Export limit exceeded: 16374 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25707 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-35937 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-10-08 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check A-MSDU format more carefully If it looks like there's another subframe in the A-MSDU but the header isn't fully there, we can end up reading data out of bounds, only to discard later. Make this a bit more careful and check if the subframe header can even be present. | ||||
| CVE-2026-98135 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: reject invalid sectors_per_cluster in the boot sector is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field with a range test that rejects 0x81..0xf3 but accepts 0 and other non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector(): sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1; ... vol->cluster_size = vol->sector_size << sectors_per_cluster_bits; ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the shift is undefined: UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39 shift exponent 4294967295 is too large for 32-bit type 'int' This change rejects any non-power-of-two value, since it feeds the aforementioned shift via ffs() - 1, which only yields the correct shift for a power of two. | ||||
| CVE-2026-98136 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: bound $AttrDef table walk to the loaded table size ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the loop condition bounds only the start of each entry, not the whole entry: for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef < vol->attrdef_size && ad->type; ++ad) struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and the loop body reads further fields. vol->attrdef is kvzalloc(i_size), where i_size is the on-disk $AttrDef data size, checked in load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose $AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the read of ad->type run past the allocation. Creating a file reaches this through ntfs_attr_size_bounds_check() and reads out of bounds: BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0 Read of size 4 at addr ffff888005833280 by task init/1 ntfs_attr_find_in_attrdef ntfs_attr_size_bounds_check ntfs_attr_can_be_non_resident ntfs_attr_add Require the whole entry to lie within attrdef_size in the loop guard, and reject at mount a $AttrDef too small to hold one attr_def entry. | ||||
| CVE-2026-98137 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: treat any nonzero dio zero-range return as an error ntfs_dio_zero_range() returns either 0 or a negative errno from blkdev_issue_zeroout(); it never returns a positive value. The zeroing failure check in ntfs_attr_fallocate() therefore never fired, so a failed zeroing operation was silently ignored: the loop kept going, the newly allocated clusters were folded into initialized_size and the write could succeed leaving stale on-disk data. Treat any nonzero return as an error and abort the allocation. | ||||
| CVE-2026-98138 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: do not mark the volume clean in sync_fs when errors were recorded ntfs_put_super() and the remount-read-only path both clear the dirty bit only when NVolErrors(vol) is false. ntfs_sync_fs() clears it unconditionally, so any sync() on a volume that recorded an error marks that volume clean. A volume without this set is then seen as not needing recovery and it does not run one, so whatever went wrong is never repaired. This change skips resetting the dirty bit when there are volume errors. Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the error flag while leaving the mount read-write: after a write and a sync, the on-disk volume flags read 0x0000 with this driver and 0x0001 with the guard in place. | ||||
| CVE-2026-98139 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: only count successfully cleared runs when freeing clusters ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed whenever the error bookkeeping condition is false, which includes cases where ntfs_bitmap_clear_run() actually failed - e.g. a second run failing with the same errno as an earlier one, or any failure after a non-ENOMEM error was already recorded. Since a failed ntfs_bitmap_clear_run() rolls back its partial modifications, no bits were cleared for that run, yet its length still inflates vol->free_clusters, corrupting statfs output and the allocator's free space gate. Only count runs whose bitmap clear succeeded. | ||||
| CVE-2026-63999 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: rss: fix indir_table and hkey leak on get_rxfh failure rss_prepare_get() allocates the indirection table and hash key buffer via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them. If get_rxfh() fails, the function returns an error without freeing the allocation. | ||||
