| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: stm32-dcmipp: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
dcmipp_bytecap_start_streaming() returned -EINVAL when the source
subdevice could not be resolved from the media graph, before
pm_runtime_resume_and_get() and media_pipeline_start() had been called.
The remaining error paths already converge on the err_buffer_done
label, which calls dcmipp_bytecap_all_buffers_done(...,
VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate
err_pm_put / err_media_pipeline_stop labels are skipped, which is
correct because nothing they would undo has happened yet.
This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo:
Return queued buffers on start_streaming() failure"). |
| In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix cleanup bugs in vivid_init()
When platform_device_register() fails in vivid_init(), the embedded
struct device in vivid_pdev has already been initialized by
device_initialize(), but the failure path jumps to free_output_strings
without dropping the device reference for the current platform device:
vivid_init()
-> platform_device_register(&vivid_pdev)
-> device_initialize(&vivid_pdev.dev)
-> setup_pdev_dma_masks(&vivid_pdev)
-> platform_device_add(&vivid_pdev)
This leads to a reference leak when platform_device_register() fails.
Fix this by calling platform_device_put() before jumping to the common
cleanup path.
Also, the unreg_driver label incorrectly calls
platform_driver_register() instead of platform_driver_unregister(),
which breaks cleanup when workqueue creation fails after successful
driver registration. Fix that as well.
The reference leak was identified by a static analysis tool I developed
and confirmed by manual review. The incorrect cleanup call was found
during code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Move jump_label_init() before parse_early_param()
When enabling both CONFIG_MEM_ALLOC_PROFILING=y and
CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory
profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will
cause the kernel failed to boot.
After analysis, this is because jump_label_init() must be called before
parse_early_param(), the early param handlers may modify static keys by
static_branch_enable/disable().
Fix this by moving jump_label_init() to before parse_early_param(). The
solution is similar to other architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix path resolution in ksmbd_vfs_kern_path_create
The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the
create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an
absolute path with convert_to_unix_name() and resolves it from AT_FDCWD
via start_creating_path(), so a ".." component is walked from the real
filesystem root and escapes the export.
An authenticated client races a missing path component so the rooted open
lookup returns -ENOENT (taking the create branch) while the same component
is present (a directory) when the create walk runs; the create then
resolves ".." out of the share.
Root the create walk at the share like the lookup and rename paths already
are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH,
&share_conf->vfs_path) and create the final component with
start_creating_noperm(). convert_to_unix_name() then has no callers and is
removed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix stack OOB write when prepending the Flags AD
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. At advertise time the
flags are still prepended, and the memcpy() writes 3 + adv_data_len
bytes into the size-byte buffer:
BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301)
Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65
Workqueue: hci0 hci_cmd_sync_work
__asan_memcpy (mm/kasan/shadow.c:106)
eir_create_adv_data (net/bluetooth/eir.c:301)
hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310)
hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:332)
This frame has 1 object:
[32, 64) 'cp'
The "Flags" structure is added by the kernel, not requested by
userspace, so only prepend it when it fits together with the instance
advertising data; when there is no room for both, drop the flags rather
than the user-provided data.
Reachable by a local user with CAP_NET_ADMIN owning an LE-only
controller on the legacy advertising path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent path traversal bypass by restricting caseless retry
ksmbd_vfs_path_lookup() enforces LOOKUP_BENEATH to restrict path
resolution within the share root. When a crafted path attempts to
escape the share boundary using parent-directory components ('..'),
vfs_path_parent_lookup() detects this and immediately fails,
returning -EXDEV.
However, a bug exists in __ksmbd_vfs_kern_path() under caseless mode.
The function fails to intercept the -EXDEV error and erroneously
falls through to the caseless retry logic, which is intended only
for genuinely missing files. During this retry process, the path
is reconstructed, leading to an unintended LOOKUP_BENEATH bypass
that allows write-capable users to create zero-length files or
directories outside the exported share.
Fix this by ensuring that the execution only proceeds to the caseless
lookup retry when the error is specifically -ENOENT. Any other errors,
such as -EXDEV from a path traversal attempt, must be returned immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use opener credentials for ADS I/O
Alternate data streams are stored as xattrs. Unlike regular file I/O,
their read and write paths therefore call VFS xattr helpers which recheck
inode permissions and LSM policy using the current task credentials.
