| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A segmentation violation in the gf_isom_get_esd function (/isomedia/isom_read.c) of GPAC Project/MP4Box before 2.5 allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. |
| Vyper from 0.2.13 before 0.2.15 allocates storage slots for @nonreentrant reentrancy locks at the same locations as contract storage variables. When a function using @nonreentrant is called, setting the lock overwrites the overlapping storage variable, corrupting contract state and breaking the contract's intended logic. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Rearrange teardown sequence
This fixes a narrow window during the teardown sequence where callbacks
could still be scheduled during cleanup that would then have a dangling
pointer to the now-freed steam struct.
This also puts work canceling for rumble and mode switch in
steam_unregister, as that shouldn't persist while the client hdev is open. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Disable the V3D interrupt across runtime suspend
vc4_irq_disable() masks the V3D interrupt sources and then calls
synchronize_irq() before the V3D is powered down. However, by itself,
this is not enough to quiesce the interrupt handler.
synchronize_irq() waits for handlers that have already set
IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE.
A GIC interrupt chip is able to mark an interrupt active as soon as a
CPU acknowledges it, so there these checks cover the whole dispatch path.
On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no
active state. A CPU that has read the hwirq out of the pending register
but has not yet reached handle_level_irq() stays invisible to
synchronize_irq().
During a power transition, vc4_irq() may therefore run after the power
domain is off, where every V3D register read will return 0xdeadbeef.
0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't
trigger NULL pointer dereference issues only because the functions
vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early
when there is no job pointer, but OUTOMEM is still able to schedule
vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it.
Therefore, fix the spurious interrupts by disabling the interrupt line
across the PM transition. To preserve the enable/disable balance, move
vc4_irq_install() and request the IRQ line disabled before the first
runtime resume. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Fix reference and vm_bo handling in remap()
When a map overlaps part of an existing mapping, pvr_vm_gpuva_remap()
splits the mapping into prev/next parts covering what the request did
not take, instead of creating something new. It gets two things wrong.
- A GEM reference is taken for each part but it's never needed and never
dropped, so it leaks one reference per split (remap-next-in-2m in
tests/imagination/pvr_vm_map.c):
CRITICAL: 33558528 bytes of shmem still held after close
- The parts still belong to the original object being split, but
pvr_vm_gpuva_remap() links them to ctx->gpuvm_bo, the new object's
vm_bo:
prev_va --obj--> BO_A BO_B <--obj-- vm_bo (ctx->gpuvm_bo)
\___________link___________/ (mismatch: BO_A != BO_B)
drm_gpuva_link() catches the mismatch:
WARNING: drivers/gpu/drm/drm_gpuvm.c:2108 at drm_gpuva_link+0x2ec/0x310
drm_WARN_ON(obj != vm_bo->obj)
Call trace:
drm_gpuva_link
pvr_vm_gpuva_remap
__drm_gpuvm_sm_map
pvr_vm_map
pvr_ioctl_vm_map
Link them to op->remap.unmap->va->vm_bo instead.
The locking of the GPUVA lists of the other objects touched by a split is
not addressed here; it is handled by switching the GPUVM to immediate
mode. |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect()
bpf_flow_dissect() sanitizes the offsets returned by the BPF program
with clamp_t(u16, ..., hlen).
If hlen is bigger than 65535, the upper bound is truncated before
the comparison. For instance, with hlen == 65536, both nhoff and
thoff are forced to zero, even if the program returned sane values.
This is the same class of bug as the one fixed in commit 99bda1ecbd56
("flow_dissector: avoid u16 truncation of skb->len when computing
thoff"). That fix does not cover the BPF path, because
__skb_flow_dissect() returns early when a BPF flow dissector
handles the packet.
struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen
to U16_MAX before clamping.
Found by sashiko while reviewing the commit above. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: ptrace: Zero-initialize regset buffers before copyin
user_regset_copyin() only copies `count` bytes, so a PTRACE_SETREGSET
request with a short iov_len leaves the rest of the stack buffer
uninitialized. In riscv_vr_set() that garbage is validated and copied
into the target's vstate, and in riscv_cfi_set() it can be stored as
the target's shadow stack pointer. Zero both buffers, as the get path
already does. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: disable rx napi when removing device
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling rx napi inside mt7915e itself, even through napi rx is
enabled in the mt76 generic code. Disabling it in the mt76 generic code
was previously attempted and reverted because napi was disabled too
late and rx handlers could access freed structures. Note that the tx
side is enabled and disabled by the mt76 generic code.
