| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: dummy: fix UMP event stack overread
The dummy sequencer port forwards events by copying an incoming
struct snd_seq_event into a stack temporary, rewriting source and
destination, and dispatching the temporary to subscribers. That legacy
event storage is smaller than struct snd_seq_ump_event.
When a UMP event reaches the dummy client, the copy leaves the UMP flag
set but only provides legacy-sized stack storage. The subscriber
delivery path then uses snd_seq_event_packet_size() and copies a
UMP-sized packet from that stack object, reading past the end of the
temporary.
Use the existing union __snd_seq_event storage and copy the packet size
reported for the incoming event before rewriting the common routing
fields. This preserves the full UMP packet for UMP events while keeping
legacy event handling unchanged. |
| Out-of-bounds heap read during SM2/SM3 certificate signature verification. When parsing a certificate with an SM3wSM2 signature, the Subject Key Identifier computation reads the trailing 65 bytes of the public key without checking that the key is at least that long. A public key shorter than 65 bytes results in an out-of-bounds heap read, leading to a potential crash (denial of service); there is no out-of-bounds write. Note this only affects builds with SM2 support (--enable-sm2 or --enable-all). |
| Multiple out-of-bounds read vulnerabilities were found in GStreamer's pcapparse element. Malformed PCAP records can trigger reads beyond buffer boundaries during IPv4/TCP header parsing. This element is primarily used in debugging pipelines, limiting real-world exposure. A local attacker could trick a user into processing a specially crafted PCAP file, potentially leading to a crash or information disclosure. |
| In EmberZNet v9.0.2 and earlier, malformed global ZCL messages can trigger out-of-bounds reads in framework parsing logic and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. |
| In EmberZNet v9.0.2 and earlier, malformed OTA requests can drive the OTA server parser into out-of-bounds reads. A limited amount of data from RAM is read back to the requester. The size and location of this data is limited. These requests must come from a device that has already joined the network. Only devices supporting the OTA Server cluster may be impacted. |
| In EmberZNet v9.0.2 and earlier, malformed GetGroupMembership commands can trigger repeated reads past the end of the message payload and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Groups cluster may be impacted. |
| In EmberZNet v9.0.2 and earlier, malformed or out-of-range Door Lock user identifiers can trigger out-of-bounds table reads and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Door Lock cluster may be impacted. |
| In EmberZNet v9.0.2 and earlier, a malformed GetProfileResponse message can trigger out-of-bounds reads while iterating interval entries and terminate the process. These messages must come from a device that has already joined the network, and no information leakage back to the sender was observed. Only devices supporting the Simple Metering cluster may be impacted. |
| Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::NodeSet#[] (and its alias #slice) checked the requested index against the node set's bounds using a 32-bit-truncated copy of the index. A large negative index could pass the check and then be used at full width, reading outside the node set's storage. On CRuby this is an out-of-bounds read that typically crashes the process; on JRuby it is not memory-unsafe but returns an incorrect node. This vulnerability is fixed in 1.19.4. |
| A flaw was found in Keycloak's ClientRegistrationAuth component. A remote unauthenticated attacker can exploit this vulnerability by sending a specially crafted POST request with a malformed 'Authorization: Bearer' header to any client registration endpoint. This can lead to an ArrayIndexOutOfBoundsException, causing the server to return an HTTP 500 error and resulting in a Denial of Service (DoS) for the affected service. |
| Vim is an open source, command line text editor. Prior to 9.2.0671, when Vim opens a file encrypted with the VimCrypt~04! or VimCrypt~05!
method (xchacha20poly1305, requires the +sodium feature) whose body is shorter than a single libsodium secretstream header, an unsigned length calculation underflows and a subsequent decryption call reads far past the end of the input buffer, crashing Vim. This vulnerability is fixed in 9.2.0671. |
| Vim is an open source, command line text editor. Prior to 9.2.0670, get_text_props() in src/textprop.c reads a uint16 property count stored inline after a line's text and returns it as the number of 32-byte textprop_T entries that follow. The only check is a floor that guarantees room for a single entry; the count is never checked against the amount of data actually present. A line that declares a large count while carrying little data causes consumers to read far past the end of the line buffer. Such a line can be delivered through a crafted undo file, leading to a crash. This vulnerability is fixed in 9.2.0670. |
| Heap buffer overread in wc_PKCS7_DecodeEnvelopedData when parsing crafted PKCS7 EnvelopedData. This could theoretically be triggered by attacker-supplied data delivered via S/MIME or CMS. |
| Horner Automation Cscape versions prior to 10.2 SP3 are vulnerable to an Out-of-Bounds Read vulnerability through parsing CSP files. Successful exploitation of this vulnerability could allow an attacker to disclose information and execute arbitrary code. |
| ImageMagick before 7.1.2-19 contains an out-of-bounds access vulnerability in ConnectedComponentsImage() when processing connected-components artifacts with invalid indices. Attackers can trigger access violations by specifying malformed connected-components definitions via CLI, causing denial of service or potential code execution. |
| Out of bounds read and write in Blink>InterestGroups in Google Chrome prior to 149.0.7827.197 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
ima_fs: Correctly create securityfs files for unsupported hash algos
ima_tpm_chip->allocated_banks[i].crypto_id is initialized to
HASH_ALGO__LAST if the TPM algorithm is not supported. However there
are places relying on the algorithm to be valid because it is accessed
by hash_algo_name[].
