Export limit exceeded: 412630 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23766 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68440 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix heap overflow when reading module EEPROM txgbe_read_eeprom_hostif() always copies round_up(length, 4) bytes into the caller buffer, which ethtool allocates with exactly 'length' bytes. A non-4-aligned length therefore causes an out-of-bounds write. Copy only the remaining bytes on the final dword instead. | ||||
| CVE-2026-68401 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit() Sashiko (locally) reports multiple out-of-bound issues in ffa_setup_and_transmit: 1) Writing ep_mem_access->reserved can write out of bounds for FFA versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case while reserved has an offset of 24. Instead of zeroing fields, memset the struct to zero first based on the FFA version. 2) Make sure there is enough size to write constituents. While at it, convert the only sizeof() in the driver that uses a type instead of variable. | ||||
| CVE-2026-68262 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix user array stride in pvr_set_uobj_array() pvr_set_uobj_array() copies an array of kernel objects to a userspace array whose element size is described by out->stride. When out->stride is different from the kernel object size, the slow path advances the userspace pointer by the kernel object size and the kernel pointer by the userspace stride. This reverses the intended layout. For larger userspace strides, later copies read from the wrong kernel addresses. For smaller userspace strides, later copies are written at the wrong userspace offsets. The padding clear is also done only for the first element instead of the padding area for each element. Advance the userspace pointer by out->stride and the kernel pointer by obj_size, and clear per-element padding while the current userspace pointer is still available. | ||||
| CVE-2026-68230 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: media: amlogic-c3: Add validations for ae and awb config Avoid invalid memory access if the zones_num is bigger than zone_weight. This patch fixes the following smatch errors: drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max | ||||
| CVE-2026-16871 | 1 Ibm | 1 I | 2026-08-13 | 4.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to a heap buffer overflow. | ||||
| CVE-2026-72862 | 1 Dokploy | 1 Dokploy | 2026-08-13 | 9.9 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the mariadb.ts, mongo.ts, mysql.ts, postgres.ts, redis.ts, and libsql.ts Dokploy database service deployment functions pass user-controlled dockerImage fields unquoted into docker pull ${dockerImage} shell commands on the remote-server code path. This vulnerability is fixed in 0.29.13. | ||||
| CVE-2026-64273 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - bound the device-reported force-feedback effect index iforce_process_packet() handles a status report (packet id 0x02) by taking a force-feedback effect index straight from the device wire and using it to address the per-effect state array: i = data[1] & 0x7f; if (data[1] & 0x80) { if (!test_and_set_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) ... } else if (test_and_clear_bit(FF_CORE_IS_PLAYED, iforce->core_effects[i].flags)) { ... } The index is masked only with 0x7f, so it ranges 0..127, but core_effects[] holds only IFORCE_EFFECTS_MAX (32) entries. For an index of 32..127 the test_and_set_bit()/test_and_clear_bit() is an out-of-bounds single-bit read-modify-write past the array. core_effects[] is the second-to-last member of struct iforce, so the write lands in the trailing members and beyond the embedding kzalloc()'d iforce_serio / iforce_usb object. data[1] is unvalidated device payload on both transports (the USB interrupt endpoint and serio), and the status path is not gated on force feedback being present, so a malicious or counterfeit device can set or clear a bit at an attacker-chosen offset past the object. Reject an out-of-range index instead of indexing with it. Bound against the array dimension IFORCE_EFFECTS_MAX rather than dev->ff->max_effects so the check guarantees memory safety regardless of how many effects the device registered. A legitimate "effect started/stopped" status always carries an index below IFORCE_EFFECTS_MAX, so well-formed devices are unaffected; the neighbouring mark_core_as_ready() loop is already bounded and is left untouched. | ||||