Run ADS I/O with the credentials captured when the SMB handle was opened. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate NTLMv2 response before updating session key
ksmbd_auth_ntlmv2() derives the NTLMv2 session key into
sess->sess_key before it verifies the NTLMv2 response.
ksmbd_decode_ntlmssp_auth_blob() then continues into KEY_XCH even
when ksmbd_auth_ntlmv2() failed.
With SMB3 multichannel binding, the failed authentication operates on
an existing session and the session setup error path does not expire
binding sessions. A client can send a binding session setup with a
bad NT proof and KEY_XCH and still modify sess->sess_key before
STATUS_LOGON_FAILURE is returned.
Relevant path:
smb2_sess_setup()
-> conn->binding = true
-> ntlm_authenticate()
-> session_user()
-> ksmbd_decode_ntlmssp_auth_blob()
-> ksmbd_auth_ntlmv2()
-> calc_ntlmv2_hash()
-> hmac_md5_usingrawkey(..., sess->sess_key)
-> crypto_memneq() returns mismatch
-> KEY_XCH arc4_crypt(..., sess->sess_key, ...)
-> out_err without expiring the binding session
Derive the base session key into a local buffer and copy it to
sess->sess_key only after the proof matches. Return immediately on
authentication failure so KEY_XCH is only processed after successful
authentication. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: iowarrior: fix use-after-free on disconnect race
mutex_unlock() may access the mutex structure after releasing the lock
and therefore cannot be used to manage lifetime of objects directly
(unlike spinlocks and refcounts). [1][2]
Use a kref to release the driver data to avoid use-after-free in
mutex_unlock() when release() races with disconnect().
[1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic")
[2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most
other sleeping locks, can still use the lock object
after it's unlocked") |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page
nvmet_execute_disc_get_log_page() validates only the dword alignment
of the host-supplied Log Page Offset (lpo). The 64-bit offset is then
added to a small kzalloc'd buffer that holds the discovery log page
and the result is passed straight to nvmet_copy_to_sgl(), which
memcpy()s data_len bytes out to the host with no source-side bound
check:
u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */
size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */
...
if (offset & 0x3) { ... } /* only check */
...
alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req);
buffer = kzalloc(alloc_len, GFP_KERNEL);
...
status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len);
The Discovery controller is unauthenticated -- nvmet_host_allowed()
returns true unconditionally for the discovery subsystem -- so the call
is reachable pre-authentication by any TCP/RDMA/FC peer that can reach
the nvmet target. With a discovery log page of ~1 KiB, an attacker
requesting up to 4 KiB starting at offset == alloc_len reads the next
slab page out and gets its content returned over the fabric (an
empirical run on a default nvmet-tcp loopback target leaked 81
canonical kernel pointers in one Get Log Page response). Pointing the
offset at unmapped kernel memory faults the in-kernel memcpy and
crashes (or panics, on panic_on_oops=1) the target host instead.
The attacker-controlled source-side offset pattern
"nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique
to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every
other Get Log Page handler in admin-cmd.c either ignores lpo (and
silently starts every response at offset 0) or tracks a local
destination offset with a fixed source pointer.
Validate the host-supplied offset against the log page size, cap the
copy length to what is actually available, and zero-fill any remainder
of the host transfer buffer. The zero-fill matches the existing
short-response pattern in nvmet_execute_get_log_changed_ns()
(admin-cmd.c) and prevents leaking transport SGL contents when the
host asks for more bytes than the log page contains. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: teardown bugs and resource leaks
Address several teardown issues and resource leaks in the driver's remove
path and error handling:
1. Debounce clock reference leak: The debounce clock (bank->db_clk) is
obtained using of_clk_get() which increments the clock's reference
count, but clk_put() is never called. Register a devm action to
cleanly release it on unbind. Note that of_clk_get(..., 1) remains
necessary over devm_clk_get() because the DT binding does not define
clock-names, precluding name-based lookup.
2. Unregistered chained IRQ handler: The chained IRQ handler is not
disconnected in remove(). If a stray interrupt fires after the driver
is removed, the kernel attempts to execute a stale handler, leading
to a panic. Fix this by clearing the handler in remove().
3. IRQ domain leak: The linear IRQ domain and its generic chips are
allocated manually during probe but never removed. Remove the IRQ
domain during driver teardown to free the associated generic chips
and mappings.
[Bartosz: don't emit an error message on devres allocation failure] |