| CVE-2026-63986 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure The goto err label leads to: genlmsg_cancel(skb, ehdr); return ret; If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg. There's nothing to cancel, and passing an error pointer to genlmsg_cancel() would cause a crash. | ||||
| CVE-2026-63988 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in sysfs path Since the start of the git history, brport_store() always acquired the bridge lock. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function was only used by two STP related attributes (cost and priority). Nowadays, brport_store() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port: Only requires RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the two STP related attributes that require it. Remove the now stale comment from br_switchdev_set_port_flag(). The SWITCHDEV_F_DEFER flag can be removed in net-next. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 5 locks held by bash/372: #0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740) #1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343) #2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344) #3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326) #4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235) brport_store (net/bridge/br_sysfs_if.c:346) kernfs_fop_write_iter (fs/kernfs/file.c:352) new_sync_write (fs/read_write.c:595) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-63989 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bridge: Fix sleep in atomic context in netlink path Since the introduction of the netlink configuration path for bridge ports in commit 25c71c75ac87 ("bridge: bridge port parameters over netlink"), br_setport() was always called with the bridge lock held around it. Back then this decision made sense: The bridge lock protects the STP state of the bridge and its ports and at that time the function only processed three STP related netlink attributes (cost, priority and state). Nowadays, br_setport() processes a lot more attributes and most of them do not need the bridge lock: * Bridge flags: Only require RTNL. Read locklessly by the data path. Annotations can be added in net-next. * FDB port flushing: Only requires the FDB lock. * Multicast attributes: Only require the multicast lock. * Group forward mask: Only requires RTNL. Read locklessly by the data path. Annotations can be added in net-next. * Backup port and NHID: Only require RTNL. Read locklessly by the data path. This is a problem as the bridge calls dev_set_promiscuity() when certain bridge port flags change and this function can sleep since the commit cited below, resulting in a splat such as [1]. Fix this by reducing the scope of the bridge lock and only take it when processing the three STP related attributes that require it. This is consistent with the multicast attributes where each attribute acquires the multicast lock instead of having one critical section for all relevant attributes. [1] BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 2 locks held by bridge/356: #0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002) #1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117) Preemption disabled at: 0x0 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) __might_resched.cold (kernel/sched/core.c:9163) netif_rx_mode_run (net/core/dev_addr_lists.c:1262) netif_rx_mode_sync (net/core/dev_addr_lists.c:1428) dev_set_promiscuity (net/core/dev_api.c:289) br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172) br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747) br_setport (net/bridge/br_netlink.c:1000) br_setlink (net/bridge/br_netlink.c:1118) rtnl_bridge_setlink (net/core/rtnetlink.c:5572) rtnetlink_rcv_msg (net/core/rtnetlink.c:7005) netlink_rcv_skb (net/netlink/af_netlink.c:2550) netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4)) ____sys_sendmsg (net/socket.c:2698) ___sys_sendmsg (net/socket.c:2752) __sys_sendmsg (net/socket.c:2784) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) | ||||
| CVE-2026-63990 | 1 Linux | 1 Linux Kernel | 2026-10-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: refuse to enslave CAN devices syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. | ||||
| CVE-2026-63991 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt() The skb_clone() function can return NULL if memory allocation fails. send_mcast_pkt() calls skb_clone() without checking the return value, which can lead to a NULL pointer dereference in send_pkt() when it dereferences skb->data. Add a NULL check after skb_clone() and skip the peer if the clone fails. | ||||
| CVE-2020-35501 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-10-07 | 3.4 Low |
| A flaw was found in the Linux kernels implementation of audit rules, where a syscall can unexpectedly not be correctly not be logged by the audit subsystem | ||||
| CVE-2020-14304 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 4.4 Medium |
| A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. | ||||