On 6.12.40 I observe the following read out-of-bounds in hash_algo_name:
==================================================================
BUG: KASAN: global-out-of-bounds in create_securityfs_measurement_lists+0x396/0x440
Read of size 8 at addr ffffffff83e18138 by task swapper/0/1
CPU: 4 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.40 #3
Call Trace:
<TASK>
dump_stack_lvl+0x61/0x90
print_report+0xc4/0x580
? kasan_addr_to_slab+0x26/0x80
? create_securityfs_measurement_lists+0x396/0x440
kasan_report+0xc2/0x100
? create_securityfs_measurement_lists+0x396/0x440
create_securityfs_measurement_lists+0x396/0x440
ima_fs_init+0xa3/0x300
ima_init+0x7d/0xd0
init_ima+0x28/0x100
do_one_initcall+0xa6/0x3e0
kernel_init_freeable+0x455/0x740
kernel_init+0x24/0x1d0
ret_from_fork+0x38/0x80
ret_from_fork_asm+0x11/0x20
</TASK>
The buggy address belongs to the variable:
hash_algo_name+0xb8/0x420
Memory state around the buggy address:
ffffffff83e18000: 00 01 f9 f9 f9 f9 f9 f9 00 01 f9 f9 f9 f9 f9 f9
ffffffff83e18080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffff83e18100: 00 00 00 00 00 00 00 f9 f9 f9 f9 f9 00 05 f9 f9
^
ffffffff83e18180: f9 f9 f9 f9 00 00 00 00 00 00 00 04 f9 f9 f9 f9
ffffffff83e18200: 00 00 00 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 f9
==================================================================
Seems like the TPM chip supports sha3_256, which isn't yet in
tpm_algorithms:
tpm tpm0: TPM with unsupported bank algorithm 0x0027
That's TPM_ALG_SHA3_256 == 0x0027 from "Trusted Platform Module 2.0
Library Part 2: Structures", page 51 [1].
See also the related U-Boot algorithms update [2].
Thus solve the problem by creating a file name with "_tpm_alg_<ID>"
postfix if the crypto algorithm isn't initialized.
This is how it looks on the test machine (patch ported to v6.12 release):
# ls -1 /sys/kernel/security/ima/
ascii_runtime_measurements
ascii_runtime_measurements_tpm_alg_27
ascii_runtime_measurements_sha1
ascii_runtime_measurements_sha256
binary_runtime_measurements
binary_runtime_measurements_tpm_alg_27
binary_runtime_measurements_sha1
binary_runtime_measurements_sha256
policy
runtime_measurements_count
violations
[1]: https://trustedcomputinggroup.org/wp-content/uploads/Trusted-Platform-Module-2.0-Library-Part-2-Version-184_pub.pdf
[2]: https://lists.denx.de/pipermail/u-boot/2024-July/558835.html |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Bound MIDI endpoint descriptor scans
snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint
descriptor size before using baAssocJackID[], but the descriptor walker can
still return a class-specific endpoint descriptor whose bLength exceeds the
remaining bytes in the endpoint-extra scan.
That leaves later flexible-array reads bounded by bLength, but not by the
remaining bytes in the endpoint-extra scan.
Stop walking when bLength is zero or
extends past the remaining endpoint-extra scan. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, ht_undo_impl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The ht_undo_imp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel's declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but ht_undo_impl() does not validate this — it pulls width 32-bit samples from cur_line->i32[] without checking the OpenJPH line buffer's actual length. A crafted EXR file produces a 4-byte heap-buffer-overflow READ immediately after a buffer allocated by ojph::local::codestream::finalize_alloc(). The bug is reachable through the standard scanline-decode entry point used by every consumer of exr_decoding_run/Imf::checkOpenEXRFile, including thumbnailers, asset pipelines, and the exrcheck utility — i.e. any application that opens untrusted EXR files. The result is a deterministic crash (DoS) and potential adjacent-heap leak. This issue has been fixed in version 3.4.12. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to version 1.22.1, the uncompressed HEIF decoder validates explicit icef compressed-unit offsets using unit_offset + unit_size. Because the addition can wrap, a crafted HEIF file can pass the range check and then construct a vector from iterators outside the compressed item buffer, producing an out-of-bounds heap read and crash. Version 1.22.1 patches the issue. |
