20 [ 31.084292] bus_probe_device+0xd8/0xdc [ 31.084368] deferred_probe_work_func+0x11c/0x180 [ 31.084451] process_one_work+0x3ac/0x988 [ 31.084643] worker_thread+0x398/0x694 [ 31.084752] kthread+0x1bc/0x1c0 [ 31.084848] ret_from_fork+0x10/0x20 [ 31.084932] irq event stamp: 64549 [ 31.084970] hardirqs last enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90 [ 31.085157] ---truncated--- | ||||
| CVE-2024-35971 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Handle softirqs at the end of IRQ thread to fix hang The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. | ||||