Export limit exceeded: 408983 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (408983 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93432 | 1 Redhat | 11 Apicurio Registry, Build Keycloak, Build Of Apache Camel For Quarkus and 8 more | 2026-10-15 | 6.1 Medium |
| A flaw was found in the Quarkus Qute template engine. When the {#eval} section helper processes a sub-template, it fails to pass the parent template's content type information. This bypasses standard escaping mechanisms, allowing untrusted data to be output as raw, unescaped text. This vulnerability can lead to Cross-Site Scripting (XSS) and JSON Injection, potentially allowing a remote attacker to execute arbitrary code in a user's browser or manipulate data. | ||||
| CVE-2026-89058 | 1 Redhat | 22 Apicurio Registry, Build Keycloak, Build Of Apache Camel For Quarkus and 19 more | 2026-10-15 | 7.4 High |
| A flaw was found in RESTEasy's CorsFilter, which, when configured to allow all origins ("*"), reflects the request's Origin header back in the Access-Control-Allow-Origin response together with Access-Control-Allow-Credentials: true. This permissive cross-origin policy allows a malicious website to make credentialed cross-origin requests and read authenticated responses from a victim's session, resulting in a loss of confidentiality. | ||||
| CVE-2026-98425 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't warn when an IBSS has no channel to scan ieee80211_request_ibss_scan() warns when regulatory leaves no allowed channel, but that can happen as the regdomain can change while IBSS is operating, and it can continue to operate briefly during the 60s grace period until it's shut down. Just remove the warning in this case. | ||||
| CVE-2026-88203 | 1 Microsoft | 6 365 Apps, Microsoft 365 Apps For Enterprise, Microsoft Office Ltsc 2021 and 3 more | 2026-10-15 | 6.5 Medium |
| Untrusted pointer dereference in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-92777 | 1 Lenovo | 27 Idea Tab Lenovo Tab K11 Gen 2 Tb336fu , Idea Tab Lenovo Tab K11 Gen 2 Tb336fu Tb336zu , Idea Tab Lenovo Tab K11 Gen 2 Tb336zu and 24 more | 2026-10-15 | 6.4 Medium |
| A potential vulnerability was reported in some Lenovo Tablets that could allow a user with physical access to an unlocked tablet to bypass device protections and execute arbitrary code. | ||||
| CVE-2026-16755 | 1 Lenovo | 12 Smart Camera C33, Smart Camera C33 Pro, Smart Camera C35 and 9 more | 2026-10-15 | 5.3 Medium |
| A potential vulnerability was reported in Lenovo Smart Camera C33, distributed exclusively in the Chinese market, that could allow an unauthorized remote user to disclose sensitive information. | ||||
| CVE-2026-98387 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skcipher_walk_virt() were not properly checked before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt(). If skcipher_walk_virt() fails, the walk structure may be in an undefined state, and attempting to process data could lead to incorrect behavior or accessing uninitialized memory. Add proper return code checking to ensure correct handling of the walk initialization and walk advance and eventually return to the caller with that return code. | ||||
| CVE-2026-98389 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu] [ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu] [ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu] [ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu] [ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu] [ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu] [ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu] [ 1576.771460] process_one_work+0x23e/0x6f0 [ 1576.771491] worker_thread+0x1c4/0x380 [ 1576.771506] kthread+0x10c/0x150 [ 1576.771512] ? __pfx_worker_thread+0x10/0x10 [ 1576.771518] ? __pfx_kthread+0x10/0x10 [ 1576.771530] ret_from_fork+0x314/0x390 [ 1576.771537] ? __pfx_kthread+0x10/0x10 [ 1576.771546] ret_from_fork_asm+0x1a/0x30 (cherry picked from commit d93b1ff538ce9750c01e0dd0aa62575579c0fc08) | ||||
| CVE-2026-98390 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems. [ bp: Massage commit message. ] | ||||
| CVE-2026-98391 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Guard page-fault worker with runtime PM check During VM teardown, the VM's runtime PM reference is dropped asynchronously, allowing the device to autosuspend while stale page faults belonging to the now-dead VM are still queued. When the page-fault worker later tries to ack one of these, it calls into guc_ct_send_locked() on an already-suspended device, tripping: Assertion `!xe_pm_runtime_suspended(xe)` failed! WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe] A live VM/exec queue always holds a PM reference while it has outstanding work, so if the device is suspended at ack time, the owning context is already gone and the fault is stale. Take a runtime PM reference across the entire pagefault queue worker to safely deliver acks for torn-down VMs. v3: - Move PM ref to the generic xe_pagefault_queue_work using guard(xe_pm_runtime)(xe) instead of tracking it in the GuC backend(Matt Brost). v2: - Hold PM ref across the entire batch (begin/end) instead of per-ack. This prevents the device from autosuspending mid-batch, which would leave write_only acks written but the end flush skipped, and skip counter++, desyncing the cadence check.(Himal) - Add a comment explaining stale faults.(Himal) (cherry picked from commit fcc2431d2213dc4d04250c4f1ae87d9c3ae0d455) [Rodrigo: Added xe_device struct for compatibility while cherry-picking] | ||||