It is disabled in mt7915_stop_hardware() since, unlike
mt7915_unregister_device(), is it also called in the probe path if an
error happens after rx napi is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: unlock inode and extent in caller when io_uring read extent fails
btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken
the inode shared lock and the extent lock. On failure it used to unlock
in out_fail, and a pages-array allocation failure returned -ENOMEM
without unlocking at all.
Unlock in the caller instead on all failure returns, matching the
copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks
in btrfs_uring_read_finished(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: free iov when btrfs_uring_read_extent() fails
After btrfs_uring_read_extent(), the caller always jumped to out_acct.
That skips kfree(data->iov), which is only correct for -EIOCBQUEUED
where the deferred path owns the iov. On failure, fall through to
out_free instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xilinx: axienet: Free outstanding DMA buffers on dmaengine stop
In the dmaengine path the driver pre-submits RX buffers and holds
in-flight TX buffers whose SKBs are DMA-mapped by the driver and freed
only in the completion callbacks. On ndo_stop() dmaengine_terminate_sync()
aborts these descriptors without running their callbacks, and the driver
then frees only the ring shells, leaking every SKB still owned by the
engine and its DMA mapping on each ifdown. With 128 RX buffers pre-posted
per channel, the mapping leak can eventually exhaust a limited IOMMU
aperture.
Clear the slot's skb in the TX and RX callbacks so a non-NULL skb marks a
slot that still owns a live, DMA-mapped buffer, and on stop unmap and free
every such buffer.
axienet_dma_rx_cb() runs from the DMA tasklet and re-arms the RX ring on
each completion, so it can race axienet_stop(): a completion may submit a
fresh buffer after dmaengine_terminate_sync() has returned, leaving the
channel armed with a buffer the teardown then frees while the engine may
still write into it (dma_release_channel() does not stop it either). Add a
lock that axienet_dma_rx_cb() holds across the @stopping check and the
resubmit, and axienet_stop() holds to set @stopping before terminating.
Once @stopping is set no callback can arm a new buffer, and any armed just
before is aborted by the terminate, so teardown only frees buffers the
engine no longer owns. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: avoid recursive multicast port cleanup
br_multicast_sg_del_exclude_ports() removes automatically added STAR_EXCL
port groups by calling br_multicast_del_pg(). For S,G entries, that
deletion calls back into br_multicast_sg_del_exclude_ports(), so a large
number of STAR_EXCL ports consumes one kernel stack frame per port and can
hit the stack guard page.
Keep the complete port-group deletion path for cleanup, but suppress the
S,G exclude-port cleanup while that helper is already walking the same
entry. Normal deletion callers retain the existing behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: protect clcsock lifetime in smc_getname
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise. |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: guard the ll header push in packet_rcv_spkt()
packet_rcv_spkt() restores the link layer header with
skb_push(skb, skb->data - skb_mac_header(skb));
That subtraction is only meaningful when the device actually has a link
layer header. packet_rcv() and tpacket_rcv() both wrap it in
dev_has_header(), which is also the predicate the block comment at the
top of the file states the restore in terms of; packet_rcv_spkt() does
not. commit d549699048b4 ("net/packet: fix packet receive on L3
devices without visible hard header") introduced the helper and changed
the two call sites, and this one stayed behind.
A device without a visible ll header can leave skb->mac_header at the
0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does:
init_can_skb() sets pkt_type and ip_summed but does not reset the
headers, and commit 9f10374bb024 ("can: remove private CAN skb
headroom infrastructure") dropped the skb_reset_*_header() calls that
used to be there. skb_mac_header() is then 0xFFFF, the length becomes
a large negative number and skb_push() reports it through
skb_under_panic() -- from softirq context, so it is a full system panic
even with panic_on_oops=0:
skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x50/0x60
Call Trace:
<IRQ>
skb_push+0x38/0x40
packet_rcv_spkt+0xe1/0x170
__netif_receive_skb_core.constprop.0+0x7e8/0xd30
...
Kernel panic - not syncing: Fatal exception in interrupt
The socket type is reachable: packet_create() accepts SOCK_PACKET
alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check,
and neither the socket length nor a capability check keeps it away
from a CAN interface.
