| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in cockpit-files. A local unprivileged attacker can exploit a race condition during directory creation with owner assignment. By controlling a writable parent directory, the attacker can replace a newly created directory with a symbolic link (symlink) before the ownership change operation (chown) is applied. This allows the attacker to redirect the ownership change to an arbitrary file, potentially leading to information disclosure or unauthorized modification of sensitive files. |
| A flaw was found in cockpit-files. A low-privileged local user can exploit this vulnerability by crafting a directory containing a symbolic link (symlink) and then using the privileged "Paste as owner" function. This allows for arbitrary file ownership changes outside the intended pasted directory, leading to a compromise of data integrity. In some cases, this could also lead to reduced confidentiality if the new ownership grants unauthorized read access. Exploitation requires user interaction to select a non-original owner during the paste operation. |
| A vulnerability was identified in Tencent ncnn up to 44b02dabdcf97499281a4692ebd65bad73dcf8b6. Affected by this vulnerability is the function matmul_transb of the file src/layer/matmul.cpp of the component MatMul. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Contributor Arbitrary File Upload in Creator LMS <= 1.2.21 versions. |
| phpMyFAQ 3.2.0-alpha before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an authentication bypass vulnerability that allows IdP-authenticated users to skip TOTP two-factor authentication through the Keycloak and Entra ID SSO callbacks. Attackers holding a valid or phished IdP identity linked to a 2FA-enabled account can complete the OIDC flow and obtain a fully authenticated session, including administrator accounts. |
| A flaw was found in environment-modules. A local attacker can exploit this vulnerability by placing a maliciously named modulefile in a location visible to the victim's `MODULEPATH`. When the victim uses Bash completion for `module` or `ml` commands, the malicious module name, containing shell metacharacters, is evaluated as a command. This can lead to arbitrary command execution in the completing user's shell, impacting their confidentiality, integrity, and availability. |
| A security flaw has been discovered in diem-project diem up to 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. This issue affects the function dmBaseLinkTag::text of the file dmCorePlugin/lib/view/html/link/dmBaseLinkTag.php of the component dmWidget. Performing a manipulation of the argument text results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach
When the Exynos DSI driver was generalized into samsung-dsim, the TE
GPIO acquisition was switched from gpiod_get_optional() to
devm_gpiod_get_optional() while keeping the matching gpiod_put() calls.
That combination is wrong for a managed descriptor.
However, dropping the puts and keeping the managed get is also wrong:
samsung_dsim_register_te_irq() runs from the DSI host attach callback,
and host detach/reattach can happen without destroying the device that
owns the managed action. A second attach would then request the GPIO
again without having released it.
Switch back to a non-managed gpiod_get_optional() and keep the explicit
gpiod_put() on the request_irq() error path and in
samsung_dsim_unregister_te_irq().
[Luca: remove unnecessary comment] |
| A vulnerability has been found in diem-project diem up to 116974edfb9a5b8bd69cb13586dc62bcdbb485ad. Affected by this vulnerability is the function html of the file dmAdminPlugin/web/js/dmAdminCtrl.js of the component Version Check Service. The manipulation leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6()
skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max
argument and passes the result to __pskb_pull_tail() as a signed int. The
function does not ensure that max is at least skb_headlen(skb).
This can happen while parsing IPv6 extension headers when an skb already
has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data
beyond the linear area, max - skb_headlen(skb) wraps and is converted to a
negative delta. __pskb_pull_tail() then passes that negative length to
skb_copy_bits(), where it can become a very large copy length.
Pass the requested length itself as the pull bound at the three
extension-header call sites, so the delta can no longer go negative. |
| A vulnerability is in Web Server default connection ports under the process name GeoWebServer.exe . |
| In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in the probe error path
before releasing the remaining device resources.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta does not require the current password when changing an account e-mail in the user control panel (UserController::updateData, api/user/data/update), checking only the session and CSRF token. An attacker with a hijacked session can set the e-mail to their own mailbox and use the password-reset flow to take over non-2FA accounts, including superadmin. |
| phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an account enumeration vulnerability that allows unauthenticated attackers to confirm registered display names and emails via a distinct HTTP 409 response. Attackers can submit guest comments to the comment create endpoint with candidate user and mail values to link names to emails for targeted phishing. |
| A weakness has been identified in aircheng-org iWebShop-5 up to 5.16. The impacted element is the function IController::redirect of the file plugins/_userInfo/_userInfo.php of the component Login Redirect. This manipulation of the argument callback causes open redirect. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: port100: reject frames whose declared length exceeds the received data
port100_recv_response() passes the URB transfer buffer to
port100_rx_frame_is_valid(), which checksums le16_to_cpu(frame->datalen)
bytes of frame->data. datalen is a 16-bit field supplied by the device
and is never checked against the number of bytes actually received
(urb->actual_length), so a device reporting a datalen larger than the
received frame makes port100_data_checksum() read out of bounds past the
transfer buffer.