| CVE-2026-98395 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit When __replay_soft_interrupts() replays a pending interrupt (e.g. PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around each handler calls arch_interrupt_async_exit_prepare() on the way out, which calls arch_interrupt_exit_prepare() -> local_irq_disable() -> arch_local_irq_disable(), which does: irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */ This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1), stripping the IRQS_PMI_DISABLED (0x2) bit. The result is that irq_soft_mask is 0x1 instead of IRQS_ALL_DISABLED (0x3) when the handler returns to __replay_soft_interrupts(). For a normally-taken interrupt this is harmless: the next interrupt always enters through arch_interrupt_enter_prepare() which unconditionally sets irq_soft_mask to IRQS_ALL_DISABLED. But during replay, next_interrupt() is called directly between replayed handlers without going back through arch_interrupt_enter_prepare(), so the stripped bit is never restored. next_interrupt() then fires a WARNING: WARNING: arch/powerpc/kernel/irq_64.c:75 WARN_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED) The warning was observed early in boot on a POWER10 pseries guest during kmem_cache_init_late(), where a spinlock release triggers interrupt replay that processes a pending timer interrupt. Debugger state confirming the bug: Before timer_interrupt(®s): irq_soft_mask = 0x3 (IRQS_ALL_DISABLED) correct irq_happened = 0x41 (HARD_DIS|REPLAYING) correct After timer_interrupt(®s) returns: irq_soft_mask = 0x1 (IRQS_DISABLED) WRONG - PMI bit stripped irq_happened = 0x41 unchanged The fix is to replace local_irq_disable() with hard_irq_disable(). hard_irq_disable() is the right primitive here for two reasons: 1. On PPC64 (hw_irq.h:301) it calls irq_soft_mask_set_return(IRQS_ALL_DISABLED), setting the soft mask to 0x3 (both IRQS_DISABLED and IRQS_PMI_DISABLED), which preserves the PMI bit and fixes the WARNING. The additional work it does (__hard_irq_disable(), PACA_IRQ_HARD_DIS |=) is redundant but safe since both are already set at this point in the exit path; the trace_hardirqs_off() inside is guarded by if (!arch_irqs_disabled_flags(flags)) so it will not double-fire. 2. On PPC32 (hw_irq.h:467) hard_irq_disable() maps to arch_local_irq_disable() -> __hard_irq_disable(), which clears MSR[EE] in hardware. This is exactly correct: PPC32 has no soft-mask PACA mechanism, so the hardware disable is the right way to satisfy irqentry_exit()'s requirement. This also fixes a build error on PPC32 where irq_soft_mask_set() is only defined under CONFIG_PPC64: arch/powerpc/include/asm/entry-common.h:273: error: implicit declaration of function 'irq_soft_mask_set' Using hard_irq_disable() requires no #ifdef and is consistent with how the rest of the entry code (e.g. entry-common.h:463) handles the same PPC32/PPC64 split. | ||||
| CVE-2026-98396 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare() KUAP means kernel cannot touch user memory unless it explicitly is enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning to userspace just before RFI, kernel should restore the user AMR value back. Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare() as the last architecture step before returning to userspace. commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature") therefore called kuap_user_restore() from that hook. But on PowerPC that is too early. After irqentry_exit() / syscall_exit_to_user_mode() we still run platform specific exit routines. e.g. code snippets showing both exception handling and system call handling as the callers of function arch_exit_to_user_mode_prepare() which does kuap_user_restore(). The below path shows that calling kuap_user_restore() is too early when called from arch_exit_to_user_mode_prepare(). Exception handling in exceptions-64s.S ======================================= bl CFUNC(do_page_fault) ..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault) arch_interrupt_async_enter_prepare(regs); state = irqentry_enter(regs); instrumentation_begin(); irq_enter_rcu(); handler(regs); nap_adjust_return(regs); irq_exit_rcu(); instrumentation_end(); arch_interrupt_async_exit_prepare(regs); irqentry_exit(regs, state); <<< too early irqentry_exit_to_user_mode() __exit_to_user_mode_prepare(regs, EXIT_TO_USER_MODE_WORK_IRQ); arch_exit_to_user_mode_prepare(regs, ti_work); <<< too early b interrupt_return_srr .. bl CFUNC(interrupt_exit_user_prepare) <<< already calls kuap_user_restore prep_irq_for_enabled_exit() retry can run kernel code with IRQs on. So only when that routine is fully finished is when the user KUAP should be fully restored which interrupt_exit_user_prepare() already takes care of before returning. Similarly for system call handling in interrupt_64.S ====================================================== bl