| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi_tcp: Check the data direction of a Data-In PDU
The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task
and copies the PDU's data segment into that command's scatterlist without
asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same
file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE.
A target that answers a WRITE command's ITT with a Data-In therefore has
the initiator write target-supplied bytes into the pages that write was
about to send. Those are the caller's own pinned pages for an O_DIRECT
write, and page cache pages for a buffered one.
Observed against a test target that emits one 512-byte Data-In naming a 128
KB write's ITT, after the R2T for that write. With O_DIRECT the caller's
buffer ends up holding 512 bytes of the target's data while pwrite()
returns 131072. Buffered is quieter: pwrite() and fsync() both succeed,
nothing is logged, and reading those blocks back returns the target's bytes
out of the page cache without a command going on the wire.
Check the direction before using the scatterlist, the way the R2T path
already does. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: skip expired catchall elements on insert and delete
nft_setelem_catchall_insert() looks up duplicates with
nft_set_elem_active() only, while nft_set_catchall_lookup() and the
dump path additionally skip expired elements.
Once a catchall element with a timeout expires, this predicate drift
makes it invisible to userspace dumps, yet it still blocks
re-insertion: with NLM_F_EXCL the request fails with -EEXIST, and
without it the request reports success but silently inserts nothing.
The stale entry only goes away when the (user-tunable) gc interval
elapses, so the catchall rule may silently stop matching for an
arbitrarily long time after its first expiration.
The delete path shows the same drift: nft_setelem_catchall_deactivate()
picks the first active-next entry in the catchall list, so with an
expired entry still pending GC it retires the stale entry instead of
the fresh one, and it deactivates an element that userspace no longer
sees instead of failing with -ENOENT.
Align both walks with the lookup and dump predicates: only an element
that is active and not expired counts as a duplicate or delete
candidate, using the per-netns timestamp taken at transaction start,
in line with the set backend .insert/.deactivate and catchall GC sync
paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read
rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0
even when address matching (IP6T_RT_FST_MASK) is requested.
In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing
addresses against rtinfo->addrs[i] and terminates backwards at the bottom
of the loop:
if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) {
i++;
}
if (i == rtinfo->addrnr)
break;
When addrnr is 0, if the first packet address matches rtinfo->addrs[0],
i is incremented to 1. Because i is now strictly greater than addrnr (0),
the loop termination condition (i == rtinfo->addrnr) is bypassed and will
never be satisfied.
If a crafted IPv6 packet contains matching routing addresses, i will
advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal()
reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings
or kernel panics.
Fix this by:
1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but
rtinfo->addrnr is zero.
2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr)
into the for-loop header condition and removing the backwards break
at the end of the loop body. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was captured with a full trace
elsewhere:
atl1c 0000:05:00.0 enp5s0f0: NETDEV WATCHDOG: CPU: 4: transmit queue 2 timed out 489984 ms
atl1c 0000:05:00.0: MAC state machine can't be idle since disabled for 10ms second
atl1c 0000:05:00.0: atl1c: enp5s0f0 NIC Link is Up<65535 Mbps Full Duplex>
65535 (0xffff) here is the same value tpd_cons reads back once the
loop below gets stuck.
- Proxmox VE, kernel 7.0.14-11-pve. Same NIC/trigger, this time
caught by the soft lockup watchdog with a full stack trace:
watchdog: BUG: soft lockup - CPU#12 stuck for 354s! [napi/eth%d-0:329]
CPU: 12 UID: 0 PID: 329 Comm: napi/eth%d-0 Tainted: P O L 7.0.14-11-pve #1 PREEMPT(lazy)
RIP: 0010:atl1c_clean_tx+0x142/0x2d0 [atl1c]
Call Trace:
<TASK>
__napi_poll+0x32/0x1e0
napi_threaded_poll_loop+0x286/0x2e0
napi_threaded_poll+0xfd/0x140
kthread+0xf7/0x130
ret_from_fork+0x2da/0x3a0
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY_SOURCE this is
reported as a field-spanning write and, when the kernel is booted with
panic_on_warn=1, aborts boot with a panic.
Route the optional options through a common helper that makes sure the
option, its 2-byte header and the END marker all fit and drops an option
that would not. Configurations with short options keep sending exactly
the same bytes as before. |
| Out-of-bounds read in Windows Routing and Remote Access Service (RRAS) allows an unauthorized attacker to disclose information over a network. |
| Photoshop Desktop is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| libp2p-rust is the official Rust language implementation of the libp2p networking stack. Prior to 0.49.5, Gossipsub GRAFT control-message handling unconditionally adds attacker-supplied topic hashes to connected_peer.topics without confirming that the peer previously subscribed to those topics. A remote unauthenticated peer that can reach a Gossipsub listener can repeatedly send novel GRAFT topics, causing cumulative per-peer memory growth that is not bounded by subscription filters, peer scoring, or per-message size limits. This can exhaust process memory and cause a denial of service. This issue is fixed in version 0.49.5. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-oxp: use cancel_delayed_work_sync() in remove
oxp_hid_remove() uses cancel_delayed_work() for all three delayed work
items. cancel_delayed_work() only dequeues a pending work item without
waiting for a currently executing callback to finish. If any of the
work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is
running at the time of removal, the callback continues executing
concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID
device after it has been closed and stopped.
