| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix swapped-out resources never leaving their bulk_move range
ttm_tt_swapout() returns the number of pages swapped out on success and
a negative error code on failure; for a populated ttm it never returns
zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU
walk on swapout failure") moved the bulk_move bookkeeping in
ttm_bo_swapout_cb() under "if (!ret)", so the
ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail()
pair is now skipped on every successful swapout. The equivalent change
for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink()
infinite LRU walk on backup failure") tests "lret > 0", which is what
was intended here as well.
Before b2ed01e7ad3d the resource was taken off the bulk_move before the
swapout; since then a swapped-out resource stays inside its BO's
bulk_move range (and on the manager LRU) although it is unevictable.
When it is later freed or the BO leaves the bulk_move
(ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()),
ttm_resource_del_bulk_move() skips it because of its
!ttm_resource_unevictable() guard, so a range endpoint in pos->first /
pos->last is left pointing at freed memory. The next
ttm_lru_bulk_move_tail() or ttm_resource_add_bulk_move() on that cursor
is a use-after-free, seen as the resv WARN in ttm_lru_bulk_move_add(),
"list_del corruption" in ttm_resource_move_to_lru_tail() or a NULL
dereference in ttm_resource_manager_next() -- minutes to hours after a
hibernation, or at process exit / reboot following one. Samuel
Ainsworth's analysis of drm/amd issue 5387 (see Link) identified the
dangling cursor; the missing removal at swapout time is the reason it
dangles.
Testing the condition for success restores the removal. On an AMD
Phoenix APU (ASUS UM3406GA, gfx1103) running suspend-then-hibernate on
a 7.0.y stable kernel carrying the backport (Ubuntu 7.0.0-31) the bug
crashed 5 of 18 hibernation cycles; a function profile of one
hibernation showed 336 ttm_tt_swapout() calls and zero
ttm_resource_del_bulk_move_unevictable() calls. With this change the
removal happens for every swapped-out resource and 12 further cycles
were clean. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
Probe failure and removal leave SDHCI child devices registered after the
parent clock and managed resources are released.
Unregister the OF children in reverse order before disabling the parent
clock on both paths. Use of_platform_device_destroy() because manual
child creation does not set the flag required by of_platform_depopulate().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Check write tracking in all address spaces
kvm_gfn_is_write_tracked() checks only the supplied memslot, but page
tracking is per-address-space and shadow pages are shared across all
address spaces. With SMM, a GFN can therefore be write-tracked in one
address space and appear untracked through the other.
Check the supplied slot first, then the slot for the other address space.
This ensures all callers honor write tracking regardless of the active
address space. In particular, it prevents mmu_try_to_unsync_pages() from
marking an upper-level shadow page unsync and eventually triggering the
BUG in pte_list_remove().
[invert direction of the conditional. - Paolo] |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: Avoid iteration of dying tasks with zero refcount
The commit 260fbcb92bbea ("cgroup: Move dying_tasks cleanup from
cgroup_task_release() to cgroup_task_free()") extended the lifetime of
tasks on the dying_tasks list.
The iterators have provision to go through dying_tasks because of
dying threadgroup leaders or explicit CSS_TASK_ITER_WITH_DEAD, however,
it was expected that such tasks can obtain a new reference (that is
possible before cgroup_task_release()/put_task_struct_rcu_user()).
The tasks after cgroup_task_release() and before cgroup_task_free()
are subject to race when they may or may not have ->usage count > 0.
The race window is between css_task_iter_next() invocations
when css_set_lock is released and we may arrive at a new ->task_pos.
The iterator should not attempt to resurrect tasks whose ->usage count
dropped to zero. (When that happens, __put_task_struct_rcu_cb() is
already imminent and the returned task_struct would could be used
after free.)
As for the fix, we cannot simply check the signal->live count of a task
on the dying list because that won't distinguish regular zombies waiting
to be reaped from RCU remnant tasks that are going to be free'd.
Therefore add an extra check to rule out ->usage==0 tasks from any
iteration.
The repeat: loop in css_task_iter_advance() doesn't consider ->usage
count, so add a new loop to css_task_iter_next() to skip de-used tasks
on the dying_list.
Rough illustration of the possible race
R (reader of cgroup.procs) T (thread) L (group leader)
--------------------------------- -------------------------------- --------------------------------
L exits, signal->live > 0
cgroup_task_dead(L)
css_set_skip_task_iters() // skips only cset->tasks
list_add_tail(&L->cg_list, &cset->dying_tasks)
css_task_iter_next()
take css_set_lock
css_task_iter_advance()
leader && signal->live != 0
=> it->task_pos = &L->cg_list
release css_set_lock
T exits
--signal->live == 0
cgroup_task_dead(T) // css_set_lock
release_task(T)
cgroup_task_release(T)
release_task(L) // zap_leader
cgroup_task_release(L)
put_task_struct_rcu_user(L)
...RCU...
put_task_struct(L)
L->usage = 0
/* L still on dying_tasks */
...RCU...