CFUNC(system_call_exception) .Lsyscall_exit: addi r4,r1,STACK_INT_FRAME_REGS li r5,0 /* !scv */ bl CFUNC(syscall_exit_prepare) .. kuap_assert_locked(); syscall_exit_to_user_mode(regs); <<< too early syscall_exit_to_user_mode_prepare(regs); <<< too early kuap_user_restore(regs); <<< already calls syscall_exit_prepare(), which can enable IRQs, replay a pending interrupt, and only then rfi. Those functions already restore KUAP immediately before rfi. Note that if we restore the user AMR too early like in the current code as shown from the code snippets above, then we get the following warning when CONFIG_PPC_KUAP_DEBUG is enabled: WARNING: arch/powerpc/include/asm/book3s/64/kup.h:293 at interrupt_exit_user_prepare+0x1a0/0x1c0 Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) TRAP: 0700 LR: c00000000000d8d4 CTR: c0000000021fe500 MSR: <SF,EE,ME,IR,DR,RI,LE> CR: 44000804 XER: 20040000 interrupt_exit_user_prepare+0x1a0/0x1c0 interrupt_return_srr_user+0x8/0x12c | ||||
| CVE-2026-98403 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid IPL parameter append past command line A command line may occupy all but the terminating byte of COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size to the IPL parameter conversion helpers and points the destination one byte past early_command_line. The helpers subtract one from the unsigned size and write the converted parameter outside the command line buffer. Convert the IPL parameter in the command line parsing buffer first. A parameter beginning with '=' can then replace the existing command line regardless of its length, while other parameters are appended only when space remains. | ||||
| CVE-2026-98413 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: always fill AVC decision in avc_has_perm_noaudit() avc_has_perm_noaudit() is documented to return a copy of the access decision in @avd, but its early return for an empty requested permission set leaves the buffer untouched. All callers pass an uninitialized stack variable and afterwards feed it to avc_audit(), and the inode hook even stores it in the per-task decision cache. Fill in a deny-all, audit-all decision, similar to avd_init(), so every caller receives a defined value at no cost on the hot path. | ||||
| CVE-2026-98421 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: require a peer station for TDLS setup confirm It's nonsense for the setup confirm to go to station that doesn't even exist, and it hits a warning when building the frame: WARN_ON_ONCE(!sta || !ap_sta) Only accept WLAN_TDLS_SETUP_CONFIRM when the station is already there as a TDLS station. Need to copy the call to ieee80211_tdls_prep_mgmt_packet() since the existing WLAN_TDLS_DISCOVERY_REQUEST already falls through to it. | ||||
| CVE-2026-98423 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: don't hand frames to mac80211 while stopping The code checks ->started for frames coming from wmediumd, but the radio can be stopped after the check and before frame delivery, causing mac80211 to hit the WARN_ON(!local->started). Expand the mutex for this case and synchronise against it when the radio is stopped to avoid being able to hit the warning with hwsim. Drop the error print that would've complicated the error path, it only triggers for allocation failures (already noisy) and malformed frames anyway. | ||||
| CVE-2026-94449 | 1 Redhat | 5 Apicurio Registry, Camel Quarkus, Exploit Intelligence and 2 more | 2026-10-15 | 7.5 High |
| A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory. | ||||
| CVE-2026-89059 | 1 Redhat | 22 Apicurio Registry, Build Keycloak, Build Of Apache Camel For Quarkus and 19 more | 2026-10-15 | 7.5 High |
| A flaw was found in RESTEasy's IIOImageProvider, which decodes attacker-supplied image request bodies without enforcing any limit on the declared image dimensions or pixel count. A remote, unauthenticated attacker can send a small crafted image declaring enormous dimensions to trigger a very large memory allocation, exhausting the JVM heap and resulting in a denial of service. | ||||
| CVE-2026-87744 | 1 Redhat | 3 Build Of Quarkus, Exploit Intelligence, Quarkus | 2026-10-15 | 9.1 Critical |
| A flaw was found in Quarkus REST Data Panache. This vulnerability allows unauthenticated attackers to bypass security controls on generated endpoints. When a developer customizes a specific operation using @MethodProperties without explicitly re-declaring security roles, the code generator silently drops class-level security requirements. This results in the affected endpoint defaulting to permissive, unauthenticated access, potentially leading to unauthorized information disclosure or data modification. | ||||
| CVE-2026-98399 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero contains readable lowcore data. A zero IPL parameter block address is then stored in lowcore, causing the stand-alone dumper to enter disabled wait after completing the dump. Explicitly store a zero IPL parameter block address and checksum when no re-IPL parameter block is available. This does not change the behavior: the stand-alone dumper completes the dump and halts, while valid re-IPL parameter blocks continue to be handled as before. | ||||