The missing skb_reset_*_header() calls in init_can_skb() are a
regression in their own right and are being fixed separately, but a
packet socket should not turn a link layer that did not initialise its
mac header into a kernel panic. Guard the push the way the other two
receive paths do.
Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is
the driver RX path: vcan does not reproduce it, because can_send()
resets the headers on the way out. One SOCK_PACKET socket bound to
can0 and one frame written into the line discipline panics an
unpatched kernel with the trace above; the same image with this patch
prints no panic and powers off normally. Both kernels are this tree,
defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-sprd: disable runtime PM on remove
sdhci_sprd_probe() enables runtime PM, while sdhci_sprd_remove() does
not perform the corresponding runtime PM cleanup.
The probe failure path disables runtime PM before disabling the clocks,
but the normal remove path directly disables clocks that are also
managed by the runtime PM callbacks. If the device is runtime
suspended, those clocks may already be disabled.
Resume the device before removal, disable runtime PM and drop the
temporary runtime PM reference before disabling the clocks.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: reject the lmk IV mode with AEAD ciphers
A "capi:" table line that pairs an AEAD cipher with the lmk IV mode,
for example "capi:gcm(aes)-lmk" with the integrity:28:aead option,
causes an oops when it is loaded. lmk sets tfms_count to 64, but
crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey
reads past the end of the tfms_aead array and calls crypto_aead_setkey
on the values it finds there.
lmk exists for compatibility with Loop-AES, which uses CBC, so refuse
it with an AEAD cipher rather than allocate 64 AEAD transforms. The
check cannot go in crypt_iv_lmk_ctr with the other lmk checks, because
the IV constructor runs after crypt_set_key.
Note that this is not a security bug because the memory corruption can
only be triggered by root. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: core: wait for request completion before freeing card
In memstick_alloc_card() and memstick_set_rw_addr(),
wait_for_completion_timeout() is used to wait for device identification
and address configuration requests to complete.
The memstick subsystem does not provide an abort or cancellation
callback in struct memstick_host for in-flight requests. If
wait_for_completion_timeout() expires (for instance, when a USB transfer
or command retry is delayed), memstick_alloc_card() returns an error and
frees the memstick_dev structure via kfree(card).
However, the host controller driver (such as rtsx_usb_ms) is still
running the request asynchronously in worker context. When the transfer
eventually finishes, the driver writes into host->req->data, which
points to memory inside the already freed card structure. This leads to
a KASAN slab-use-after-free write:
BUG: KASAN: slab-use-after-free in ms_read_bytes+0x8fe/0x990
Write of size 1 at addr ffff88813c188079 by task kworker/1:5/5239
Workqueue: events rtsx_usb_ms_handle_req
Call Trace:
ms_read_bytes+0x8fe/0x990 drivers/memstick/host/rtsx_usb_ms.c:450
rtsx_usb_ms_issue_cmd drivers/memstick/host/rtsx_usb_ms.c:477 [inline]
rtsx_usb_ms_handle_req+0x557/0x1a00 drivers/memstick/host/rtsx_usb_ms.c:531
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3560
kthread+0x373/0x450 kernel/kthread.c:436
Allocated by task 1662:
memstick_alloc_card drivers/memstick/core/memstick.c:383 [inline]
memstick_check+0x2c1/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Freed by task 1662:
kfree+0x20c/0x650 mm/slub.c:6792
memstick_alloc_card drivers/memstick/core/memstick.c:420 [inline]
memstick_check+0x72b/0x10d0 drivers/memstick/core/memstick.c:452
process_one_work+0xac7/0x1b10 kernel/workqueue.c:3396
Host controller drivers (rtsx_usb_ms, jmb38x_ms, tifm_ms, r592) already
implement their own hardware and bus timeouts, and callers in
mspro_block and ms_block already rely on wait_for_completion()
unconditionally.
Replace wait_for_completion_timeout() with wait_for_completion() in
memstick_set_rw_addr() and memstick_alloc_card() so that the card
structure is never freed while an asynchronous request is in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: validate deauth frame length before reason access
ieee80211_rx_mgmt_deauth() reads the deauth reason code before checking
that the fixed field is actually present in the received frame.
Validate the deauth frame length first and only then read the reason
code. |