__put_task_struct(L)
css_task_iter_next() // another iteration
take css_set_lock
it->task_pos = &L->cg_list
get_task_struct(L)
=> addition on 0
drop css_set_lock
cgroup_task_free(L)
css_set_skip_task_iters() // dying skip comes too late
free_task(L)
cgroup_procs_show()
task_pid_vnr(L) |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix NULL sched deref in kfunc sub-sched error paths
When the root scheduler has sub-scheds attached, the COMPAT kfunc
wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse
the call and report to @p's scheduler:
scx_error(scx_task_sched(p), "... must be used");
The wrappers are reachable with tasks that have no scheduler.
scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which
scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs;
scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which
ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the
group has no kf_tasks validation, and scx_dsq_insert_preamble() checks
task ownership with scx_task_on_sched() precisely because @p may be an
arbitrary task.
scx_task_sched(p) is p->scx.sched, which is NULL for tasks past
sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on
exit -- and for idle tasks, which the enable paths skip as they are
never scheduled through SCX. It is also an rcu_dereference_protected()
that expects @p's pi_lock or rq lock, which neither wrapper holds.
Passing NULL to scx_error() reaches scx_vexit(), which dereferences
sch->exit_info, oopsing the kernel.
One concrete trigger exercised while developing the fix: a
BPF_PROG_TYPE_SYSCALL program calling the select_cpu_and wrapper on an
exited-but-not-reaped task while a sub-scheduler was attached (its pid
stays findable while the zombie is unreaped; faulting instruction is
the scx_vexit() prologue "mov r15,[rdi+0x398]" with RDI=NULL and 0x398
the offset of sch->exit_info):
sched_ext: BPF scheduler "kfunc_subsched_null" enabled
sched_ext: BPF sub-scheduler "kfunc_subsched_null" enabled
sched_ext: Unassociated program run_select_cpu_ (id 76)
BUG: kernel NULL pointer dereference, address: 0000000000000398
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 8201 Comm: kfunc_test_runn Tainted: G W
RIP: 0010:scx_vexit+0x25/0xa0
Code: ... <4c> 8b bf 98 03 00 00 ...
CR2: 0000000000000398
Call Trace:
<TASK>
__scx_exit+0x4f/0x70
scx_bpf_select_cpu_and+0xab/0xb0
bpf_prog_430ed61a7b66e03a_run_select_cpu_and+0x9c/0xe7
? __x64_sys_bpf+0x2c/0x40
bpf_prog_test_run_syscall+0x130/0x2f0
__sys_bpf+0x930/0x10d0
? __x64_sys_bpf+0x2c/0x40
__x64_sys_bpf+0x2c/0x40
do_syscall_64+0xbc/0x460
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Read @p's scheduler under RCU instead, which the wrappers can do from
their guard(rcu)(): fault it when it can be determined, and when it
can't be determined -- @p is a task past sched_ext_dead() or an idle
task -- there is nothing obviously wrong to report, so just refuse the
call as before without faulting any scheduler.
These COMPAT wrappers are scheduled for eventual removal once the
deprecation grace period elapses, but until then -- and regardless of
their removal timeline -- they must not oops the kernel on a task they
are handed. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: fix bogus set_shrinker_bit() with cgroup.memory=nokmem
With cgroup.memory=nokmem, shrinker_memcg_alloc() bails out early and
never allocates an id, so shrinker->id keeps the 0 it got from the
kzalloc() in shrinker_alloc(). __list_lru_init() then copies that 0 into
lru->shrinker_id, where it looks like a valid bit index.
Nothing calls expand_shrinker_info() on nokmem either, so shrinker_nr_max
stays 0 and every memcg ends up with an empty map (map_nr_max == 0).
deferred_split_folio() hands a real memcg to __list_lru_add() regardless
of whether the lru is memcg aware, so the first THP queued in a cgroup
does set_shrinker_bit(memcg, nid, 0) and trips the bounds check:
WARNING: mm/shrinker.c:212 at set_shrinker_bit+0x7d/0x90, CPU#126
Call Trace:
<TASK>
deferred_split_folio+0x18c/0x220
map_anon_folio_pmd_nopf+0xdd/0x130
map_anon_folio_pmd_pf+0x14/0xb0
do_huge_pmd_anonymous_page+0x1a1/0x620
__handle_mm_fault+0xea9/0x10d0
handle_mm_fault+0xe5/0x320
do_user_addr_fault+0x1cc/0x870
exc_page_fault+0x81/0x1b0
asm_exc_page_fault+0x27/0x30
</TASK>
Harmless, the WARN_ON_ONCE() is what keeps the out of bounds unit[] read
from happening, but the id should not look valid in the first place.
