| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: zero-initialize tc skb extension on allocation
Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:
[ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28
[ 778.301495] load of value 107 is not a valid value for type '_Bool'
[ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2
[ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 778.307901] Call Trace:
[ 778.308680] <IRQ>
[ 778.309358] dump_stack+0xbb/0x107
[ 778.310307] ubsan_epilogue+0x5/0x40
[ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48
[ 778.312454] ? memset+0x20/0x40
[ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch]
[ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch]
[ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch]
[ 778.317188] ? create_prof_cpu_mask+0x20/0x20
[ 778.318220] ? arch_stack_walk+0x82/0xf0
[ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb
[ 778.320399] ? stack_trace_save+0x91/0xc0
[ 778.321362] ? stack_trace_consume_entry+0x160/0x160
[ 778.322517] ? lock_release+0x52e/0x760
[ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch]
[ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch]
[ 778.325950] __netif_receive_skb_core+0x771/0x2db0
[ 778.327067] ? lock_downgrade+0x6e0/0x6f0
[ 778.328021] ? lock_acquire+0x565/0x720
[ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0
[ 778.329902] ? inet_gro_receive+0x2a7/0x10a0
[ 778.330914] ? lock_downgrade+0x6f0/0x6f0
[ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0
[ 778.332876] ? lock_release+0x52e/0x760
[ 778.333808] ? dev_gro_receive+0xcc8/0x2380
[ 778.334810] ? lock_downgrade+0x6f0/0x6f0
[ 778.335769] __netif_receive_skb_list_core+0x295/0x820
[ 778.336955] ? process_backlog+0x780/0x780
[ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core]
[ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0
[ 778.341033] ? kvm_clock_get_cycles+0x14/0x20
[ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0
[ 778.343288] ? __kasan_kmalloc+0x7a/0x90
[ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core]
[ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core]
[ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820
[ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core]
[ 778.349688] ? napi_gro_flush+0x26c/0x3c0
[ 778.350641] napi_complete_done+0x188/0x6b0
[ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core]
[ 778.352853] __napi_poll+0x9f/0x510
[ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core]
[ 778.355158] net_rx_action+0x34c/0xa40
[ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0
[ 778.357083] ? sched_clock_cpu+0x18/0x190
[ 778.358041] ? __common_interrupt+0x8e/0x1a0
[ 778.359045] __do_softirq+0x1ce/0x984
[ 778.359938] __irq_exit_rcu+0x137/0x1d0
[ 778.360865] irq_exit_rcu+0xa/0x20
[ 778.361708] common_interrupt+0x80/0xa0
[ 778.362640] </IRQ>
[ 778.363212] asm_common_interrupt+0x1e/0x40
[ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10
[ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00
[ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246
[ 778.370570] RAX
---truncated--- |
| A vulnerability in the Xerte Online Tools allows for RCE through the antivirus binary path in the tools server settings, which can be changed to a PHP interpreter, allowing an attacker to upload PHP data that will then be executed. |
| The Kirki WordPress plugin before 6.0.12 does not validate a user-supplied URL before requesting it server-side, allowing unauthenticated attackers to make the site issue HTTP requests to arbitrary hosts (Server-Side Request Forgery). |
| Printers and Multifunction Printers (MFPs) provided by Ricoh Company, Ltd. do not implement restrictions on SSH port forwarding, allowing to connect to arbitrary destinations. When SSH is enabled on an affected product, SSH port forwarding may be leveraged to connect to other node on the LAN. |
| Improper output neutralization (XML injection) in QDom comment, CDATA, and processing-instruction serialization in Qt XML from 4.0.0 through 6.11 allows untrusted text serialized by an application into those nodes to inject arbitrary XML markup, because the node terminators are not escaped under the default InvalidDataPolicy (AcceptInvalidChars). Fixed in Qt 6.12. |
| Improper control of generation of code ('Code Injection') in the schedule feature in Devolutions PowerShell Universal 2026.2.2 and earlier allows an authenticated user with schedule creation permission to execute arbitrary PowerShell code via crafted schedule parameter names concatenated into a script invocation. |
| A vulnerability was identified in textPlus Text Message and Call App up to 8.3.5 on Android. This impacts the function DialerActivity of the component com.gogii.textplus. Such manipulation leads to improper export of android application components. The attack needs to be performed locally. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| Improper restriction of intended endpoints in the RabbitMQ broker connection tools of the Amazon MQ MCP Server (awslabs.amazon-mq-mcp-server) before 2.0.24 may allow a remote unauthenticated actor (via prompt injection) to obtain Amazon MQ for RabbitMQ broker credentials or OAuth access tokens sent to a crafted endpoint controlled through a broker hostname introduced in the MCP client context.
To remediate this issue, users should upgrade to version 2.0.24. |
| The Payment forms, Buy now buttons, and Invoicing System | GetPaid plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 2.8.56 via the getpaid_payment_form_element function. This makes it possible for authenticated attackers, with administrator-level access and above, to include and execute arbitrary .php files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where .php file types can be uploaded and included. |
| The Kali Forms — Contact Form & Drag-and-Drop Builder plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.4.20 via the _save_data function. This is due to insufficient validation of the 'thisPermalink' field value before it overwrites a trusted callable placeholder, allowing attacker-controlled strings to reach call_user_func() in _save_data(). This makes it possible for unauthenticated attackers to execute code on the server. Exploitation requires the target form to define a field with a name matching one of the reserved placeholder keys ('thisPermalink', 'entryCounter', or 'submission_link'), as check_if_placeholders_changed() only processes POST keys present in the form's field_type_map. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs_bnode_read() can return early without writing to the output buffer
when is_bnode_offset_valid() fails or when check_and_correct_requested_
length() corrects the length to zero. Callers such as hfs_bnode_read_
u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the
result unconditionally, leading to KMSAN uninit-value reports.
