| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A heap-based buffer overflow was found in the DHCPv6 and TFTP response builders of libslirp. When the host is configured with a small interface MTU, a guest-supplied DHCPv6 CLIENTID option or TFTP blksize option can overflow the reply buffer with attacker-controlled content and length, resulting in denial of service and potentially arbitrary code execution in the host process. The default interface MTU is not affected. |
| A vulnerability was found in CRI-O related to the container checkpoint and restore feature. When CRI-O is configured to restore containers from checkpoint archives, insufficient validation of restore metadata may allow a user with sufficient privileges to perform unintended operations on the host filesystem. Successful exploitation requires that container checkpoint and restore functionality is enabled, which is not the default configuration. An attacker must also be able to trigger restoration of a container from untrusted checkpoint content. |
| The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback). |
| A flaw was found in `cockpit-ws`. This vulnerability allows a remote, unauthenticated attacker to cause a Denial of Service (DoS) by sending a specially crafted request. When the `WebService.UrlRoot` is configured and a request is made to the exact URL-root prefix without a trailing slash, `cockpit-ws` can terminate unexpectedly. This issue leads to the unavailability of the Cockpit web service. |
| A flaw was found in Redis community. The cluster bus packet parser, responsible for handling PING, PONG, and MEET packets, fails to properly validate string-carrying extensions for null-termination. This oversight allows a remote attacker to craft a malicious packet, leading to an out-of-bounds read when the packet's payload is processed. Successful exploitation of this vulnerability could result in the disclosure of sensitive information or a remote denial of service (DoS). |
| An unconstrained memory consumption vulnerability was discovered in Keycloak. It can be triggered in environments which have millions of offline tokens (> 500,000 users with each having at least 2 saved sessions). If an attacker creates two or more user sessions and then open the "consents" tab of the admin User Interface, the UI attempts to load a huge number of offline client sessions leading to excessive memory and CPU consumption which could potentially crash the entire system. |
| A signed integer overflow vulnerability was found in libarchive's ZIP writer. In the archive_write_zip_header function in archive_write_set_format_zip.c, when ZIP encryption is enabled and the entry file size is close to INT64_MAX, the addition of the encryption overhead to the entry size overflows int64_t, resulting in undefined behavior. This could lead to incorrect Zip64 extension decisions or potential memory corruption. |
| A flaw was found in the signature verification logic of noobaa-core, the core component of the NooBaa Multicloud Object Gateway. The issue occurs when the service processes S3 presigned URLs using Signature Version 4 (SigV4). Due to improper validation, the service fails to reject requests containing unsigned x-amz- headers, instead simply dropping them from the signature calculation. This allows an attacker who possesses a valid presigned PUT URL to add an unsigned x-amz-copy-source header, effectively converting a simple upload into a CopyObject operation. This can lead to unauthorized access and copying of any data the original signer is permitted to reach across the entire storage system. |
| A flaw was found in libxml2. A local user or an attacker providing a specially crafted XML catalog can trigger a NULL pointer dereference during XML catalog parsing. This occurs when a `nextCatalog` element lacks its mandatory `catalog` attribute, leading to the application crashing and causing a Denial of Service (DoS). |
| A flaw was found in Cockpit. An unauthenticated remote attacker can exploit this vulnerability by initiating and sustaining numerous simultaneous connections to the `cockpit-tls` service. This forces the service to create an unbounded number of detached threads, consuming system resources such as memory and file descriptors. The primary consequence is a denial of service (DoS), leading to degradation or complete unavailability of the Cockpit service for legitimate users. |
| A flaw was found in Cockpit. An integer overflow vulnerability in the `do_lastlog()` function, specifically in the offset calculation for `lastlog` entries on ILP32 (Integer, Long, Pointer 32-bit) builds, can be exploited. A low-privileged authenticated user with a specially provisioned large User ID (UID) can cause the computed offset to wrap around. This allows the user to perform unauthorized reads and writes to other users' `lastlog` records, potentially disclosing or altering sensitive login accounting information. |
| A vulnerability in CRI-O checkpoint restore allows a user who can create a pod from a malicious checkpointed container to bypass the destination Kubernetes security context. The restored process may retain credentials, Linux capabilities, no_new_privs, and seccomp state from the checkpoint instead of enforcing the destination configuration. This can allow execution with elevated privileges across the container security boundary.
Affected upstream supported versions are CRI-O 1.34 and later. Downstream Red Hat products are affected from OCP 4.17 onward. Fixes have been applied to supported branches but are not yet released.
Exploitation requires permission to create a pod from a malicious checkpoint image and checkpoint restore functionality to be available. |
| A flaw was found in libefiboot, a component of efivar. The device path node parser in libefiboot fails to validate that each node's Length field is at least 4 bytes, which is the minimum size for an EFI (Extensible Firmware Interface) device path node header. A local user could exploit this vulnerability by providing a specially crafted device path node. This can lead to infinite recursion, causing stack exhaustion and a process crash, resulting in a denial of service (DoS). |
| A vulnerability was found in Golang FIPS OpenSSL. This flaw allows a malicious user to randomly cause an uninitialized buffer length variable with a zeroed buffer to be returned in FIPS mode. It may also be possible to force a false positive match between non-equal hashes when comparing a trusted computed hmac sum to an untrusted input sum if an attacker can send a zeroed buffer in place of a pre-computed sum. It is also possible to force a derived key to be all zeros instead of an unpredictable value. This may have follow-on implications for the Go TLS stack. |
| A heap-based buffer overflow was found in Corosync's Totem Process Group (totempg) message reassembly. When processing fragmented multicast messages, the buffer used to reassemble fragments lacks a runtime bounds check in release builds. A network-adjacent attacker able to send crafted multicast protocol messages to the cluster could cause a heap buffer overflow with attacker-controlled data. This can crash the Corosync daemon, causing a denial of service to the entire cluster, and may potentially allow further exploitation given sufficient heap-corruption control. |
| A flaw was found in libkcapi. A local attacker can influence an application that uses the Asynchronous Input/Output (AIO) interface. By reusing an AIO-enabled handle after a prior completion error, the _kcapi_aio_read_all() function can enter a non-terminating wait loop. This can lead to a persistent denial of service, making the affected application or thread unresponsive. |
| Memory Corruption via Uncanceled AIO Requests on Error: libkcapi's one-shot AIO path can return an error before all submitted IOCBs are drained, allowing later kernel writes into caller-owned output buffers. |
| A flaw was found in libkcapi. When performing one-shot symmetric cipher operations on large inputs (over 64 KiB) in stateful modes such as Counter (CTR) or Cipher Block Chaining (CBC), the library improperly reuses the Initialization Vector (IV) for each internal data chunk. A remote attacker could potentially exploit this by making an application that uses libkcapi process specially crafted large inputs. This can lead to a significant weakening of data confidentiality, as the repeated IV use can expose relationships in encrypted plaintext, and may also affect data integrity by causing incorrect cryptographic processing. |
| Two case-insensitive comparisons on request-derived usernames outside the main authorization path in CUPS's scheduler (printer ACL validation and private-attribute filtering) could allow bypass of username-based access controls in certain configurations. |
| A flaw was found in Data Science Pipelines. A restricted user, or tenant, can exploit an improper authorization vulnerability in the setDefaultServiceAccount function. By specifying a more privileged ServiceAccount (SA) during a CreateRun request, an attacker can bypass authorization checks. This allows the tenant to run their containers with elevated privileges, potentially leading to the disclosure of sensitive information (secrets) and the ability to execute commands within other users' pods. |