Clear it before returning.
Two other spots could paper over this: drop the id in __list_lru_init()
when nokmem turns memcg_aware off, or make deferred_split_folio() pass
NULL like list_lru_add_obj() does. Both leave shrinker->id lying around
for the next caller, so fix it where the id is handed out. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: serialize state GC with device state flush
The deferred-device pass in xfrm_dev_state_flush() finds states under
xfrm_state_dev_gc_lock, but drops the lock before calling
xfrm_dev_state_free() because the driver callback may sleep. The device
GC list does not hold an xfrm_state reference, so the state GC worker can
destroy the same state concurrently.
The race can proceed as follows:
CPU 0 CPU 1
find x on the device GC list
drop xfrm_state_dev_gc_lock
read x->xso.dev
xfrm_state_gc_destroy(x)
xfrm_dev_state_free(x)
xfrm_state_free(x)
continue xfrm_dev_state_free(x)
Both paths can invoke the driver callback and drop the device reference.
CPU 0 can also access the xfrm_state after CPU 1 has freed it.
KASAN reported:
BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0
Read of size 8 at addr ffff88810bbaa960 by task poc/102
Call Trace:
xfrm_dev_state_free+0x24c/0x2a0
xfrm_dev_state_flush+0x353/0x400
xfrm_dev_event+0x26d/0x3a0
notifier_call_chain+0xc0/0x280
__dev_notify_flags+0x169/0x250
netif_change_flags+0xe7/0x160
dev_change_flags+0x96/0x220
devinet_ioctl+0x7f4/0x1880
Allocated by task 87:
xfrm_state_alloc+0x1e/0x5c0
xfrm_add_sa+0xe7f/0x5820
xfrm_user_rcv_msg+0x4f3/0x940
Freed by task 57:
kmem_cache_free+0xcb/0x3d0
xfrm_state_gc_task+0x4a8/0x650
process_one_work+0x63a/0x1070
Serialize xfrm_state destruction against the deferred-device pass with a
mutex. Keep xfrm_state_dev_gc_lock limited to list operations and retain
the existing callback and device-reference release ordering. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: release tail references on DELACTION failure
A batched RTM_DELACTION request takes a temporary reference on each
action before attempting any deletion. tcf_action_delete() clears
each processed slot and drops its temporary reference before attempting
the deletion. If deletion fails, tca_action_gd() calls
tcf_action_put_many() to release the remaining references, but its
tcf_act_for_each_action() iterator stops at the first NULL slot.
When a batch stops at an action bound to a filter, this leaks a
reference on each subsequent action. A later delete of an unbound
action can then return success without removing it from the IDR.
Walk the full array in tcf_action_put_many() and skip NULL slots to
release the references held on the unprocessed actions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb()
PSP conflicts with TLS ULP in its usage of both skb->decrypted and
sk->sk_validate_xmit_skb().
Make PSP mutually exclusive with TLS ULP, the only other user of either
of these. As other users of skb->decrypted come along, they can be added
to sk_has_decrypt_user(). It would make sense to also assert that
sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for
similar future proofing, but the PSP listener/sk_clone() path is still
broken and it could be seen as a regression to not allow rx assoc to run
on a child of a listener socket with PSP tx assoc state.
Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS
is the only one that conflicts with PSP via the decrypted bit. This is
intentional because PSP was not designed to be used with ULPs. It is
best to close off surface area that may make bugs reachable, until
someone wishes to design and test an actual user of PSP with ULPs. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix server->total_read for compound encrypted PDUs
In receive_encrypted_standard(), server->total_read is left at the
full decrypted frame size when walking sub-PDUs of a compound encrypted
frame. As a result, cifs_handle_standard() passes this full size
to smb2_check_message(), causing the PDU length guards to incorrectly
validate the entire compound frame instead of the current sub-PDU.
This allows truncated non-last sub-PDUs to bypass length validation,
leading to out-of-bounds reads in smb2_get_data_area_len().
Fix this by setting server->total_read to the true length of the
current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining
pdu_length for the last one. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject TKIP frames without a full MIC
libipw_michael_mic_verify() assumes that an skb contains an eight-byte
Michael MIC. A short TKIP frame makes the unsigned payload length wrap,
causing michael_mic() to read past the skb.
