| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: as73211: Ensure buffer holes are zeroed
Given that the buffer is copied to a kfifo that ultimately user space
can read, ensure we zero it. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Make insn_rw_emulate_bits() do insn->n samples
The `insn_rw_emulate_bits()` function is used as a default handler for
`INSN_READ` instructions for subdevices that have a handler for
`INSN_BITS` but not for `INSN_READ`. Similarly, it is used as a default
handler for `INSN_WRITE` instructions for subdevices that have a handler
for `INSN_BITS` but not for `INSN_WRITE`. It works by emulating the
`INSN_READ` or `INSN_WRITE` instruction handling with a constructed
`INSN_BITS` instruction. However, `INSN_READ` and `INSN_WRITE`
instructions are supposed to be able read or write multiple samples,
indicated by the `insn->n` value, but `insn_rw_emulate_bits()` currently
only handles a single sample. For `INSN_READ`, the comedi core will
copy `insn->n` samples back to user-space. (That triggered KASAN
kernel-infoleak errors when `insn->n` was greater than 1, but that is
being fixed more generally elsewhere in the comedi core.)
Make `insn_rw_emulate_bits()` either handle `insn->n` samples, or return
an error, to conform to the general expectation for `INSN_READ` and
`INSN_WRITE` handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Fix jump offset calculation in tailcall
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
54: bgeu $a2, $t1, -8 # 0x0000004c
58: addi.d $a6, $s5, -1
5c: bltz $a6, -16 # 0x0000004c
60: alsl.d $t2, $a2, $a1, 0x3
64: ld.d $t2, $t2, 264
68: beq $t2, $zero, -28 # 0x0000004c
Before apply this patch, the follow test case will reveal soft lock issues.
cd tools/testing/selftests/bpf/
./test_progs --allow=tailcalls/tailcall_bpf2bpf_1
dmesg:
watchdog: BUG: soft lockup - CPU#2 stuck for 26s! [test_progs:25056] |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Regular file corruption check
The reproducer builds a corrupted file on disk with a negative i_size value.
Add a check when opening this file to avoid subsequent operation failures. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Abort __tc_modify_qdisc if parent class does not exist
Lion's patch [1] revealed an ancient bug in the qdisc API.
Whenever a user creates/modifies a qdisc specifying as a parent another
qdisc, the qdisc API will, during grafting, detect that the user is
not trying to attach to a class and reject. However grafting is
performed after qdisc_create (and thus the qdiscs' init callback) is
executed. In qdiscs that eventually call qdisc_tree_reduce_backlog
during init or change (such as fq, hhf, choke, etc), an issue
arises. For example, executing the following commands:
sudo tc qdisc add dev lo root handle a: htb default 2
sudo tc qdisc add dev lo parent a: handle beef fq
Qdiscs such as fq, hhf, choke, etc unconditionally invoke
qdisc_tree_reduce_backlog() in their control path init() or change() which
then causes a failure to find the child class; however, that does not stop
the unconditional invocation of the assumed child qdisc's qlen_notify with
a null class. All these qdiscs make the assumption that class is non-null.
The solution is ensure that qdisc_leaf() which looks up the parent
class, and is invoked prior to qdisc_create(), should return failure on
not finding the class.
In this patch, we leverage qdisc_leaf to return ERR_PTRs whenever the
parentid doesn't correspond to a class, so that we can detect it
earlier on and abort before qdisc_create is called.
[1] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix GPF in bitmap_get_stats()
The commit message of commit 6ec1f0239485 ("md/md-bitmap: fix stats
collection for external bitmaps") states:
Remove the external bitmap check as the statistics should be
available regardless of bitmap storage location.
Return -EINVAL only for invalid bitmap with no storage (neither in
superblock nor in external file).
But, the code does not adhere to the above, as it does only check for
a valid super-block for "internal" bitmaps. Hence, we observe:
Oops: GPF, probably for non-canonical address 0x1cd66f1f40000028
RIP: 0010:bitmap_get_stats+0x45/0xd0
Call Trace:
seq_read_iter+0x2b9/0x46a
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6d/0xf0
do_syscall_64+0x8c/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
We fix this by checking the existence of a super-block for both the
internal and external case. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails.
syzbot reported a warning below [1] following a fault injection in
nfs_fs_proc_net_init(). [0]
When nfs_fs_proc_net_init() fails, /proc/net/rpc/nfs is not removed.