Reject a response whose declared frame size does not fit the received
length before validating it.
Found by 0sec (https://0sec.ai) using automated source analysis; the
missing bound is evident from source. Compile-tested. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix swapped IPv6 IPsec policy masks
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: use d_instantiate_new() in ntfs_create_inode() and murder syzbot's "WARNING in do_new_mount" saga
ntfs_create_inode() creates a new inode via ntfs_new_inode(). It hashes
it with insert_inode_locked() and so it's marked as I_NEW until
unlock_new_inode().
ntfs 3 calls d_instantiate() in between though... Since the dentry was
already hashed by the lookup before the create any path walk finds it
without touching the parent's i_rwsem and so can lock the inode.
If the inode is a directory unlock_new_inode() calls
lockdep_annotate_inode_mutex_key() and marks i_rwsem with the
i_mutex_dir_key class.
That resets the count and the owner of a lock somebody else may already
hold by now...
syzbot has been spamming us with the same godforsaken bug
"WARNING in do_new_mount"
since 2023. I can't take it anymore so I went looking. Afaict, syzbot's
executor chdirs into a freshly mounted ntfs3 image, creates a
directory and then mounts some pseudofs on it. Everytime the mkdir()
takes longer than syzbot waits mount() runs concurrently:
mkdir("./sys") mount(NULL, "./sys", "sysfs")
ntfs_create_inode()
d_instantiate()
user_path_at() finds the dentry
do_lock_mount()
inode_lock(inode)
namespace_lock()
unlock_new_inode()
lockdep_annotate_inode_mutex_key()
init_rwsem(&inode->i_rwsem)
unlock_mount()
inode_unlock(inode)
The mount side then releases a lock that according to the rwsem nobody
holds:
DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && ...):
count = 0x0, magic = 0xffff888043a854e8, owner = 0x0,
curr 0xffff888000244880, list empty
WARNING: CPU: 0 PID: 5346 at kernel/locking/rwsem.c:1368 __up_write
Call Trace:
inode_unlock include/linux/fs.h:877 [inline]
unlock_mount fs/namespace.c:2892 [inline]
do_new_mount_fc fs/namespace.c:3828 [inline]
do_new_mount+0x777/0xa40 fs/namespace.c:3887
On PREEMPT_RT the same thing shows up as
DEBUG_LOCKS_WARN_ON(rt_mutex_owner(lock) != current)
WARNING: kernel/locking/rtmutex_common.h:193 at rt_mutex_slowunlock
The up_write() underflows the reset count. A following inode_lock() on
that directory then never returns. A path walk into the new directory
racing with the mkdir() corrupts the lock the same way via
inode_lock_shared() in lookup_slow().
Switch to d_instantiate_new() and drop the trailing unlock_new_inode().
All error paths bail out before that point with I_NEW still set and
keep using discard_new_inode().
May we never see this fscking bug report again. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fill branch entries with a single assignment
perf_clear_branch_entry_bitfields() clears the bitfields of struct
perf_branch_entry one by one and leaves from/to alone, since callers
overwrite those straight away. The list has to be kept in sync with the
struct by hand and has already fallen behind: new_type and priv were
added to perf_branch_entry and never added here.
Only BRBE writes those two, and neither for every record.
brbe_set_perf_entry_type() leaves new_type alone for a branch type it
does not recognise, and priv is not set for source-only records.
arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a
record reaches userspace with whatever the slot held: uninitialised
kmalloc() data on the first pass over the buffer, the previous record's
values after that. Nothing under arch/x86/events/ writes either field,
so only arm64 is affected.
Assign the whole entry at each site instead. Everything not named is
then zero, and there is no list to keep in sync. The bitfields add up to
exactly 64 bits, so the struct has no padding to leave undefined.
perf_clear_branch_entry_bitfields() has no callers left, so remove it.
perf_entry_from_brbe_regset() assigns an empty literal instead, since it
fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the
explicit spec assignment changes nothing. |
