Export limit exceeded: 410577 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (17401 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72207 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: not change 0-byte $DATA attribute to non-resident When ntfs_resident_attr_resize() cannot grow a resident attribute in place, it retries after converting other resident attributes to non-resident to free space in the MFT recrord. Do not select zero-length resident $DATA attributes for this conversion. fsck treats 0-byte non-resident $DATA attribute as corruptions. | ||||
| CVE-2026-68463 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: use pm_runtime_resume_and_get() in suspend Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() to simplify error handling. pm_runtime_resume_and_get() automatically drops the usage counter on failure, avoiding the need for a separate pm_runtime_put_noidle() call. If it fails, the device is unclocked and accessing hardware registers would cause a kernel panic, so return the error immediately. | ||||
| CVE-2026-72022 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: llc: fix SAP refcount leak in llc_ui_autobind() llc_ui_autobind() opens a SAP after choosing a dynamic LSAP. llc_sap_open() returns a reference owned by the caller, and llc_sap_add_socket() takes a second reference for the socket's membership in the SAP hash tables. llc_ui_bind() drops the caller's reference after adding the socket, but llc_ui_autobind() keeps it. When the socket is closed, llc_sap_remove_socket() releases only the socket reference, leaving the SAP on llc_sap_list with sk_count == 0. This is user-visible because repeated autobind and close cycles can consume all dynamic SAP values and make later autobinds fail with -EUSERS. Drop the caller's reference after a successful autobind, matching llc_ui_bind()'s ownership model. | ||||
| CVE-2026-72037 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: Initialize eth_syslock spinlock before use lan743x_hardware_init() calls pci11x1x_strap_get_status() during the PCI11x1x probe sequence. That helper acquires the Ethernet subsystem hardware lock via lan743x_hs_syslock_acquire(), which relies on adapter->eth_syslock_spinlock to serialize access. The spinlock is currently initialized only after the strap status is read. With CONFIG_DEBUG_SPINLOCK enabled, taking the zeroed initialized spinlock can trip the spinlock debug check. Fix by initializing adapter->eth_syslock_spinlock before reading the strap status so the probe path never attempts to lock an uninitialized spinlock. | ||||
| CVE-2026-72043 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption. Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits: if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_MODIFIED; The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case, where pmd entries need the same treatment. This ensures the software dirty tracking bit (checked by pte_dirty() and pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is preserved across fork COW write-protection. The issue was found by the LTP madvise09 test case, which exercises page reclaim after "madvise(MADV_FREE), write and fork" operation sequence on private anonymous mappings. | ||||
| CVE-2026-72445 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: clear opened when stream enable fails On enable, subs->opened is set before the service_interval is validated; an invalid interval jumps to the response label without clearing it, so the substream is wedged at -EBUSY until a disable or disconnect. Clear subs->opened on the enable error path. | ||||
| CVE-2026-74448 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is always called on the error path without touching the uninitialized pqn pointer. AILIKFD-813 (cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) | ||||
| CVE-2026-19916 | 1 Code-projects | 1 Online Food Order System | 2026-08-18 | 3.5 Low |
| A vulnerability was detected in code-projects Online Food Order System 1.0. The affected element is an unknown function of the file edit_food_items.php. Performing a manipulation of the argument dname results in cross site scripting. Remote exploitation of the attack is possible. The exploit is now public and may be used. | ||||
| CVE-2026-72128 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path. | ||||
| CVE-2026-74500 | 1 Linux | 1 Linux Kernel | 2026-08-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix stack info leak in RME Digiface status snd_rme_digiface_read_status() reads a four-word status block from the device into an uninitialised on-stack __le32 buf[4] and, whenever the vendor control-IN transfer does not return a negative error, copies all four words into the caller's status[]. snd_usb_ctl_msg() copies the full requested size back into the caller's buffer regardless of how many bytes the data stage actually delivered: buf = kmemdup(data, size, GFP_KERNEL); err = usb_control_msg(dev, pipe, request, requesttype, value, index, buf, size, timeout); memcpy(data, buf, size); usb_control_msg() returns the transferred length on a short control-IN, which is a non-negative value, and writes only that many bytes. The remainder of the copy back is the kmemdup()ed image of the caller's buffer, so a device answering with a short data stage leaves the trailing words of buf[] holding leftover kernel stack. The only guard in the caller is err < 0, so those words are stored into status[]. They then reach user space: snd_rme_digiface_get_status_val() selects a 16-bit halfword of status[] per the control's reg/mask, and the eight Digiface status controls together expose the whole 16-byte frame to an unprivileged reader of /dev/snd/controlC*. Zero-initialise the buffer so a short read yields zeros instead of stack residue. This mirrors snd_rme_get_status1(), which already clears its output word before the same kind of vendor read. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-72815 | 1 Go-chi | 1 Chi | 2026-08-18 | 6.5 Medium |