| CVE-2025-3928 | 3 Commvault, Linux, Microsoft | 3 Commvault, Linux Kernel, Windows | 2026-10-07 | 8.8 High |
| Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28. | ||||
| CVE-2026-58649 | 3 Apple, Linux, Microsoft | 9 Macos, Linux Kernel, .net and 6 more | 2026-10-07 | 6.5 Medium |
| Origin validation error in .NET allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-98361 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO pages") dropped the access permission test from rxe_check_pagefault() and left only HMM_PFN_VALID. A page faulted in read-only, for example a page-cache folio behind a PROT_READ file mapping, then satisfies the check and ODP write operations (RDMA WRITE, RDMA READ response, SEND payload, atomics) modify it through kmap without ever breaking CoW. An unprivileged user can register an ODP MR over such a mapping and have incoming RDMA traffic overwrite the page cache of a file it only holds O_RDONLY, including /etc/passwd or setuid binaries. This is the same primitive class as Dirty COW and CVE-2022-2590. mlx5 has the missing invariant: its ODP path sets the device write bit only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring HMM_PFN_WRITE in rxe_check_pagefault() for every operation except RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting forever. For a writable VMA the fault breaks CoW and the write lands in the private page. Keep pmem flushes on the read-only check. arch_wb_cache_pmem() never modifies memory, and the FLUSH access bits do not make the umem writable, so classifying flushes as writes would make every flush against a flush-only MR fail. | ||||
| CVE-2026-98172 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally. | ||||
| CVE-2026-98358 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: IB/iser: reject a remote invalidation of an unregistered direction A write command whose data is sent entirely as immediate data is not registered. iser_reg_mem_fastreg() takes the DMA key path and leaves rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has already set dir[ISER_DIR_OUT]. iser_check_remote_inv() looks at dir[] alone and hands the descriptor to iser_inv_desc(), which reads desc->sig_protected. A target that answers such a command with IB_WR_SEND_WITH_INV faults the initiator. Leaving those commands unregistered is deliberate. The same function already terminates the connection when a target sends a remote invalidation the initiator did not ask for. A target that invalidates a direction that was never registered is in the same class, so give it the same answer. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 0 UID: 0 PID: 40 Comm: kworker/u8:2 Not tainted 7.2.0-rc5-ISERHOST-gf5098b6bae76-dirty #3 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: rxe_wq do_work RIP: 0010:iser_task_rsp+0x6d6/0xec0 Code: 48 c1 ea 03 80 3c 02 00 0f 85 ba 06 00 00 48 8b 9b 78 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 20 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 06 0f 8e 76 06 00 00 80 7b 20 00 0f 84 3d 04 RSP: 0018:ffff88811b008db8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000001848 RDX: 0000000000000004 RSI: 1ffff11021587b12 RDI: 0000000000000020 RBP: ffff88810adc1ae4 R08: ffff888109b7f860 R09: ffffffff90a922c0 R10: ffff88810adc1a1c R11: 000000000000003c R12: ffff888109b7f800 R13: ffff88810adc1acc R14: ffff888109b7f820 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88818a676000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000005afe2b CR3: 000000010af23005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <IRQ> __ib_process_cq+0xe1/0x390 ib_poll_handler+0x6e/0x200 irq_poll_softirq+0x1df/0x480 ? clockevents_program_event+0x2ba/0x860 ? __pfx_irq_poll_softirq+0x10/0x10 handle_softirqs+0x18e/0x590 ? __pfx_handle_softirqs+0x10/0x10 ? __hrtimer_rearm_deferred+0x156/0x450 do_softirq+0x3b/0x60 </IRQ> <TASK> __local_bh_enable_ip+0x61/0x70 __alloc_skb+0x732/0x890 ? _raw_spin_lock_irqsave+0x85/0xe0 ? __pfx___alloc_skb+0x10/0x10 ? _raw_read_unlock_irqrestore+0x16/0x50 rxe_init_packet+0x16b/0x4f0 prepare_ack_packet+0xb8/0x830 rxe_receiver+0x499/0x9980 ? __pfx_rxe_receiver+0x10/0x10 ? rxe_completer+0x29e5/0x38c0 ? hrtimer_start_range_ns_common+0x75f/0x1730 ? hrtimer_start_range_ns+0xa6/0x2c0 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_rxe_receiver+0x10/0x10 do_work+0x144/0x470 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-98360 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the same MGID while the address is being programmed, the post-add re-check under mcg_lock finds the winner; this caller then drops its private object and balances its own rxe_mcast_add() with rxe_mcast_del() before returning the winner. Reproduced by forcing the rxe_mcast_add() error return under KASAN: without the change the next attach to the same MGID reports a slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure returns cleanly. A no-injection attach/detach regression, including a two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. | ||||