Use cancel_delayed_work_sync() instead to ensure that any in-progress
work callback completes before device teardown proceeds. |
| A flaw was found in curl. When importing HTTP Strict Transport Security (HSTS) cache records, loading a parent domain entry configured to include subdomains before a longer-lived subdomain entry silently drops the subdomain policy. Consequently, once the parent policy expires, curl fails to upgrade subsequent connections for the subdomain to HTTPS and transmits unencrypted requests, allowing a network attacker to intercept sensitive data. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix AArch32 DBGBXVR<n> handling
The consolidation of the breakpoint and watchpoint register accessors
switched DBGBXVR<n> from trap_bvr() to trap_dbg_wb_reg(). The latter
selects backing storage with demux_wb_reg(), which only handles Op2 values
4 through 7. Since DBGBXVR<n> uses Op2 1, an AArch32 guest access hits
KVM_BUG_ON() and marks the VM dead.
DBGBXVR<n> aliases DBGBVR<n>_EL1[63:32], and its AA32(HI) descriptor
already selects the upper half. Map Op2 1 to dbg_bvr[] alongside Op2 4,
restoring the pre-regression behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Free have_run_cpus during VM destruction even if VM is no longer SEV
Unconditionally free SEV's "have run CPUs" cpumask in the VM destroy path,
i.e. even for what appear to be non-SEV VMs, as an SEV VM becomes a non-SEV
VM if its state is intra-host migrated. Alternatively, the mask could be
freed in sev_migrate_from() when "converting" the source VM, but that gets
annoying because ideally KVM would nullify the mask to guard against UAF,
and nullifying the mask would need be conditioned on CPUMASK_OFFSTACK=y.
Freeing the mask during sev_migrate_from() is also not robust against other
KVM bugs, though that's kind of a moot point since any such bugs would show
up even if sev->active is never set. I.e. KVM must get that side of things
correct. But, that's not a great reason to add more code just to make
things marginally less robust. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: fix KVM GISC and page leak when queue removed from host config
Three related problems exist in the handling of KVM interrupt and page
resources when a queue is removed from the host's AP configuration
while assigned to a mediated device (mdev).
Problem 1:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in vfio_ap_mdev_reset_queue()
When the AP bus removes a queue device whose adapter or domain has
been removed from the host's AP configuration,
vfio_ap_mdev_remove_queue() is called. If the queue is still in the
host's AP configuration at that point, it calls
vfio_ap_mdev_reset_queue(), which issues a PQAP(ZAPQ). Since the
adapter is already gone from the host configuration, ap_zapq() returns
AP_RESPONSE_Q_NOT_AVAIL (0x01). This response code is not handled in
vfio_ap_mdev_reset_queue()'s switch statement and falls through to
the default case, which issues a WARN but does not call
vfio_ap_free_aqic_resources(). As a result, if IRQ handling was
enabled for the queue by the guest, the KVM GISC registration and
the pinned guest page holding the notification indicator byte (NIB)
are both leaked.
This is fixed by adding AP_RESPONSE_Q_NOT_AVAIL to the same case as
AP_RESPONSE_DECONFIGURED and AP_RESPONSE_CHECKSTOPPED in
vfio_ap_mdev_reset_queue(). Like those response codes, Q_NOT_AVAIL
indicates the queue is not operational and no further reset attempts
are possible; the correct action is to free the IRQ resources
immediately.
Problem 2:
~~~~~~~~~
AP_RESPONSE_Q_NOT_AVAIL not handled in apq_status_check()
In vfio_ap_mdev_reset_queue(), there are four cases that indicate a queue
reset has not yet completed, in which case apq_reset_check() is queued to
a work queue to verify completion of the reset operation. This function
uses the PQAP(TAPQ) function to get the queue's status and calls
apq_status_check() to verify whether the reset has completed, failed or
needs to be executed again. As described in Problem #1 above,
apq_reset_check() does not specifically check for AP_RESPONSE_Q_NOT_AVAIL,
thereby potentially leaking KVM GISC registration and the pinned guest page
holding the NIB.
This is fixed by adding a case statement for AP_RESPONSE_Q_NOT_AVAIL to
apq_status_check() and returning -ENODEV for that case. The caller,
apq_reset_check() will then check for this return code and call
vfio_ap_free_aqic_resources() to prevent the leak.
Problem 3:
~~~~~~~~~
vfio_ap_free_aqic_resources() leaks saved_isc when kvm is NULL
vfio_ap_free_aqic_resources() guards the call to
kvm_s390_gisc_unregister() with:
if (q->saved_isc != VFIO_AP_ISC_INVALID &&
!WARN_ON(!(q->matrix_mdev && q->matrix_mdev->kvm)))
If matrix_mdev->kvm is NULL -- which can happen when
vfio_ap_mdev_unset_kvm() has already run and cleared kvm before a
subsequent cleanup path reaches this function -- the WARN_ON fires
and the entire block is skipped. This leaves q->saved_isc set to a
non-invalid value, creating a potential double-free on any subsequent
call to this function.