| go-chi chi versions >= 5.2.1 and before 5.3.0 contain an IP spoofing vulnerability in the RealIP middleware, which blindly trusts the first (leftmost) value of the X-Forwarded-For HTTP header. A remote attacker can bypass IP-based access control lists and rate-limiting mechanisms, and forge log entries, by supplying a spoofed IP address in the X-Forwarded-For header. The issue is fixed in version 5.3.0. | ||||
| CVE-2026-6229 | 2 Wordpress, Wproyal | 2 Wordpress, Royal Addons For Elementor – Addons And Templates Kit For Elementor | 2026-08-17 | 7.2 High |
| The Royal Elementor Addons plugin for WordPress is vulnerable to Server-Side Request Forgery in versions up to, and including, 1.7.1057. This is due to insufficient validation of user-supplied URLs in the render_csv_data() function, which can be bypassed by including 'docs.google.com/spreadsheets' in a query parameter, and the subsequent use of these URLs in fopen() calls without blocking internal or private network addresses. This makes it possible for authenticated attackers, with Contributor-level access and above, to make requests to arbitrary URLs and retrieve sensitive information from internal services. | ||||
| CVE-2026-73410 | 1 Budibase | 1 Budibase | 2026-08-17 | 8.5 High |
| Budibase is an open-source low-code platform. Prior to 3.40.0, packages/backend-core/src/utils/outboundFetch.ts pinned a validated address through a Node agent, but the REST integration used getDispatcher from packages/backend-core/src/utils/fetch.ts, causing undici to ignore that agent and resolve the hostname again. A builder could use DNS rebinding to make packages/server/src/integrations/rest.ts connect to an internal address after a public address passed validation, with full response access and arbitrary REST methods. The fix adds createPinnedLookup support to the undici dispatcher and passes the validated address to custom fetch implementations. This issue is fixed in version 3.40.0. | ||||
| CVE-2026-46380 | 1 Oscal-compass | 1 Compliance-trestle | 2026-08-17 | 6.7 Medium |
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the HTTPSFetcher._do_fetch() method passes a user-supplied URL directly to requests.get() without validation. This allows an attacker to perform Server-Side Request Forgery, targeting internal services or cloud metadata endpoints. Versions 3.12.2 and 4.0.3 fix the issue. | ||||
| CVE-2026-18385 | 2 Properfraction, Wordpress | 2 Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content – Profilepress, Wordpress | 2026-08-17 | 5.4 Medium |
| The The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content – ProfilePress plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 4.16.19. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes. The partial mitigation introduced via strip_shortcodes() on [profile-first-name] and [profile-last-name] can be bypassed through the [profile-display-name format="first_last_names"] render path, the [profile-bio] render path (which re-fetches the raw description meta), and the double-bracket escape sequence [[tag]], all of which allow attacker-controlled shortcode text to reach the outer do_shortcode() call. | ||||
| CVE-2026-17581 | 2 Kilbot, Wordpress | 2 Wcpos – Point Of Sale (pos) Plugin For Woocommerce, Wordpress | 2026-08-17 | 7.2 High |
| The WCPOS – Point of Sale (POS) plugin for WooCommerce plugin for WordPress is vulnerable to Code Injection via the 'thermal' Template Engine in all versions up to, and including, 1.9.14 due to the Receipt_Renderer_Factory dispatching templates with the 'thermal' engine to the Legacy_Php_Renderer instead of a safe thermal-specific renderer. This makes it possible for authenticated attackers, with Shop Manager-level access and above, to inject arbitrary PHP code into a template post that is subsequently written to a temporary file and executed via PHP's include(), resulting in remote code execution on the server. This requires the attacker to have Shop Manager-level access or above, as the template save path enforces a wcpos_template_settings nonce and the manage_woocommerce_pos capability check. | ||||
| CVE-2026-64143 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: uniwill-laptop: Do not enable the charging limit even when forced It seems that on some older models (~2020) the battery charging limit can permanently damage the battery. Prevent users from enabling this feature thru the "force" module parameter to avoid causing permanent hardware damage on such devices. | ||||
| CVE-2026-69223 | 1 Apache | 1 Allura | 2026-08-17 | 9.1 Critical |
| Apache Allura's webhooks are vulnerable to Server-Side Request Forgery (SSRF). This issue affects Apache Allura: before 1.19.1. Users are recommended to upgrade to version 1.19.1, which fixes the issue. | ||||
| CVE-2026-42537 | 1 Apache | 1 Ranger | 2026-08-17 | 9.8 Critical |
| Remote Code Execution via JDBC URL Injection in Apache Ranger <= 2.8.0 Users are recommended to upgrade to version 2.9.0, which fixes this issue. | ||||
| CVE-2026-13700 | 2026-08-17 | 5.9 Medium | ||
| The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled. | ||||