Later, rpc_proc_exit() tries to remove /proc/net/rpc, and the warning
is logged as the directory is not empty.
Let's handle the error of nfs_fs_proc_net_init() properly.
[0]:
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:123)
should_fail_ex (lib/fault-inject.c:73 lib/fault-inject.c:174)
should_failslab (mm/failslab.c:46)
kmem_cache_alloc_noprof (mm/slub.c:4178 mm/slub.c:4204)
__proc_create (fs/proc/generic.c:427)
proc_create_reg (fs/proc/generic.c:554)
proc_create_net_data (fs/proc/proc_net.c:120)
nfs_fs_proc_net_init (fs/nfs/client.c:1409)
nfs_net_init (fs/nfs/inode.c:2600)
ops_init (net/core/net_namespace.c:138)
setup_net (net/core/net_namespace.c:443)
copy_net_ns (net/core/net_namespace.c:576)
create_new_namespaces (kernel/nsproxy.c:110)
unshare_nsproxy_namespaces (kernel/nsproxy.c:218 (discriminator 4))
ksys_unshare (kernel/fork.c:3123)
__x64_sys_unshare (kernel/fork.c:3190)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
[1]:
remove_proc_entry: removing non-empty directory 'net/rpc', leaking at least 'nfs'
WARNING: CPU: 1 PID: 6120 at fs/proc/generic.c:727 remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727
Modules linked in:
CPU: 1 UID: 0 PID: 6120 Comm: syz.2.27 Not tainted 6.16.0-rc1-syzkaller-00010-g2c4a1f3fe03e #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
RIP: 0010:remove_proc_entry+0x45e/0x530 fs/proc/generic.c:727
Code: 3c 02 00 0f 85 85 00 00 00 48 8b 93 d8 00 00 00 4d 89 f0 4c 89 e9 48 c7 c6 40 ba a2 8b 48 c7 c7 60 b9 a2 8b e8 33 81 1d ff 90 <0f> 0b 90 90 e9 5f fe ff ff e8 04 69 5e ff 90 48 b8 00 00 00 00 00
RSP: 0018:ffffc90003637b08 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff88805f534140 RCX: ffffffff817a92c8
RDX: ffff88807da99e00 RSI: ffffffff817a92d5 RDI: 0000000000000001
RBP: ffff888033431ac0 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888033431a00
R13: ffff888033431ae4 R14: ffff888033184724 R15: dffffc0000000000
FS: 0000555580328500(0000) GS:ffff888124a62000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f71733743e0 CR3: 000000007f618000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sunrpc_exit_net+0x46/0x90 net/sunrpc/sunrpc_syms.c:76
ops_exit_list net/core/net_namespace.c:200 [inline]
ops_undo_list+0x2eb/0xab0 net/core/net_namespace.c:253
setup_net+0x2e1/0x510 net/core/net_namespace.c:457
copy_net_ns+0x2a6/0x5f0 net/core/net_namespace.c:574
create_new_namespaces+0x3ea/0xa90 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:218
ksys_unshare+0x45b/0xa40 kernel/fork.c:3121
__do_sys_unshare kernel/fork.c:3192 [inline]
__se_sys_unshare kernel/fork.c:3190 [inline]
__x64_sys_unshare+0x31/0x40 kernel/fork.c:3190
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x490 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fa1a6b8e929
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on ino and xnid
syzbot reported a f2fs bug as below:
INFO: task syz-executor140:5308 blocked for more than 143 seconds.
