| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper synchronization in the OpenVPN ovpn-dco-win for Windows versions 0.6.5 through 1.3.5 and 2.4.0 through 2.8.7 allows local attackers to trigger a deadlock via a crafted write to the ovpn-dco device, causing the host to become unresponsive. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix napi_disable deadlock when attempting to disable XSK pools
When disabling XSK pools, GVE calls the unlocked versions of
napi_disable and napi_enable. However, the netdev lock has already been
acquired before ndo_bpf is called because GVE supports queue management
ops. Calling the unlocked versions of napi_disable/enable results in a
deadlock when attempting to disable XSK pools, as the thread attempts to
re-acquire a lock it already holds.
Update the NAPI calls to use the locked versions.
This issue was found in production. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: reject net_iov in zerocopy receive mapping hints
After copying a readable prefix, receive_fallback_to_copy() asks
tcp_zerocopy_set_hint_for_skb() where page mapping can resume. If the
next skb is unreadable, find_next_mappable_frag() passes its net_iov
fragment to can_map_frag().
skb_frag_page() returns NULL for a net_iov, but can_map_frag()
dereferences it in PageCompound(). A v7.2 KASAN run on a connected TCP
socket with 64 readable bytes followed by a 4096-byte NET_IOV_DMABUF
fragment reported:
BUG: KASAN: null-ptr-deref in can_map_frag
tcp_zerocopy_receive -> can_map_frag
Kernel panic - not syncing: KASAN: panic_on_warn set
The diagnostic inserted the net_iov directly because the test host has
no devmem-capable NIC. Hardware end-to-end reachability remains untested
and requires CONFIG_NET_DEVMEM plus a supported DMA-buf-bound RX queue.
Reject all net_iov fragments before skb_frag_page(). This covers both
DMABUF and IOURING net_iov types while leaving page-backed checks
unchanged. With the guard, the same queue copied the readable prefix,
returned a 4096-byte skip hint, and completed without a fault. |
| IBM MQ could allow an authenticated attacker to cause a denial of service due to improper validation of offset values in MQOPEN requests. |
| Stack-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
When the driver is removed while the user space process that created
the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device
interface is removed twice and the kernel crashes.
The two paths are:
- wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P
device. nl80211_del_interface() holds RTNL and the wiphy mutex and
calls brcmf_p2p_del_vif(), which disables discovery and waits up to
1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(),
which unregisters the wdev and frees the vif and the ifp.
- brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives,
and calls brcmf_remove_interface(ifp, false) for the same ifp.
brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on
rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls
cfg80211_unregister_wdev() on the wdev that was already unregistered
and freed.
The second list_del_rcu() of wdev->list faults on LIST_POISON2:
brcmfmac: brcmf_p2p_del_vif delete P2P vif
brcmfmac: brcmf_p2p_deinit_discovery enter
brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared
brcmfmac: brcmf_detach Enter
brcmfmac: brcmf_bus_change_state 1 -> 0
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
[1.5 s later, brcmf_p2p_del_vif() timed out]
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
Unable to handle kernel paging request at virtual address dead000000000122
Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP
pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
Call trace:
_cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
cfg80211_unregister_wdev+0x10/0x1c [cfg80211]
brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac]
brcmf_remove_interface+0x1f4/0x254 [brcmfmac]
brcmf_detach+0x88/0x180 [brcmfmac]
brcmf_sdio_remove+0x90/0x7b0 [brcmfmac]
brcmf_sdiod_remove+0x20/0xa0 [brcmfmac]
brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac]
sdio_bus_remove+0x38/0x144
device_release_driver_internal+0x1e8/0x2c0
device_release_driver+0x14/0x20
brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac]
brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac]
__exit_compat+0x18/0x418 [brcmfmac_cyw]
__arm64_sys_delete_module+0x1ac/0x244
The log was taken with debug=0x406 on an i.MX 8M Plus board with a
CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of
brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same
in mainline.
To reproduce:
1. Start wpa_supplicant on wlan0 and let it associate. It creates the
P2P device (iw dev shows "type P2P-device").
2. Stop wpa_supplicant and remove the driver without waiting for
wpa_supplicant to exit:
kill $(pidof wpa_supplicant)
rmmod brcmfmac_cyw brcmfmac
The crash is reproducible on that board.
For the interface without a netdev (the P2P device), take RTNL and the
wiphy mutex in brcmf_detach() before reading iflist, and remove it with
locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the
slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev
any more. The interfaces with a netdev are removed as before, because
brcmf_del_if() takes RTNL on its own for the primary interface. |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to elevate privileges over a network. |
| Use after free in SQL Server allows an authorized attacker to elevate privileges locally. |
| Uncontrolled resource consumption in SQL Server allows an authorized attacker to deny service over a network. |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to elevate privileges locally. |
| Stack-based buffer overflow in SQL Server allows an unauthorized attacker to execute code over a network. |
| Out-of-bounds read in SQL Server allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in SQL Server allows an unauthorized attacker to disclose information over an adjacent network. |
| Heap-based buffer overflow in SQL Server allows an authorized attacker to elevate privileges locally. |
| Use of externally-controlled format string in SQL Server allows an authorized attacker to deny service over a network. |
| Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
| Numeric truncation error in Microsoft Office Word allows an unauthorized attacker to execute code over a network. |