When kvm is NULL the KVM guest is already torn down, so
kvm_s390_gisc_unregister() need not and cannot be called; however,
q->saved_isc must always be cleared. Fix this by separating the
kvm_s390_gisc_unregister() call from the q->saved_isc reset. The
WARN_ON now guards only the genuinely impossible case of matrix_mdev
being NULL. A NULL kvm is handled gracefully by skipping only the
unregister call, and q->saved_isc = VFIO_AP_ISC_INVALID is set
unconditionally whenever saved_isc was not already invalid.
Additionally, add an else clause to the host-config check in
vfio_ap_mdev_remove_queue() to call vfio_ap_free_aqic_resources()
directly when the queue is not in the host's AP configuration. This
serves as a backstop: when the AP bus fires the driver .remove
callback after an adapter is removed from the host config, the queue
is by definition no longer addressable, so vfio_ap_mdev_reset_queue
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix missing device lock in zpci_report_status()
When pdev is non-NULL, zpci_report_status() accesses the device's driver.
To get a consistent state matching the recovery, the device lock needs to
be held. Do so by expanding the existing device lock critical section.
The lock only needs to be held when the pdev is non-NULL, so extract
the pdev-specific reporting into a helper function which also adds a
lockdep assertion to detect calls without the device lock held. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cmf: Fix virtual vs physical address confusion
The measurement block address is an absolute address. Define the
associated schib_config and schib fields as dma64_t to enable automatic
detection of incorrect assignments. Also add the missing virt_to_dma64()
translation.
Without this fix, a wrong address will be used by firmware when storing
extended format channel measurement data on kernels built with
CONFIG_RANDOMIZE_IDENTITY_BASE=y. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix NULL pmu_ctx passed to pmu->sched_task()
perf_pmu_sched_task() returns early when cpuctx->task_ctx is set, and
cpc->task_epc is only non-NULL while a task context is scheduled in on
this CPU. __perf_pmu_sched_task() therefore always passes NULL:
Unable to handle kernel NULL pointer dereference at virtual address 00
pc : armv8pmu_sched_task+0x14/0x50
Call trace:
armv8pmu_sched_task+0x14/0x50 (P)
perf_pmu_sched_task+0xac/0x108
__perf_event_task_sched_out+0x6c/0xe0
Pass &cpc->epc instead, the CPU-wide context for this PMU, which the
function already dereferences a few lines up to find pmu.
armv8pmu_sched_task() is the only in-tree implementation that
dereferences the argument, and it only reads ->pmu, so the oops needs
BRBE, added in v6.17. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Keep internal commands dispatchable during error handling
Commit 08b12cda6c44 ("scsi: ufs: core: Switch to scsi_get_internal_cmd()")
switched UFS internal commands to allocate requests on
hba->host->pseudo_sdev->request_queue, which shares the host tagset with
regular LUNs.
During error recovery, ufshcd_err_handling_prepare() calls
blk_mq_quiesce_tagset(&hba->host->tag_set), marking all queues in the
tagset as quiesced, including pseudo_sdev->request_queue. When
ufshcd_verify_dev_init() subsequently issues internal commands (e.g. NOP
OUT UPIU) via blk_execute_rq(), blk_mq_run_hw_queue() skips running the
quiesced queue, resulting in an unrecoverable circular wait deadlock.
Keep quiescing the tagset and unquiesce the pseudo SCSI device on top of
that, so internal commands stay dispatchable while the logical units remain
quiesced. Re-quiesce the pseudo device before unquiescing the tagset so
that quiesce_depth stays balanced.
Clock scaling and ufshcd_pause_command_processing() are unaffected: they
keep quiescing the whole tagset, internal commands included. |
| SparkyFitness is a self-hosted, AI-powered health and fitness tracker for families. Prior to 1.6.0, the api/admin/backup/restore endpoint interpolates an uploaded filename into a shell command. An authenticated global administrator uploads a restore archive with a crafted filename. The administrator can supply a restore archive with a filename containing shell metacharacters. Successful exploitation can execute arbitrary operating-system commands with the server process privileges. This issue is fixed in version 1.6.0. |
| A flaw was found in curl. A remote malicious server can trigger a denial of service (DoS) in cookie handling by providing an overly long cookie name and value that exceeds curl's line-length limit when saved to a cookie file. Subsequent curl operations reading from this cookie file silently abort parsing upon encountering the oversized entry, causing all remaining valid cookies in the file to be ignored. |
| A flaw was found in curl. A remote malicious server can cause a Denial of Service (DoS) or memory corruption in applications that enable File Transfer Protocol (FTP) wildcard matching. When a wildcard listing operation fails, curl does not properly reset its internal callback handlers before the connection handle is reused or duplicated. An application that subsequently reuses or clones this corrupted handle may experience an immediate application crash or unsafe memory access. |
