| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A NULL pointer dereference flaw was found in vmxnet3_rq_cleanup in drivers/net/vmxnet3/vmxnet3_drv.c in the networking sub-component in vmxnet3 in the Linux Kernel. This issue may allow a local attacker with normal user privilege to cause a denial of service due to a missing sanity check during cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks. |
| A flaw was found within the parsing of SMB2 requests that have a transform header in the kernel ksmbd module. The issue results from the lack of proper validation of user-supplied data, which can result in a read past the end of an allocated buffer. An attacker can leverage this to disclose sensitive information on affected installations of Linux. Only systems with ksmbd enabled are vulnerable to this CVE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: don't downgrade half-dead scalar zero spills to STACK_ZERO
states.c:__clean_func_state() can downgrade scalar zero spill to
STACK_ZERO in the following case:
*(u64 *)(r10 - 8) = 0;
... checkpoint ...
r1 = *(u32 *)(r10 - 4);
... no reads from r10-8 ...
Here 4 bytes at r10-8 are dead and verifier changes scalar spill to a
combination: 0000pppp (p stands for poison). Such a change breaks
precision propagation chains. All places that produce STACK_ZERO
should call bpf_mark_chain_precision() for the zero source.
This patch fixes the bug in a simplest way possible:
avoids converting stack spills of zero to STACK_ZERO.
Two smarter approaches are possible:
- do bpf_mark_chain_precision() from __clean_func_state()
- check slot liveness information in check_stack_write_fixed_off()
I investigated both and the changes required are a bit tricky,
hence go with a simple fix for the time being. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check A-MSDU format more carefully
If it looks like there's another subframe in the A-MSDU
but the header isn't fully there, we can end up reading
data out of bounds, only to discard later. Make this a
bit more careful and check if the subframe header can
even be present. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid sectors_per_cluster in the boot sector
is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field
with a range test that rejects 0x81..0xf3 but accepts 0 and other
non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector():
sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1;
...
vol->cluster_size = vol->sector_size << sectors_per_cluster_bits;
ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the
shift is undefined:
UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39
shift exponent 4294967295 is too large for 32-bit type 'int'
This change rejects any non-power-of-two value, since it feeds the
aforementioned shift via ffs() - 1, which only yields the correct shift for a
power of two. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound $AttrDef table walk to the loaded table size
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: treat any nonzero dio zero-range return as an error
ntfs_dio_zero_range() returns either 0 or a negative errno from
blkdev_issue_zeroout(); it never returns a positive value. The
zeroing failure check in ntfs_attr_fallocate() therefore never fired,
so a failed zeroing operation was silently ignored: the loop kept
going, the newly allocated clusters were folded into initialized_size
and the write could succeed leaving stale on-disk data.
Treat any nonzero return as an error and abort the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: do not mark the volume clean in sync_fs when errors were recorded
ntfs_put_super() and the remount-read-only path both clear the dirty bit
only when NVolErrors(vol) is false. ntfs_sync_fs() clears it
unconditionally, so any sync() on a volume that recorded an error marks
that volume clean. A volume without this set is then seen as not needing
recovery and it does not run one, so whatever went wrong is never repaired.
This change skips resetting the dirty bit when there are volume errors.
Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the
error flag while leaving the mount read-write: after a write and a sync,
the on-disk volume flags read 0x0000 with this driver and 0x0001 with the
guard in place. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: only count successfully cleared runs when freeing clusters
ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed
whenever the error bookkeeping condition is false, which includes
cases where ntfs_bitmap_clear_run() actually failed - e.g. a second
run failing with the same errno as an earlier one, or any failure
after a non-ENOMEM error was already recorded. Since a failed
ntfs_bitmap_clear_run() rolls back its partial modifications, no
bits were cleared for that run, yet its length still inflates
vol->free_clusters, corrupting statfs output and the allocator's
free space gate.
Only count runs whose bitmap clear succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in sysfs path
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in netlink path
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac87 ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: refuse to enslave CAN devices
syzbot reported a kernel paging request crash in
can_rx_unregister() inside net/can/af_can.c. The crash occurs
because a virtual CAN device (vxcan) is being enslaved to a
bonding master.
During the enslavement process, the bonding driver mutates
and modifies the network device states to fit an Ethernet-like
aggregation model. However, CAN devices operate on a completely
different Layer 2 architecture, relying on the CAN mid-layer
private data structure (can_ml_priv) instead of standard
Ethernet structures. Since bonding does not initialize or
maintain these CAN structures, subsequent operations on the
half-enslaved interface (such as closing associated sockets
via isotp_release) lead to a null-pointer dereference when
accessing the CAN receiver lists.
Bonding CAN interfaces is architecturally invalid as CAN lacks
MAC addresses, ARP capabilities, and standard Ethernet
link-layer mechanisms. While generic loopback devices are
blocked globally in net/core/dev.c, virtual CAN devices
bypass this check because they do not carry the IFF_LOOPBACK
flag, despite acting as local software-loopbacks.
Fix this by explicitly blocking network devices of type
ARPHRD_CAN from being enslaved at the very beginning of
bond_enslave(). This prevents illegal state mutations,
eliminates the resulting KASAN crashes, and avoids potential
memory leaks from incomplete socket cleanups.
As the CAN support has been added a long time after bonding
the Fixes-tag points to the introduction of ARPHRD_CAN that
would have needed a specific handling in bonding_main.c. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails. |
| A flaw was found in the Linux kernels implementation of audit rules, where a syscall can unexpectedly not be correctly not be logged by the audit subsystem |
| A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. |
| Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28. |