Not tainted 6.14.0-rc7-syzkaller-00069-g81e4f8d68c66 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor140 state:D stack:24016 pid:5308 tgid:5308 ppid:5306 task_flags:0x400140 flags:0x00000006
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5378 [inline]
__schedule+0x190e/0x4c90 kernel/sched/core.c:6765
__schedule_loop kernel/sched/core.c:6842 [inline]
schedule+0x14b/0x320 kernel/sched/core.c:6857
io_schedule+0x8d/0x110 kernel/sched/core.c:7690
folio_wait_bit_common+0x839/0xee0 mm/filemap.c:1317
__folio_lock mm/filemap.c:1664 [inline]
folio_lock include/linux/pagemap.h:1163 [inline]
__filemap_get_folio+0x147/0xb40 mm/filemap.c:1917
pagecache_get_page+0x2c/0x130 mm/folio-compat.c:87
find_get_page_flags include/linux/pagemap.h:842 [inline]
f2fs_grab_cache_page+0x2b/0x320 fs/f2fs/f2fs.h:2776
__get_node_page+0x131/0x11b0 fs/f2fs/node.c:1463
read_xattr_block+0xfb/0x190 fs/f2fs/xattr.c:306
lookup_all_xattrs fs/f2fs/xattr.c:355 [inline]
f2fs_getxattr+0x676/0xf70 fs/f2fs/xattr.c:533
__f2fs_get_acl+0x52/0x870 fs/f2fs/acl.c:179
f2fs_acl_create fs/f2fs/acl.c:375 [inline]
f2fs_init_acl+0xd7/0x9b0 fs/f2fs/acl.c:418
f2fs_init_inode_metadata+0xa0f/0x1050 fs/f2fs/dir.c:539
f2fs_add_inline_entry+0x448/0x860 fs/f2fs/inline.c:666
f2fs_add_dentry+0xba/0x1e0 fs/f2fs/dir.c:765
f2fs_do_add_link+0x28c/0x3a0 fs/f2fs/dir.c:808
f2fs_add_link fs/f2fs/f2fs.h:3616 [inline]
f2fs_mknod+0x2e8/0x5b0 fs/f2fs/namei.c:766
vfs_mknod+0x36d/0x3b0 fs/namei.c:4191
unix_bind_bsd net/unix/af_unix.c:1286 [inline]
unix_bind+0x563/0xe30 net/unix/af_unix.c:1379
__sys_bind_socket net/socket.c:1817 [inline]
__sys_bind+0x1e4/0x290 net/socket.c:1848
__do_sys_bind net/socket.c:1853 [inline]
__se_sys_bind net/socket.c:1851 [inline]
__x64_sys_bind+0x7a/0x90 net/socket.c:1851
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Let's dump and check metadata of corrupted inode, it shows its xattr_nid
is the same to its i_ino.
dump.f2fs -i 3 chaseyu.img.raw
i_xattr_nid [0x 3 : 3]
So that, during mknod in the corrupted directory, it tries to get and
lock inode page twice, result in deadlock.
- f2fs_mknod
- f2fs_add_inline_entry
- f2fs_get_inode_page --- lock dir's inode page
- f2fs_init_acl
- f2fs_acl_create(dir,..)
- __f2fs_get_acl
- f2fs_getxattr
- lookup_all_xattrs
- __get_node_page --- try to lock dir's inode page
In order to fix this, let's add sanity check on ino and xnid. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid __bpf_prog_ret0_warn when jit fails
syzkaller reported an issue:
WARNING: CPU: 3 PID: 217 at kernel/bpf/core.c:2357 __bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Modules linked in:
CPU: 3 UID: 0 PID: 217 Comm: kworker/u32:6 Not tainted 6.15.0-rc4-syzkaller-00040-g8bac8898fe39
RIP: 0010:__bpf_prog_ret0_warn+0xa/0x20 kernel/bpf/core.c:2357
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1316 [inline]
__bpf_prog_run include/linux/filter.h:718 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
cls_bpf_classify+0x74a/0x1110 net/sched/cls_bpf.c:105
...
When creating bpf program, 'fp->jit_requested' depends on bpf_jit_enable.
This issue is triggered because of CONFIG_BPF_JIT_ALWAYS_ON is not set
and bpf_jit_enable is set to 1, causing the arch to attempt JIT the prog,
but jit failed due to FAULT_INJECTION. As a result, incorrectly
treats the program as valid, when the program runs it calls
`__bpf_prog_ret0_warn` and triggers the WARN_ON_ONCE(1). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Check return value from memblock_phys_alloc_range()
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of
contiguous free memory available at this point, the kernel will crash
and burn because memblock_phys_alloc_range() returns 0 on failure,
which leads memblock_phys_free() to throw the first 4 MiB of physical
memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic,
but in fact everything seems to work fine without the weird reserve
allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
rseq: Fix segfault on registration when rseq_cs is non-zero
The rseq_cs field is documented as being set to 0 by user-space prior to
registration, however this is not currently enforced by the kernel. This
can result in a segfault on return to user-space if the value stored in
the rseq_cs field doesn't point to a valid struct rseq_cs.
The correct solution to this would be to fail the rseq registration when
the rseq_cs field is non-zero. However, some older versions of glibc
will reuse the rseq area of previous threads without clearing the
rseq_cs field and will also terminate the process if the rseq
registration fails in a secondary thread. This wasn't caught in testing
because in this case the leftover rseq_cs does point to a valid struct
rseq_cs.