Rather than initializing at each individual call site, zero the buffer
at the start of hfs_bnode_read() before any validation checks. This
ensures all callers in both hfs and hfsplus get a deterministic zero
value regardless of which early-return path is taken. |
| Contao is an Open Source CMS. From 5.3.35 through 5.3.47 and from 5.7.0-RC1 through 5.7.8, the Feed Reader front-end module passes configured RSS feed URLs from FeedReaderController::getResponse() to feedIo->read() without scheme or private-address validation, allowing a backend user with module-edit permissions to make the server request internal network services, loopback addresses, or cloud metadata endpoints. In core-bundle/src/Controller/FrontendModule/FeedReaderController.php, the getResponse() function iterates over the configured feed URLs and passes each one directly to the HTTP client (via $this->feedIo->read($url, new Feed())) with no validation, while the DCA field definition for rss_feed in tl_module.php carries no URL scheme or host validation and the HTTP client is wired as @psr18.http_client (Symfony HttpClient) with no SSRF protection configured, since NoPrivateNetworkHttpClient is not used. This issue is fixed in versions 5.3.48. |
| Budibase before 3.38.1 contains a server-side request forgery vulnerability in the REST datasource integration that fails to validate HTTP redirects against the IP blacklist. Attackers with Builder role can configure a REST datasource pointing to an external server that returns a redirect to internal IP addresses, bypassing blacklist protection to access cloud metadata endpoints and internal services. |
| Grav CMS versions 2.0.7 through 2.0.10 fail to validate fully-qualified static method calls (Class::method) in blueprint dynamic-field directives because Blueprint::isSafeDynamicCall() only applies its dangerous-callable denylist to strings that do not contain '::'. An account with only page-editing rights (admin.pages, not super-admin or admin.pages_twig) can plant a directive in a page's form-field frontmatter that invokes an arbitrary public static PHP method with attacker-controlled arguments. Using built-in gadget methods this allows reading of any server-readable file (disclosed to anonymous visitors of the crafted page) and arbitrary creation/copying of files and directories under the web-server account. Fixed in 2.0.11. |
| undici does not validate the type property of a duck-typed blob-like request body before using it as the Content-Type header on the HTTP/1.1 dispatcher. In undici before 6.28.0, from 7.0.0 up to before 7.29.0, and from 8.0.0 up to before 8.9.0, an application that passes a hand-rolled blob-like body (via request, stream, pipeline, or dispatch) whose type is derived from untrusted input allows an attacker to inject CRLF sequences and append arbitrary HTTP headers, potentially smuggling a second request past the upstream. Native Blob objects are safe because their constructor strips CRLF from the type, and fetch is unaffected because it validates headers, but ecosystem libraries that build duck-typed blob shapes from user input can reach the vulnerable path. This is the same defect class as CVE-2022-35948 and CVE-2026-1527, on a header sink that the earlier fixes did not cover. The issue is fixed in undici 6.28.0, 7.29.0, and 8.9.0. |
| Insufficient policy enforcement in FileSystem in Google Chrome prior to 151.0.7922.72 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| CTI-Transmute is affected by a server-side request forgery vulnerability in the evaluation report PDF-generation functionality.
User-controlled CTI content, including conversion names, descriptions, and comments, is converted from Markdown to HTML and rendered as a PDF using WeasyPrint. Before the patch, the renderer used WeasyPrint’s default URL-fetching behavior without restricting the protocols or destinations that could be referenced by the generated HTML.
An attacker able to supply content included in an evaluation report could inject crafted resource references using schemes such as http://, https://, or file://. When the report was rendered, CTI-Transmute could fetch these resources using the application server’s network connectivity and filesystem privileges.
Successful exploitation could allow an attacker to:
* access services available only from the CTI-Transmute server or its internal network;
* probe internal hosts and service endpoints;
* retrieve local files readable by the application process; and
* expose fetched content through the generated PDF, depending on the referenced resource type and rendering context.
The vulnerability is corrected by providing WeasyPrint with a restrictive URL fetcher that permits only self-contained data: URIs. The externally hosted Google Fonts stylesheet was also removed so that PDF generation performs no intentional network or filesystem fetches. |
| An unauthenticated remote attacker can inject malicious input into the ModbusServer application because it does not validate the input it fetches from MQTT. This may lead to integrity and availability loss. |
| PIA's `POST /v1/upload/sbom` endpoint accepts a Bearer JWT and checks its **unverified** `iss` claim against an issuer allowlist using Python's `urlparse` before performing OIDC discovery with `requests`. Because `urlparse` and `requests`/`urllib3` parse an authority string containing a backslash (e.g. `https://attacker-host\@ci.eclipse.org/`) into *different* hostnames, an attacker can craft an issuer that passes the allowlist check yet drives `requests` — and subsequently `urllib.request.urlopen` for JWKS retrieval — to connect to an arbitrary attacker-chosen host, port, and scheme. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: wean fast IN from emulator_pio_in
Use __emulator_pio_in() directly for fast PIO instead of bouncing through
emulator_pio_in() now that __emulator_pio_in() fills "val" when handling
in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a
pure nop.
emulator_pio_in_emulated is now the last caller of emulator_pio_in.
No functional change intended. |