Check that the MIC is present before verifying it, and use the existing
MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
In cifs_query_reparse_point(), the start >= end check before casting to
struct reparse_data_buffer * only ensures the start pointer is within the
response. It fails to verify that there is enough space remaining for the
fixed 8-byte header of the structure.
If a server provides a DataOffset that leaves less than 8 bytes remaining,
the check passes, but subsequent reads of ReparseTag and ReparseDataLength
will occur out-of-bounds.
Fix this by ensuring the remaining space is at least the size of the
reparse_data_buffer structure before accessing its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Ack RX overrun interrupt correctly
The RX overrun interrupt is reported in interrupt status register 4, but
gmac_irq() acknowledges it using the RX descriptor error bit from status
register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1
the shift leaves no bit in the 32-bit register.
Acknowledge the same per-port RX overrun bit that was detected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check ras and obj before dereference
nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj
without checking either for NULL. Both amdgpu_ras_get_context() and
amdgpu_ras_find_obj() can return NULL, e.g. during the window between
adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to
enable the fatal-error interrupt as soon as possible) and the PCIE_BIF
ras object actually being created in RAS late_init. Any interrupt in that
window crashes in hard-IRQ context.
This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning
dereferencing obj for nbio_v7_4"), which fixed the same issue in the
nbio_v7_4 handler.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained
hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work
unconditionally. They can run from the L2CAP/SCO/ISO socket send path
while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN
racing with a socket write). Since that queue_work() is not chained
work from the tx_work worker itself, __queue_work() sees the queue
marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops
the work:
WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work
Call Trace:
queue_work_on
l2cap_chan_send
l2cap_sock_sendmsg
...
hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before
draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer()
check it before queuing. Route the tx_work producers through the
same guard via a shared hci_sched_tx() helper. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset state when starting AP fails
ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail
later, leaving it set forever. Scanning can then attempt to restore
beaconing on such an interface, leading to:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00
Call Trace:
drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160
__ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519
ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193
cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538
in hwsim. Also, cfg80211 then allows changing the interface type,
and the off-channel path getgs confused about beaconing as well,
leading to another warning:
WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchannel.c:122
ieee80211_start_sw_scan net/mac80211/scan.c:583 [inline]
__ieee80211_start_scan+0xfb6/0x1af0 net/mac80211/scan.c:882
Reset the state on failures to always have it correct. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: do not leave stale header offsets after pskb_carve()
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove
the first bytes of a packet and reallocate skb->head.
All the headers that were present before the operation are gone,
but both functions call skb_headers_offset_update(skb, 0), which
is a no-op : skb->mac_header, skb->network_header,
skb->transport_header and skb->csum_start keep their old values and
now describe bytes which are no longer there.
Both helpers size the new head from the old skb_end_offset(), so the
stale offsets still land inside the new allocation. They point past
skb_tail_pointer() though, to bytes that were never initialized.
pskb_carve_inside_nonlinear() is the worst case, because it leaves a
zombie skb with an empty linear part (skb->data ==
skb_tail_pointer(skb), skb_headlen(skb) == 0), while
skb_mac_header_was_set() is still true and skb->mac_header is way
ahead of skb->data.
The only user of pskb_extract() is rds_tcp_data_recv(), and the
carved skb is queued on tinc->ti_skb_list. When the RDS incoming
message is released, rds_tcp_inc_free() calls skb_queue_purge(),
which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is
visible from drop_monitor, which then tries to pull back to the
(bogus) mac header :
skbuff: __skb_pull(len=234)
skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0
end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288
shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5))
csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0)
hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60
kernel BUG at ./include/linux/skbuff.h:2847!
Add skb_carve_reset_headers() to mark the mac and transport headers
as not set, reset the network header, clear skb->mac_len, and drop
a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes
anything).
Invalidate the inner offsets as well. Unlike mac_header and
transport_header they have no "unset" sentinel, so a leftover
non-zero value still looks like a real header. Zero
skb->inner_mac_header, skb->inner_network_header,
skb->inner_transport_header, skb->inner_protocol and
skb->encapsulation, so that all the header state is invalidated in
one place.
v2: fixed an inaccurate changelog. The stale offsets stay inside the
new skb->head, which is never smaller than the old one, they
simply point past skb_tail_pointer() to bytes that are gone.
Thanks to Xuanqiang Luo for insisting on this.
Also invalidate the inner header state, as suggested by the
netdev AI review :
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com |