What we can do is clear the rseq_cs field on registration when it's
non-zero which will prevent segfaults on registration and won't break
the glibc versions that reuse rseq areas on thread creation. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix unconditional IO throttle caused by REQ_PREFLUSH
When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush()
generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC,
which causes the flush_bio to be throttled by wbt_wait().
An example from v5.4, similar problem also exists in upstream:
crash> bt 2091206
PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0"
#0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8
#1 [ffff800084a2f820] __schedule at ffff800040bfa0c4
#2 [ffff800084a2f880] schedule at ffff800040bfa4b4
#3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4
#4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc
#5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0
#6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254
#7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38
#8 [ffff800084a2fa60] generic_make_request at ffff800040570138
#9 [ffff800084a2fae0] submit_bio at ffff8000405703b4
#10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs]
#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs]
#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs]
#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs]
#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs]
#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs]
#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08
#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc
#18 [ffff800084a2fe70] kthread at ffff800040118de4
After commit 2def2845cc33 ("xfs: don't allow log IO to be throttled"),
the metadata submitted by xlog_write_iclog() should not be throttled.
But due to the existence of the dm layer, throttling flush_bio indirectly
causes the metadata bio to be throttled.
Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes
wbt_should_throttle() return false to avoid wbt_wait(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc: fix softlockup in __read_vmcore (part 2)
Since commit 5cbcb62dddf5 ("fs/proc: fix softlockup in __read_vmcore") the
number of softlockups in __read_vmcore at kdump time have gone down, but
they still happen sometimes.
In a memory constrained environment like the kdump image, a softlockup is
not just a harmless message, but it can interfere with things like RCU
freeing memory, causing the crashdump to get stuck.
The second loop in __read_vmcore has a lot more opportunities for natural
sleep points, like scheduling out while waiting for a data write to
happen, but apparently that is not always enough.
Add a cond_resched() to the second loop in __read_vmcore to (hopefully)
get rid of the softlockups. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: cls_flow: validate TCA_FLOW_RSHIFT attribute
syzbot found that TCA_FLOW_RSHIFT attribute was not validated.
Right shitfing a 32bit integer is undefined for large shift values.
UBSAN: shift-out-of-bounds in net/sched/cls_flow.c:329:23
shift exponent 9445 is too large for 32-bit type 'u32' (aka 'unsigned int')
CPU: 1 UID: 0 PID: 54 Comm: kworker/u8:3 Not tainted 6.13.0-rc3-syzkaller-00180-g4f619d518db9 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
flow_classify+0x24d5/0x25b0 net/sched/cls_flow.c:329
tc_classify include/net/tc_wrapper.h:197 [inline]
__tcf_classify net/sched/cls_api.c:1771 [inline]
tcf_classify+0x420/0x1160 net/sched/cls_api.c:1867
sfb_classify net/sched/sch_sfb.c:260 [inline]
sfb_enqueue+0x3ad/0x18b0 net/sched/sch_sfb.c:318
dev_qdisc_enqueue+0x4b/0x290 net/core/dev.c:3793
__dev_xmit_skb net/core/dev.c:3889 [inline]
__dev_queue_xmit+0xf0e/0x3f50 net/core/dev.c:4400
dev_queue_xmit include/linux/netdevice.h:3168 [inline]
neigh_hh_output include/net/neighbour.h:523 [inline]
neigh_output include/net/neighbour.h:537 [inline]
ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236
iptunnel_xmit+0x55d/0x9b0 net/ipv4/ip_tunnel_core.c:82
udp_tunnel_xmit_skb+0x262/0x3b0 net/ipv4/udp_tunnel_core.c:173
geneve_xmit_skb drivers/net/geneve.c:916 [inline]
geneve_xmit+0x21dc/0x2d00 drivers/net/geneve.c:1039
__netdev_start_xmit include/linux/netdevice.h:5002 [inline]
netdev_start_xmit include/linux/netdevice.h:5011 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x27a/0x7d0 net/core/dev.c:3606
__dev_queue_xmit+0x1b73/0x3f50 net/core/dev.c:4434 |
| In the Linux kernel, the following vulnerability has been resolved:
tomoyo: don't emit warning in tomoyo_write_control()
syzbot is reporting too large allocation warning at tomoyo_write_control(),
for one can write a very very long line without new line character. To fix
this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE,
for practically a valid line should be always shorter than 32KB where the
"too small to fail" memory-allocation rule applies.