| CVE-2026-64274 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: goodix - clamp the device-reported contact count goodix_ts_read_input_report() copies the number of touch points reported by the device into an on-stack buffer u8 point_data[2 + GOODIX_MAX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; which is sized for at most GOODIX_MAX_CONTACTS (10) contacts. The only runtime check bounds the per-interrupt count against ts->max_touch_num, but that value is taken verbatim from a 4-bit field of the device configuration block and is never clamped: ts->max_touch_num = ts->config[MAX_CONTACTS_LOC] & 0x0f; The nibble can be 0..15, so a malfunctioning, malicious or counterfeit controller (or an attacker tampering with the I2C bus) can advertise up to 15 contacts. goodix_ts_read_input_report() then accepts a touch_num of up to 15 and the second goodix_i2c_read() writes ts->contact_size * (touch_num - 1) bytes past the one-contact header into point_data - up to 30 bytes (45 with the 9-byte report format) beyond the 92-byte buffer: a stack out-of-bounds write. Clamp max_touch_num to GOODIX_MAX_CONTACTS, the number of contacts point_data[] is sized for, when reading it from the configuration. | ||||
| CVE-2026-72882 | 1 Dokploy | 1 Dokploy | 2026-08-13 | 9.9 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). In 0.28.8 and earlier, an authenticated user who can create or update file mounts for a service can inject shell metacharacters into filePath, causing Dokploy to execute attacker-controlled commands on the configured remote managed server over SSH. In the default deployment model, this yields direct remote host RCE from the web interface. | ||||
| CVE-2026-72872 | 1 Dokploy | 1 Dokploy | 2026-08-13 | 9.9 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, application.saveBitbucketProvider stores bitbucketOwner and bitbucketRepository without validation and cloneBitbucketRepository in packages/server/src/utils/providers/bitbucket.ts interpolates those values into git clone commands executed through execAsync or execAsyncRemote, allowing a member with service deployment permission to execute arbitrary operating system commands on the Dokploy host or target server. This issue is fixed in version 0.29.13. | ||||
| CVE-2026-48362 | 1 Adobe | 3 Coldfusion, Coldfusion 2023, Coldfusion 2025 | 2026-08-13 | 10 Critical |
| ColdFusion is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-48385 | 1 Adobe | 3 Coldfusion, Coldfusion 2023, Coldfusion 2025 | 2026-08-13 | 7.7 High |
| ColdFusion is affected by an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability that could result in a Security feature bypass. A low-privileged attacker could leverage this vulnerability to bypass security measures and gain unauthorized write access. Exploitation of this issue does not require user interaction. Scope is changed. | ||||
| CVE-2026-16956 | 1 Ibm | 1 Db2 Mirror For I | 2026-08-13 | 9.8 Critical |
| IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-17218 | 1 Ibm | 1 I | 2026-08-13 | 9.8 Critical |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to execute arbitrary code due to an out-of-bounds write. | ||||
| CVE-2026-17248 | 1 Ibm | 1 I | 2026-08-13 | 7.1 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to improper neutralization of special elements in an OS command. | ||||
| CVE-2026-18235 | 1 Ibm | 1 I | 2026-08-13 | 8.3 High |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary Control Language commands due to insufficient input validation. | ||||
| CVE-2026-17420 | 1 Ibm | 1 I | 2026-08-13 | 6.3 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to bypass security restrictions due to improper neutralization of special elements in an SQL parameter. | ||||
| CVE-2026-72901 | 1 Dokploy | 1 Dokploy | 2026-08-13 | 9.9 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, Dokploy allows an authenticated low-privilege member to execute arbitrary commands on the control-plane host because the volumeName field accepted by volumeBackup.create and volumeBackup.runManually is interpolated without quoting in packages/server/src/utils/volume-backups/backup.ts and executed through child_process.exec, with Docker socket access making execution host/root-equivalent. This issue is fixed in version 0.29.13. | ||||
| CVE-2026-72877 | 1 Dokploy | 1 Dokploy | 2026-08-13 | 9.6 Critical |
| Dokploy is a free, self-hostable Platform as a Service (PaaS). Prior to 0.29.13, the dockerImage field is interpolated without quoting into shell commands in buildRemoteDocker() in packages/server/src/utils/providers/docker.ts and is validated only as an optional string. An authenticated user with application create or update permission can use shell command substitution in dockerImage to execute arbitrary commands on the local build host or a remote SSH build target, exposing host secrets and other projects. This issue is fixed in version 0.29.13. | ||||
| CVE-2026-68806 | 1 Microsoft | 10 365 Apps, Excel, Excel 2016 and 7 more | 2026-08-13 | 7.8 High |
| Out-of-bounds write in Microsoft Office Excel allows an unauthorized attacker to execute code locally. | ||||