One might try to write a valid line that is longer than 32KB, but such
request will likely fail with -ENOMEM. Therefore, I feel that separately
returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant.
There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_init_flow()
There are code paths from which the function is called without holding
the RCU read lock, resulting in a suspicious RCU usage warning [1].
Fix by using l3mdev_master_upper_ifindex_by_index() which will acquire
the RCU read lock before calling
l3mdev_master_upper_ifindex_by_index_rcu().
[1]
WARNING: suspicious RCU usage
6.12.0-rc3-custom-gac8f72681cf2 #141 Not tainted
-----------------------------
net/core/dev.c:876 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/361:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60
stack backtrace:
CPU: 3 UID: 0 PID: 361 Comm: ip Not tainted 6.12.0-rc3-custom-gac8f72681cf2 #141
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl+0xba/0x110
lockdep_rcu_suspicious.cold+0x4f/0xd6
dev_get_by_index_rcu+0x1d3/0x210
l3mdev_master_upper_ifindex_by_index_rcu+0x2b/0xf0
ip_tunnel_bind_dev+0x72f/0xa00
ip_tunnel_newlink+0x368/0x7a0
ipgre_newlink+0x14c/0x170
__rtnl_newlink+0x1173/0x19c0
rtnl_newlink+0x6c/0xa0
rtnetlink_rcv_msg+0x3cc/0xf60
netlink_rcv_skb+0x171/0x450
netlink_unicast+0x539/0x7f0
netlink_sendmsg+0x8c1/0xd80
____sys_sendmsg+0x8f9/0xc20
___sys_sendmsg+0x197/0x1e0
__sys_sendmsg+0x122/0x1f0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_payload: sanitize offset and length before calling skb_checksum()
If access to offset + length is larger than the skbuff length, then
skb_checksum() triggers BUG_ON().
skb_checksum() internally subtracts the length parameter while iterating
over skbuff, BUG_ON(len) at the end of it checks that the expected
length to be included in the checksum calculation is fully consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: fix wild-memory-access in proto_unregister
There's issue as follows:
KASAN: maybe wild-memory-access in range [0xdead...108-0xdead...10f]
CPU: 3 UID: 0 PID: 2805 Comm: rmmod Tainted: G W
RIP: 0010:proto_unregister+0xee/0x400
Call Trace:
<TASK>
__do_sys_delete_module+0x318/0x580
do_syscall_64+0xc1/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
As bnep_init() ignore bnep_sock_init()'s return value, and bnep_sock_init()
will cleanup all resource. Then when remove bnep module will call
bnep_sock_cleanup() to cleanup sock's resource.
To solve above issue just return bnep_sock_init()'s return value in
bnep_exit(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: validate new SA's prefixlen using SA family when sel.family is unset
This expands the validation introduced in commit 07bf7908950a ("xfrm:
Validate address prefix lengths in the xfrm selector.")
syzbot created an SA with
usersa.sel.family = AF_UNSPEC
usersa.sel.prefixlen_s = 128
usersa.family = AF_INET
Because of the AF_UNSPEC selector, verify_newsa_info doesn't put
limits on prefixlen_{s,d}. But then copy_from_user_state sets
x->sel.family to usersa.family (AF_INET). Do the same conversion in
verify_newsa_info before validating prefixlen_{s,d}, since that's how
prefixlen is going to be used later on. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vboxvideo: Replace fake VLA at end of vbva_mouse_pointer_shape with real VLA
Replace the fake VLA at end of the vbva_mouse_pointer_shape shape with
a real VLA to fix a "memcpy: detected field-spanning write error" warning:
[ 13.319813] memcpy: detected field-spanning write (size 16896) of single field "p->data" at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 (size 4)
[ 13.319841] WARNING: CPU: 0 PID: 1105 at drivers/gpu/drm/vboxvideo/hgsmi_base.c:154 hgsmi_update_pointer_shape+0x192/0x1c0 [vboxvideo]
[ 13.320038] Call Trace:
[ 13.320173] hgsmi_update_pointer_shape [vboxvideo]
[ 13.320184] vbox_cursor_atomic_update [vboxvideo]
Note as mentioned in the added comment it seems the original length
calculation for the allocated and send hgsmi buffer is 4 bytes too large.
Changing this is not the goal of this patch, so this behavior is kept. |
